Microstrip Structures
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. A Design of a Compact Microwave Diplexer in Microstrip Technology Based on Bandpass Filters Using Stepped Impedance Resonator
Abstract This paper describes the design of a compact microstrip microwave diplexer based on bandpass filters and a stepped impedance resonator for 4G applications. The diplexer is composed of two band-pass filters (BPF) that operate at 1.8 and 2.5 GHz. Both bandpass filters for the receiver at 1.705-1.895 GHZ and the transmitter at 2.41-2.6 GHZ have a -3dB
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Design and Performance Study of Single and Multi-Layered Fractal Based Miniaturized Patch Antennas for 2.4 GHz Applications
Abstract The design and characterization of single and multi-layered miniaturized microstrip antennas resonating at 2.4 GHz are proposed. The miniaturization is accomplished by fractal Defected Ground Structure (DGS). The DGS used for miniaturization is a Modified Minkowski Fractal DGS (M-MFDGS). The proposed size reduction process with M-MFDGS follows the s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
3. Project and Analysis of Quasi-Periodic PBG for Microstrip Antenna
Abstract In this work the influence of quasi-periodic distributions of air holes with 6, 12 and 6-fold modified symmetries, applied to the substrate of a rectangular microstrip patch antenna are analyzed. To validate the study, parameters such as S11 parameter, bandwidth, total gain, radiation pattern and electric field were investigated through computationa
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
4. Design and Fabrication of a Novel Compact Low-loss Microstrip Diplexer for WCDMA and WiMAX Applications
Abstract In this paper, a novel miniaturized microstrip diplexer using two bandpass filters (BPFs) is designed and fabricated. The filters consist of stub loaded coupled lines. Additional stubs and T-shape feeding structures are added to miniaturize the size of the presented diplexer. With the adopted special structure, low insertion losses and compact size
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 11/11/2019
-
5. Substrate Integrated Waveguide (SIW) Bandpass Filter with Novel Microstrip-CPW-SIW Input Coupling
Abstract A Substrate integrated waveguide bandpass filter is presented with a novel CPW-to-SIW transition at both the input and output ports which also served as the input and output couplings into the filter. The CPW-to-SIW transition structures presented here exploited the step impedance between the 50 ohms input/output feedline and the transition to contr
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-04
-
6. New Design Procedure to Determine the Taper Transition for Impedance Matching Between Microstrip Line and SIW Component
Abstract Normally the physical dimensions of the taper transition that realizes the impedance matching between the impedance of the feeding line built in microstrip line technology and the impedance of the component built in Substrate Integrated Waveguide (SIW) technology are obtained by computational optimization processes due the difficulty of analytical t
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-09
-
7. Design of a Microstrip Diplexer and Triplexer Using Open Loop Resonators
Abstract In this paper a novel design of microstrip diplexer and triplexer using open loop resonators is presented. The proposed diplexer if formed by two band-pass filters for the Industrial Scientific Medical (ISM) applications at 5.8 GHz and the WIMAX applications (IEEE 802.16 WiMAX at 3.17 GHz to 4.2 GHz bands). The microstrip triplexer is designed for t
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2016-06
-
8. Design of K-Band Substrate Integrated Waveguide Band-Pass Filter with High Rejection
Abstract This article presents the design of K-band Substrate Integrated Waveguide (SIW) Band-pass filter with high rejection, by using the topology with iris and the SIW resonators. The simulated results of this filter have shown that the passband is from 17.3 GHz to 19.3 GHz, while the insertion loss is 1.35 dB within 10.9 % bandwidth around 18.3 GHz and i
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-12
-
9. Simulation and manufacturing of a miniaturized exponential UWB TEM horn antenna for UWB radar applications
This paper presents the parameterization of the structure of a miniaturized exponential UWB TEM horn antenna and its effect on the matching impedance and directivity. In addition, a microstrip balun that feeds the antenna was proposed in order to improve the balance, and the return loss for low frequencies. Both the antenna and the microstrip balun were simu
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
10. Analysis of microstrip antennas on carbon fiber composite material
In this paper a truncated corner rectangular microstrip antenna (TCRMA) is analyzed in the presence of carbon fiber composite (CFC) material. Simplified carbon fiber composite models are proposed and the analyses are performed by the electromagnetic simulator Computer Simulation Technologies (CST). Theoretical and experimental results of return loss, axial r
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2012-06
-
11. Análise teórica e experimental de superfícies seletivas de freqüência e suas aplicações em antenas planares
This work presents a theoretical and numerical analysis of structures using frequency selective surfaces applied on patch antennas. The FDTD method is used to determine the time domain reflected fields. Applications of frequency selective surfaces and patch antennas cover a wide area of telecommunications, especially mobile communications, filters and WB ant
Publicado em: 2009
-
12. Análise neurocomputacional de Antenas de microfita multibanda para sistemas de comunicação sem fio
This work presents a study of implementation procedures for multiband microstrip patch antennas characterization, using on wireless communication systems. An artificial neural network multilayer perceptron is used to locate the bands of operational frequencies of the antenna for different geometrics configurations. The antenna is projected, simulated and tes
Publicado em: 2007