Microstructural Analysis
Mostrando 1-12 de 195 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Microbial activity and studies on excavated megalithic micaceous potsherds from Peninsular India
Abstract The abundantly available mica flakes were added in raw materials to manufacture pottery in Central Peninsular India during the early Iron Age (700-300 BCE) for storage and glittering. The micaceous potsherds from the excavated megalithic site of Nagpur were studied for their composition, manufacturing techniques, microstructural features, microbial
Cerâmica. Publicado em: 2021-06
-
3. O Que Faz um Artigo ser Mais Citado?
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
Rev. adm. contemp.. Publicado em: 2020-12
-
4. Structure and tectonic significance of high- and low-temperature deformation along the lateral escape-related Guaçuí and Batatal shear zones, southern Araçuaí Orogen (southeastern Brazil)
Abstract The Guacuí and Batatal lineaments in the southern region of the state of Espírito Santo (southeastern Brazil) can be traced from satellite images for tens of kilometers. They are considered shear zones associated to the final tectonic stages of the Araçuaí-West Congo (A-WC) Orogen during the Ediacaran-Cambrian period. In order to understand thei
REM, Int. Eng. J.. Publicado em: 2020-12
-
5. Discrimination of pores and cracks in iron ore pellets using deep learning neural networks
Abstract The discrimination between pores and cracks is an important step in the microstructural analysis of iron ore pellets. While the porosity is fundamental during the reduction process in blast furnaces, cracks are strongly detrimental to the mechanical strength. The usual image processing tools cannot automatically discriminate between these two types
REM, Int. Eng. J.. Publicado em: 2020-06
-
6. Quantification of Discontinuities in Welded Joints Using Gamma Tomography
Gamma tomography was used in this work to evaluate the recurrent defects in welding processes in naval steel sheets. It was used a first-generation equipment consisting of a source of Cesium-137, with activity of the order of 200 mCi, coupled to a Thallium-doped Sodium Iodide detector, NaI (Tl). For the study, specimens were produced in ASTM A131-AH36 steel
Mat. Res.. Publicado em: 20/12/2019
-
7. Morphology, Crystalline Structure and Chemical Composition Of MAO Treated Ti-15Zr-Mo Surfaces Enriched with Bioactive Ions
In this study, MAO treatment was used to enrich, with bioactive Ca, Mg and P atoms, as-casted and heat-treated Ti-15Zr-xMo (x = 0, 5, 10 and 15 wt%) alloys, for potential use as advanced metallic biomaterials. The chemical composition of the surface was evaluated by EDS and XPS measurements. The morphology and microstructure was analyzed by OM and SEM images
Mat. Res.. Publicado em: 09/12/2019
-
8. Microstructural Evolution and Phase Transformation of a Ti-5Nb-5Al Alloy During Annealing Treatment
The microstructural evolution and phase transformation of a Ti-5Nb-5Al alloy during isothermal annealing treatment were studied in this paper. The microstructural evolution was analyzed by X-ray diffraction (XRD), scanning electron microscope (SEM) equipped with X-ray energy dispersive spectroscopy (EDS) and electron backscattering diffraction (EBSD). The fi
Mat. Res.. Publicado em: 05/12/2019
-
9. Phase and microstructural analysis of NdTi0.8M0.2O3.4 (M = Al, Ga) microwave ceramics
ABSTRACT In this paper, we report the characterization of NdTi0.8M0.2O3.4 (M = Ga, Al) ceramics prepared via mixed oxide solid state sintering route. X-ray diffraction analysis of the samples revealed the formation of single phase for NdTi0.8Ga0.2O3.4 sample while secondary phase was formed in the case of NdTi0.8Al0.2O3.4. Microstructural analysis of the sam
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Microstructural Analysis of AgIn5VI8 (VI: S, Se, Te) Ternary Semiconductors by X-Ray Diffraction
This work is a study of the microstructural properties of the polycrystalline ternary compounds AgIn5S8, AgIn5Se8, and AgIn5Te8 by X-ray diffraction technique (XRD). The full-width-half-maximum (FWHM) of the XRD profile is measured as function of the diffraction angle and used to estimate the microstructural parameters. In general, a microstructural characte
Mat. Res.. Publicado em: 14/11/2019
-
11. Effect of The Incorporation of Micro and Nanoparticles of Calcium Carbonate in Poly (Vinyl Chloride) Matrix for Industrial Application
This study aimed at evaluating the effects of the incorporation of micro and nanoparticles of CaCO3 on the properties of poly(vinyl chloride) (PVC), intended to industrial application. The PVC compounds added with particles of different sizes were achieved in an intensive mixer. Rheological, microstructural, mechanical and thermal properties of the compounds
Mat. Res.. Publicado em: 14/10/2019
-
12. Development of Sustainable Eggshell Waste-Polyester Resin Composite Material for Using as Artificial Rock
The aim of this work was to study the possibility of reuse of chicken eggshell waste produced in the food manufacturing industry for processing of sustainable eggshell waste-polyester resin composite materials for use as artificial carbonaceous rocks. For this purpose, composite specimens with different eggshell waste-polyester resin compositions in differen
Mat. Res.. Publicado em: 14/10/2019