Microstructure Characterization
Mostrando 1-12 de 192 artigos, teses e dissertações.
-
1. ERRATUM
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Arq. Neuro-Psiquiatr.. Publicado em: 2021-06
-
2. Polyamide 11 porous films by NIPS: the influence of miscibility and polymer crystalline formation in pores structure and morphology
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Quím. Nova. Publicado em: 2021-06
-
3. Heterotopic Heart Transplant History and Concepts Cannot Be Neglected - Witnessing the History and Learning with Previous Practices
This study described the morphology, crystallinity, thermal and mechanical characterization of Polyamide 11 (PA11) porous film prepared by non-solvent induced phase separation (NIPS) method using formic acid (FA) as solvent. In addition, the miscibility of PA11/FA/H2O system was performed to generate a ternary phase diagram. The porous films morphology was i
Braz. J. Cardiovasc. Surg.. Publicado em: 2021-06
-
4. Microstructure and Thermal Analyses of Cu87-xAl13Nbx High-Temperature Shape Memory Alloys
This paper presents a thermal and microstructural characterization of Cu87-xAl13Nbx (wt%) high temperature shape memory alloys (HTSMA), with Nb contents ranging from 1 to 3%. The alloys were obtained by arc melting under argon atmosphere. Thermal characterization was performed by differential scanning calorimetry (DSC), revealing that the phase martensitic t
Mat. Res.. Publicado em: 28/11/2019
-
5. Microstructural Analysis of AgIn5VI8 (VI: S, Se, Te) Ternary Semiconductors by X-Ray Diffraction
This work is a study of the microstructural properties of the polycrystalline ternary compounds AgIn5S8, AgIn5Se8, and AgIn5Te8 by X-ray diffraction technique (XRD). The full-width-half-maximum (FWHM) of the XRD profile is measured as function of the diffraction angle and used to estimate the microstructural parameters. In general, a microstructural characte
Mat. Res.. Publicado em: 14/11/2019
-
6. Effect of Rolling Temperature on Microstructure and Mechanical Properties of a Nb-Mo Microalloyed Medium Mn Steel
Warm rolling of medium Mn steel is a promising technology to meet the needs of vehicle weight reduction and energy conservation while ensuring the safety for passengers. In this study, a novel Nb-Mo microalloyed 6.6Mn steel was subjected to a series of warm rolling tests at temperatures ranging from 630 to 690 ºC, based on the thermodynamic-based prediction
Mat. Res.. Publicado em: 11/11/2019
-
7. Characterization of Different Surface Layers Produced by Solid Boron-Nitro-Carburizing Thermochemical Treatment on AISI 1020
The aim of this study is to obtain and characterize surface layers on low carbon steel with the pack boron-nitro-carburizing process. Different mixtures of commercial powders (Turbonit® and Ekabor®) were used to investigate the case properties, microstructure and phases formation on AISI 1020 steel. A series of experiments were conducted in solid medium wi
Mat. Res.. Publicado em: 04/11/2019
-
8. Microstructure and Electrical Characterization of Thermoelectric Nanocrystalline Bi2 Te3 Synthesized by Mechanical Alloying
Nanocrystalline bismuth telluride, Bi2Te3 has been synthesized by mechanical alloying (MA) the powder mixture composed of Bi and Te in the inert gas atmosphere within a short duration of 15 min. Microstructure characterization of the prepared powder has been investigated adopting the Rietveld’s method using X-Ray diffraction (XRD) data and analyzing high-r
Mat. Res.. Publicado em: 28/10/2019
-
9. Fiber concentrates from asparagus by-products: Microstructure, composition, functional and antioxidant properties
RESUMO O subproduto do processamento de aspargo possui alto teor de nutrientes e compostos bioativos. Com base nisto, torna-se interessante a investigação de opções de tratamento para a obtenção de produto com melhor qualidade nutricional evitando seu desperdício e, consequentemente, seu impacto ambiental. O objetivo deste trabalho foi produzir e cara
Ciênc. agrotec.. Publicado em: 30/09/2019
-
10. Mechanical Properties and Metallurgical Characterization of LM25/ZrO2 Composites Fabricated by Stir Casting Method
ABSTRACT Zirconia (ZrO2) dispersed aluminum alloy metal matrix composites produced by stir casting techniques. Using stir casting techniques, aluminium based composites with varying amounts of 3%, 6%, 9%, and 12% of zirconia by weight are fabricated. The prepared samples were subjected to physical, mechanical,tribiology and microstructure investigation. The
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Effect of Sigma Phase Precipitated at 850 °C on Corrosion Behaviour of UNS S82441 Duplex Stainless Steel
ABSTRACT Duplex stainless steels (DSS) are alloys with binary microstructure consisting of ferrite (δ) and austenite (γ), combining high mechanical properties and corrosion resistance by pitting and stress corrosion, due to the two phases austenite/ferrite. However, the formation of secondary and intermetallic phases, during solidification processes, heat
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Carregamento e caracterização do fármaco carboplatina na microestrutura microporosa do biomaterial granulado bifásico micro e nanoestruturado de fosfato de cálcio
RESUMO As biocerâmicas bifásicas hidroxiapatita/fosfato tricálcico-beta (HA/TCP-β) microporosas são pesquisadas e se destacam em aplicações biomédicas como substitutos dos tecidos ósseos. Estes biomateriais são biocompatíveis e apresentam microestruturas microporosas interconectadas, que permitem sua utilização no reparo do tecido ósseo. Devido
Matéria (Rio J.). Publicado em: 16/09/2019