Microwave Filters
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. A Design of a Compact Microwave Diplexer in Microstrip Technology Based on Bandpass Filters Using Stepped Impedance Resonator
Abstract This paper describes the design of a compact microstrip microwave diplexer based on bandpass filters and a stepped impedance resonator for 4G applications. The diplexer is composed of two band-pass filters (BPF) that operate at 1.8 and 2.5 GHz. Both bandpass filters for the receiver at 1.705-1.895 GHZ and the transmitter at 2.41-2.6 GHZ have a -3dB
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Phase Adjustment of S-Parameters from Coupled Resonator Filters
Abstract This paper presents a method to cancel the constant phase loading and transmission line that are added to the S-parameters of coupled resonant networks. Thus, the phase-corrected S-parameters may be used to obtain a rational model together with its representative coupling matrix. This method is applicable to lossy and lossless coupled resonator netw
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Characterization of the Ge/Bi2O3 Interfaces
In this article, the properties of the Ge/Bi2O3 interfaces as microwave cavities are reported and discussed. The interface is composed of monoclinic Bi2O3 films grown onto polycrystalline cubic Ge substrate. It is observed that consistent with the theoretical design of the energy band diagram, the experimental current-voltage characteristics of the Yb/Ge/Bi2
Mat. Res.. Publicado em: 04/04/2019
-
5. A Novel Design of an H-shaped Microstrip Diplexer
Abstract In this paper, a new microstrip diplexer using modified H-shaped resonators with a compact size and high isolation is presented. This circuit is designed for the ISM band at 2.4 GHz and GPS at 1.575 GHz. The proposed diplexer is formed by connecting two band-pass filters designed by using the modified H-shaped resonator and tapped microstrip Input/o
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
6. A new microstrip diplexer using open-loop resonators
In this paper, a new microstrip diplexer using open loop resonators with compact size and high isolation is designed and fabricated for the WLANs (IEEE 802.11b/g at 2.4 GHz and IEEE 802.11a at 5.2 GHz) applications. The diplexer is formed by two dual-mode band pass filters (BPFs) using an asymmetric fork-form feed line and two open loop resonators. The diple
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2014-12
-
7. Síntese e projeto de filtros reconfiguráveis de microondas utilizando ressoadores tipo patch. / Synthesis and design of tunable microwave bandpass filters using planar patch resonators.
O objetivo desta tese é o projeto e a síntese de filtros passa-faixa sintonizáveis em frequências de micro-ondas utilizando ressoadores planares tipo patch. As características dos filtros projetados, tais como frequência central, largura de banda e/ou seletividade, são eletronicamente ajustadas por uma tensão de controle DC. Uma metodologia para a co
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/05/2011
-
8. An improvement of defected ground structure lowpass/bandpass filters using H-slot resonators and coupling matrix method
A novel compact wideband high-rejection lowpass filter (LPF) using H-DGS is presented. The proposed filter has neither open stub nor cascaded high-low impedance elements. It consists of two coupled H-slots in the ground plane along with a compensated line. The effect of the new slot on the filter performance is examined. The comparison with the conventional
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2011-12
-
9. Statistical modeling of manufacturing uncertainties for microstrip filters
This work presents a technique to characterize the errors that occur in the process of manufacturing into electromagnetic simulations of microwave devices. The procedure combines the unscented transform (UT) with simulations. The use of the UT allows efficient use of computational resources for the characterization of the random variables modeling the uncert
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2011-06
-
10. Flexible tunable spectrum sliced microwave photonic filter using parallel Fabry-Pérot filters and Fiber Bragg Grating
A simple and low-cost spectrum sliced microwave photonic filter with high tunability has been implemented. This is based on use of two Fabry-Pérot filters with same free spectral range connected in parallel but one filter with an external fiber delay. An extension of this configuration with Fiber Bragg Grating (FBG) as delay element is also demonstrated. Th
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2010-12
-
11. Aplication of unscented transformed (ut) for design filters microwave / Aplicação da transformada de incerteza (ut) para projeto de filtros de microondas
The manufacture of complex filters and their tests depend on electromagnetic simulation for validation and correct analysis. However, in the filter assembly, the fabrication process introduces new sources of uncertainty that are difficult to model with the electromagnetic simulator. The result may be significant differences between the simulated responses an
Publicado em: 2010
-
12. Miniaturization techniques for dielectric filters at microwave frequencies / Tecnicas de miniaturização de filtros dieletricos em microondas
O trabalho mostra o desenvolvimento de um filtro na faixa de frequência de micro-ondas e sua construção usando ressoadores dielétricos de alta permissividade elétrica. A partir da definição matemática de uma função de transferência do tipo entrada-saída, que caracteriza um filtro, e do uso da teoria de síntese de redes, vista de um modo bastante
Publicado em: 2009