Mixer Settler
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. EXPERIMENTAL DATA, THERMODYNAMIC MODELING AND SENSITIVITY ANALYSES FOR THE PURIFICATION STEPS OF ETHYL BIODIESEL FROM FODDER RADISH OIL PRODUCTION
Abstract The goals of this work were to present original liquid-liquid equilibrium data of the system containing glycerol + ethanol + ethyl biodiesel from fodder radish oil, including the individual distribution of each ethyl ester; to adjust binary parameters of the NRTL; to compare NRTL and UNIFAC-Dortmund in the LLE representation of the system containing
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
2. Comparação entre planejamento estatístico experimental e análise dimensional em operações de mistura e separação para sistema óleo-água
Este trabalho objetiva determinar a melhor metodologia para auxiliar na predição de variáveis operacionais de um novo design de misturador-decantador aplicado ao tratamento de águas produzidas da indústria do petróleo, que vem sendo denominado de MDIF (Misturador-Decantador à Inversão de Fases). Os dados utilizados neste estudo foram obtidos da Unida
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/09/2011
-
3. Dispersed phase holdup in a pulsed disc and doughnut extraction column
Dispersed phase holdup has been measured in a 76 mm diameter pulsed disc and doughnut extraction column for three different liquid-liquid systems. The effects of operational variables such as pulsation intensity and dispersed and continuous phase flow rates on holdup have been investigated and found to be significant. The existence of three different operati
Brazilian Journal of Chemical Engineering. Publicado em: 2011-06
-
4. Mass transfer coeficients in pulsed perforated-plate extraction columns
This study examined the mass transfer performance in a pulsed perforated-plate extraction column with diameter of 50 mm using two different liquid systems. Mass transfer coefficients have been interpreted in terms of the axial diffusion model. The effects of pulsation intensity and dispersed and continuous phase velocities on the mass transfer performance ha
Brazilian Journal of Chemical Engineering. Publicado em: 2010-06
-
5. Drop size in a liquid pulsed sieve-plate extraction column
The (Benzoic acid + kerosene + water) system was studied in a 5.0 cm diameter liquid pulsed liquid-liquid extraction column with a total number of 80 sieve plates. The effect of pulsation intensity, dispersed phase superficial velocity, and continuous phase superficial velocity on volume-surface mean diameter was studied. Generally, the mean drop diameter de
Brazilian Journal of Chemical Engineering. Publicado em: 2009-12
-
6. Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF) / Level feedback control using an image-based detector applied to a mixer-settler based on phase inversion equipment (MDIF).
O tratamento de águas residuais contaminadas com óleo é um assunto de grande interesse prático, principalmente no que se refere às questões ambientais. Um processo bastante relevante que vem sendo estudado no tratamento semi-contínuo de águas contaminadas com óleo é o Misturador-Decantador à Inversão de Fases (MDIF). Uma variável importante na o
Publicado em: 2009
-
7. Mass transfer coefficients in a hanson mixer-settler extraction column
The volumetric overall mass transfer coefficients in a pilot plant Hanson mixer-settler extraction column of seven stages have been measured using toluene-acetone-water system. The effects of agitation speed and dispersed and continuous phases flow rates on volumetric overall mass transfer coefficients have been investigated. The results show that the volume
Brazilian Journal of Chemical Engineering. Publicado em: 2008-09
-
8. Aperfeiçoamento no projeto de um protótipo de misturador-decantador à inversão de fases visando aplicação na indústria do petróleo
In the oil industry the mixture oil/water occurs in the operations of production, transportation and refining, as well as during the use of its derivatives. The amount of water produced associated with the oil varies and can reach values of 90% in volume in the case of mature phase of the production fields. The present work deals with the development of new
Publicado em: 2008
-
9. Projeto e Operação em Escala Semi-Industrial de um Equipamento para Tratamento de Águas Produzidas na Indústria do Petróleo Utilizando Nova Tecnologia: misturador-decantador à inversão de fases - MDIF
Este trabalho tem por objetivo utilizar uma nova tecnologia no tratamento de águas produzidas da indústria do petróleo. Uma Unidade de Tratamento de Águas Produzidas, denominada UT-MDIF, foi projetada, instalada e operou dentro de uma planta industrial de tratamento de efluentes de petróleo. Esta Unidade de Tratamento piloto utiliza o método de separa�
Publicado em: 2006
-
10. Recuperação de zinco presente em efluentes industriais produzidos pela Votorantim Metais unidade Três Marias utilizando-se a técnica de extração líquido-líquido
Um dos principais desafios enfrentados atualmente pelas empresas dos setores químico e mineral reside no tratamento de seus efluentes e resíduos. Estes materiais podem promover a contaminação dos solos e dos recursos hídricos se lançados no meio ambiente de forma inadequada ou sem tratamento, ou ainda quando acondicionados inapropriadamente. Neste cont
Publicado em: 2006
-
11. Estudo da hidrodinâmica de um novo separador líquido-líquido: aplicação ao sistema óleo-bruto/água produzida / Study of the hydrodynamics of a new separator for liquid-liquid systems: application to the system crude oil/waste water
This work aims to use a different hydrodynamic condition applied to a new design of mixer-settler on treating wastewater produced by petroleum industry, called MDIF (Misturador-Decantador à Inversão de Fases/ Mixer-Settler based on Phase Inversion MSPI). The use of this different hydrodynamic behaviour is possible due to vertical disposition of the device
Publicado em: 2005
-
12. Recuperação de efluentes industriais em colunas pulsadas
About 290.000 tons of stainless steel is produced annually in Brazil. This quantity is pickling along the production line to remove the surface of oxides, which form in the finishing stages of the steelmaking process. The pickling bath is a mixture of nitric and hydrofluoric acids and is used until the iron concentration has reached 40 - 80 g/l. At this stag
Publicado em: 1998