Mixing Gel
Mostrando 1-12 de 75 artigos, teses e dissertações.
-
1. Binary systems of Brij® surfactants with Pluronic® F127 as griseofulvin carrier
The binary mixtures of Brij® surfactant and Pluronic® F127 were studied as carriers of griseofulvin. The F127 systems and Brij® 78 (C18H37E20), Brij® 98 (C18H35E20) and Brij® 700 (C18H37E100) were prepared in the proportions 10/90, 30/70, 50/50 and 70/30, respectively. The characterizations were carried out by tube inversion, rheology, particle size, an
Quím. Nova. Publicado em: 2017-04
-
2. Optimizing light-cured composite through variations in camphorquinone and butylhydroxytoluene concentrations
Abstract The use of a free-radical polymerization inhibitor, butylhydroxytoluene (BHT), and a common photo-initiator, camphorquinone (CQ), to reduce polymerization stress in dental composite was investigated in this study. Samples were prepared by mixing Bis-GMA, UDMA, and TEGDMA at a 1:1:1 ratio (wt%), and silanized borosilicate glass fillers at 70 wt% were
Braz. oral res.. Publicado em: 20/05/2016
-
3. Chitosan-collagen biomembrane embedded with calcium-aluminate enhances dentinogenic potential of pulp cells
Abstract The development of biomaterials capable of driving dental pulp stem cell differentiation into odontoblast-like cells able to secrete reparative dentin is the goal of current conservative dentistry. In the present investigation, a biomembrane (BM) composed of a chitosan/collagen matrix embedded with calcium-aluminate microparticles was tested. The BM
Braz. oral res.. Publicado em: 26/04/2016
-
4. Preparation and Characterization of Maleic Anhydride Grafted Poly(Hydroxybutirate-CO-Hydroxyvalerate) – PHBV-g-MA
A compatibilizer agent was successfully produced by grafting maleic anhydride (MA) to poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) chains on a reactive processing by mechanical mixing, using a mixture of PHBV, MA and dicumyl peroxide (DCP) as initiator. The resulting PHBV grafted MA (PHBV-g-MA) was characterized by Fourier transform infrared (FTIR) spectr
Mat. Res.. Publicado em: 12/02/2016
-
5. AvaliaÃÃo do desempenho de ligante asfÃltico modificado por poli (Ãcido fosfÃrico) (PPA) e efeitos da adiÃÃo do lÃquido da casca da castanha de caju (LCC). / Performance evaluation of asphalt binder modified poly (phosphoric acid) (PPA) and effects adding the liquid from the bark of cashew (LCC)
The AC with 50/70 penetration grade (Petrobras - LUBNOR), pure and modified by polyphosphoric acid (PPA), was analyzed by rheological tests (viscosity and DSR), thermal analysis (TGA and DSC), spectrometric (NMR and FTIR) and chromatographic (TLC-FID and GPC) methods. The interaction of AC with PPA was investigated from the reactions of its fractions (aromat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/12/2011
-
6. Characterization of the calcium-fluoroaluminosilicate glass prepared by a non-hydrolytic sol-gel route for future dental application as glass ionomer cement
Glass ionomer cements are widely employed in dentistry due to their physical, biological and mainly anti-caries properties. Glass ionomers consist of an aluminosilicate glass matrix modified with other elements, and they contain large quantities of fluorine. In this study, we report on the preparation of calcium-fluoroaluminosilicate glasses by a nonhydrolyt
Materials Research. Publicado em: 2009-06
-
7. Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos
In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 C for 2 hours, calcined at 800 C for 6h in air atmosphere. In gel-combustion method were produced and oxi
Publicado em: 2009
-
8. Performance of radar absorbing nanocomposites by waveguide measurements
Sol-gel synthesis has been investigated in order to produce stoichiometric compositions of Ba3Co2Fe24O41 (Co2Z) at lower calcination temperatures, using citric acid as quelant complex. Using this method, Co2Z ferrite could be synthesized at 950 °C, about 400 °C lower than that of conventional method. Nanocomposites (80:20% weight) of this ferrite with poly
Materials Research. Publicado em: 2008-09
-
9. Preparation of hybrid biomaterials for bone tissue engineering
Tissue engineering has evolved from the use of biomaterials for bone substitution that fulfill the clinical demands of biocompatibility, biodegradability, non-immunogeneity, structural strength and porosity. Porous scaffolds have been developed in many forms and materials, but few reached the need of adequate physical, biological and mechanical properties. I
Materials Research. Publicado em: 2007-03
-
10. Suspensões magneto-reologicas de pos de ferro carbonilo : um estudo da influencia das propriedades magneticas e do tamanho das paritculas / Magneto-rheological suspensions: a study of the influence of the magnetic properties and particle size of carbonyl iron powder
The particle size distribution and magnetic susceptibility of some commercial carbonyl iron powders (code names CC, CS, HQ, OX and SM) were measured. The particle size of the powders increases as follows: HQ
Publicado em: 2005
-
11. Geleificação de sistemas simples e mistos de isolados proteicos de soja e de soro de leite. / Geleificação of simple and mixing systems of isolated protéicos of soy and milk serum.
A influência do pH (3,5 e 7,0); da temperatura de aquecimento (80 e 95 ºC) e da concentração de proteína (8 a 14%) na obtenção de géis de isolados protéicos comerciais de soja (IPS) e de soro de leite (IPSL) foi estudada em sistemas simples e mistos, nas proporções de IPS : IPSL 100 : 0; 80 : 20; 60 : 40; 40 : 60; 20 : 80; 0 : 100. Os géis simple
Publicado em: 2004
-
12. Preparation and general physical properties of polycrystalline PrBa2Cu3O7-y obtained from sol-gel precursors
Polycrystalline samples of PrBa2Cu3O7– y were prepared through two different routes: (a) mixing Pr6O11, BaCO3, and CuO; (b) sol-gel precursors. The samples were heat-treated in the temperature range 700 <= T <= 930 ºC and under different atmospheres, (Argon and air). Oxidation of these compounds, based on the results of thermogravimetric analysis, TGA, wa
Brazilian Journal of Physics. Publicado em: 2002-09