Modified Pulping
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. Utilization of banana stalk fiber as reinforcement in low density polyethylene composite
ABSTRACT Natural fibers could serve as viable and abundant alternatives to the expensive and non - renewable synthetic fibers as reinforcement in thermoplastic composites. The potentiality of banana stalk fiber at reinforcing a low density polyethylene matrix was examined in this study. Fibers were extracted from the stalk of banana plant and characterized f
Matéria (Rio J.). Publicado em: 2016-12
-
2. Avaliação do processo SuperBatchTM para produção de polpa celulósica a partir de Bambusa vulgaris / Evaluation of SuperBatch(TM) process for the production of pulp from Bambusa vulgaris
The present study aimed to evaluate and compare the kraft pulping conventional processes and SuperBatchTM for Bambusa vulgaris aiming the production of pulp unbleached (kappa number 58 ± 2). The raw material was characterized with respect to basic density, chemical composition and morphology of fibers, was analyzed an aqueous pre-extraction temperatures of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/09/2012
-
3. Avaliação das madeiras de Eucalyptus grandis x Eucalyptus urophylla e Acacia mearnsii para a produção de celulose kraft pelos processos convencional e Lo-Solids® / Evaluation of the woods of Eucalyptus grandis x Eucalyptus urophylla and Acacia mearnsii for the kraft pulp production on conventional and Lo-Solids® processes
Este trabalho teve como objetivo estudar o desempenho das madeiras de Eucalyptus grandis x Eucalyptus urophylla e Acacia mearnsii para a produção de celulose kraft pelos processos convencional e Lo-Solids® e avaliar a influência de dois níveis de deslignificação no desempenho dos processos de polpação e branqueamento e nas propriedades das polpas br
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/12/2011
-
4. Sodium lignosulphonate as agent of modification of lignocellulosic fiber surface and formulation of phenolic thermoset / Lignosulfonato de sódio como agente de modificação da superfície de fibras lignocelulósicas e da formulação de termorrígido fenólico
Due to the great current interest in biocomposites because of both the use of lignocellulosic fibers as reinforcers of polymer matrices and the production of matrices prepared from renewable raw material, this study has sought to improve the properties of phenolic thermosets using sodium lignosulphonate as a macromonomer, and the insertion of sisal fibers, e
Publicado em: 2010
-
5. Modificações da Celulose Kraft Branqueada de Eucalipto por Tratamento Térmico e de Radiação Ultravioleta
Cellulose is used like raw material on many products, it may be found in native form (cellulose I) or on its modified forms (cellulose II, III1, III2, IV1, and IV2). Cellulose is obtained by many processes and raw materials being, alkaline pulping of woods (hardwood/softwood) is most frequent. In time function cellulose products are modified since hydrolysis
Publicado em: 2009
-
6. Caracterização de ligninas de Eucalyptus spp. pela técnica de pirólise associada à cromatografia gasosa e à espectrometria de massas / Characterizing the lignins of Eucalyptus spp. by the pyrolysis technique associated to both gas chromatography and mass spectrometry
Lignin is one of the main wood components as well as the cellulose and hemicellulose. It is known that the composition of lignin relative to the amounts of unit syringyl (S) and guaiacyl (G) can affect the efficiency of the kraft pulping. Thus, this work was carried out to develop a methodology for the determination of the S/G relationship in the Eucalyptus
Publicado em: 2006
-
7. Influência da carga alcalina no processo de polpação Lo-Solids® para madeiras de eucalipto. / The influence of alkali charge on lo-solidsâ â pulping process for eucalyptus woods.
The main objective of this work was to study the influence of the alkali charge on Lo-Solidsâ modified kraft pulping process for eucalyptus, considering parameters as yield, rejects content, total dissolved solids materials and the pulp characteristics as kappa number, viscosity, carbohydrate composition and fibers dimensions. Woods from hybrids of Eucalypt
Publicado em: 2003
-
8. Red Xylem and Higher Lignin Extractability by Down-Regulating a Cinnamyl Alcohol Dehydrogenase in Poplar.
Cinnamyl alcohol dehydrogenase (CAD) catalyzes the last step in the biosynthesis of the lignin precursors, the monolignols. We have down-regulated CAD in transgenic poplar (Populus tremula X Populus alba) by both antisense and co-suppression strategies. Several antisense and sense CAD transgenic poplars had an approximately 70% reduced CAD activity that was