Mohr Coulomb
Mostrando 1-12 de 45 artigos, teses e dissertações.
-
1. Proposal of a failure envelope for artificially cemented sand
Abstract Soils are particulate materials, which often stand out for their low shear strength. In most cases, this aspect justifies adapting the geotechnical project for this characteristic, which can be even more problematic in the case of soft sands, since it often occurs in superficial layers in various parts of the metropolitan region of Fortaleza. Theref
REM - International Engineering Journal. Publicado em: 2022
-
2. Numerical analysis of soft soil improved with stone column technique
Abstract The present research aims to do a numerical study on the behavior of a test embankment reinforced with stone column spacing of 1.85 m in a square grid with an average diameter of 1.0 m and 11.35 m length. The case study investigated the work in a steel company (ThyssenKrupp), located in Santa Cruz, western region of Rio de Janeiro - Brazil, where a
REM, Int. Eng. J.. Publicado em: 2021-09
-
3. Analytical solution of circular tunnel in elastic-viscoplastic rock mass
Abstract This paper deals with a deep circular tunnel excavated in infinite homogeneous and isotropic elasto-viscoplastic rock mass subjected to a hydrostatic initial stresses. The tunnel is divided into the initial plastic, viscoplastic, and elastic zones. By combining the generalized Bingham model with Mohr-Coulomb yield criteria, analytical solutions of t
Lat. Am. j. solids struct.. Publicado em: 29/07/2019
-
4. Analytical Strain-softening Solutions of a spherical cavity
ABSTRACT This paper deals with a spherical cavity excavated in infinite homogeneous and isotropic strain-softening rock mass subjected to a hydrostatic initial stresses. By simplifying the strain-softening process of the post-failure region as a Multi-step Brittle-Plastic model (MBPM), analytical solutions of the spherical cavity are derived with the consid
Lat. Am. j. solids struct.. Publicado em: 16/05/2018
-
5. Formulação multi-escala para a análise de flexão de placas considerando processos dissipativos na microestrutura e acoplamento MEC/MEF
RESUMO Neste trabalho apresentam-se análises de flexão de placas compostas por materiais heterogêneos através de uma abordagem multi-escala. O macro-contínuo, representado neste trabalho pela placa, é modelado por uma formulação não-linear do Método dos Elementos de Contorno (MEC), que leva em conta o operador tangente consistente (CTO). A micro-es
Matéria (Rio J.). Publicado em: 22/06/2017
-
6. Static Limit Analysis of Reinforced Soil Structures by a Simple Finite Element and Second-Order Cone Programming
Abstract To discretize reinforced soil structures in plane strain and predict their collapse load, a simple three-node triangular finite element is formulated based on the static theorem of the limit analysis. The element satisfies the equilibrium equations and the mechanical boundary conditions in a weak sense. A modified Mohr-Coulomb yield surface is adopt
Lat. Am. j. solids struct.. Publicado em: 2017
-
7. Fracture Failure of Reinforced Concrete Slabs Subjected to Blast Loading Using the Combined Finite-Discrete Element Method
Abstract Numerical modeling of fracture failure is challenging due to various issues in the constitutive law and the transition of continuum to discrete bodies. Therefore, this study presents the application of the combined finite-discrete element method to investigate the fracture failure of reinforced concrete slabs subjected to blast loading. In numerical
Lat. Am. j. solids struct.. Publicado em: 2016-06
-
8. DISTRIBUIÇÃO DE TENSÕES EM MOLAR RESTAURADO PELA TÉCNICA ENDOCROWN / Stress distribution in molar restored Endocrown technique
Dentes tratados endodonticamente apresentam geralmente reduzida estrutura coronária e grande risco de falha biomecânica, quando comparados com dentes vitalizados, sendo, portanto, sua técnica restauradora um desafio para a Odontologia. O objetivo do presente estudo foi analisar, usando o método de elementos finitos (MEF), a distribuição de tensões em
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
9. Simulação numérica da construção de pilhas de estéril de mineração dispostas em encostas
Nas atividades que envolvem armazenamento de estéril de mineração é necessária, a realização de um estudo prévio do comportamento mecânico, tanto das pilhas de estéril, quanto do terreno de fundação. Face à complexidade relacionada a esse tipo de problema, a utilização de técnicas numéricas é indispensável, ainda que forneçam uma resposta
Rem: Rev. Esc. Minas. Publicado em: 2012-12
-
10. ESTUDO NUMÉRICO DO COMPORTAMENTO MECÂNICO DE PILHAS DE ESTÉRIL DE MINERAÇÃO / ESTUDO NUMÉRICO DO COMPORTAMENTO MECÂNICO DE PILHAS DE ESTÉRIL DE MINERAÇÃO
O objetivo desta dissertação consiste na aplicação do método dos elementos finitos (MEF), através da utilização do programa computacional ANLOG (Análise Não Linear de Obras Geotécnicas), para análise do comportamento mecânico, sob condição de equilíbrio estático e deformação plana, de pilhas de estéril de mineração, realçando os aspect
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/11/2011
-
11. NUMERICAL ANALYSIS OF SAND CONTROL METHODS IN OIL-PRODUCING ROCKS / ANÁLISE NUMÉRICA DE MEDIDAS DE CONTENÇÃO DE SÓLIDOS EM ROCHAS PRODUTORAS DE ÓLEO DO BRASIL
During the production steps of a petroleum well, issues regarding sand production may have hight costs due to damages in the equipment or reduction of the well¿s productivity. Such problems make the application of sand control systems in the completion phase one of the most complex and essential parts in the construction of the well. This work aims to simul
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/08/2011
-
12. Modelagem e simulação elastoplástica em elementos finitos / Elastoplastic modeling and simulation with the finite element method
Este estudo revisa os fundamentos da teoria da plasticidade incremental em uma formulação elastoplástica do comportamento no ponto material e sua ligação com o método dos elementos finitos. Documenta a implementação na linguagem de programação C++ dos modelos elastoplásticos de Drucker-Prager, Mohr-Coulomb e von Mises. É realizado uma série de s
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/03/2011