Molding
Mostrando 1-12 de 166 artigos, teses e dissertações.
-
1. The First-Year Follow-Up of a Cleft Lip and Palate Patient Treated With Nasoalveolar Molding (NAM)
Resumo Os objetivos da ortopedia pré-cirúrgica são permitir a correção cirúrgica com mínima tensão dos tecidos envolvidos e menor restrição ao crescimento craniofacial. O objetivo deste estudo foi avaliar os benefícios do modelo nasoalveolar (NAM) como terapia pré-operatória em um paciente com fissura labiopalatina bilateral seguida de labioplas
Braz. Dent. J.. Publicado em: 2020-04
-
2. Influences of the mesh in the CAE simulation for plastic injection molding
Abstract Although computer-aided engineering (CAE) software has been used for many years in the plastic industry, identifying the most appropriate mesh geometry and density remains a challenge. It can affect the accuracy of the simulation, the time and the costs. The evaluation of the most suitable mesh is not easy because the difficulties to obtain the real
Polímeros. Publicado em: 04/11/2019
-
3. Crosslinking starch/oat hull mixtures for use in composites with PLA
Abstract Modification of composite components has been proposed as a tool to improve their functional properties. The present work studied crosslinking of a starch/oat hull mixture by reactive extrusion with sodium trimetaphosphate (STMP), for application in composites with polylactic acid (PLA). The treated mixture was characterized regarding degree of subs
Polímeros. Publicado em: 10/10/2019
-
4. Mass Variation Rate, in Acidic Environment, of Polyhydroxybutyrate and Chitosan matrices with Potential Application as Controlled Drug Delivery System
Polymers such as the biocompatible polyhydroxybutyrate (PHB) and the polysaccharide chitosan (Chi), a pH-sensitive polymer, have been studied for drug delivery applications and scaffolds production. In this work, matrices of PHB and Chi were produced by compression molding (SPHB-Chi) and loaded with a broad-spectrum biocide chlorhexidine (CHX) (SPHB-Chi-CHX)
Mat. Res.. Publicado em: 30/09/2019
-
5. Saúde, estética e eficiência: relações entre práticas de consumo de alimentos as mulheres e seus corpos
Resumo Pesquisas sobre alimentação e corpo na sociedade de consumo apresentam crescente interesse entre acadêmicos de diversas áreas. O objetivo deste estudo foi compreender as relações entre as práticas de consumo de alimentos de mulheres e seus corpos. Para tanto, os autores utilizam a perspectiva da Teoria de Prática (TP) para acessar os component
Cad. EBAPE.BR. Publicado em: 30/05/2019
-
6. Rheological properties of low-density polyethylene filled with hydrophobic Co(Ni)-Al layered double hydroxides
Abstract Cobalt/aluminum and nickel/aluminum layered double hydroxide (LDH - M+2:Al molar ratio of 3:1) were intercalated with dodecylsulphate (DDS), laurate (LAU), stearate (STE) and palmitate (PAL) and used as filler in low-density polyethylene (LDPE) in percentages between 0.2 and 7.0wt%. After injection molding, the samples were submitted to morphologic
Polímeros. Publicado em: 01/04/2019
-
7. Development of Poly (butylene adipate-co-terephthalate) Filled with Montmorillonite-Polypyrrole for Pressure Sensor Applications
A novel pressure sensing material composed of poly (butylene adipate-co-terephthalate) (PBAT) and montmorillonite-polypyrrole (Mt-PPy) was prepared using melt mixing and injection molding. The structure and properties of the PBAT/Mt-PPy composites were evaluated and compared with those of the PBAT/PPy blends. The PBAT/Mt-PPy displays a very sharp insulator-c
Mat. Res.. Publicado em: 17/01/2019
-
8. Ambivalencias de las exhibiciones gimnásticas durante la dictadura cívico-militar en Uruguay (1973- 1985)
Resumo: A ginástica, na sua condição moderna, não deixou de se estabelecer entre a preocupação ética e estética do cuidado e modelagem do corpo. As grandes realizações características das exibições ginásticas tratam disso, articuladas entre a promoção, difusão e educação a partir de um modelo de corpo-homem-mulher-cidadão colocado no temp
Rev. Bras. Hist. Educ.. Publicado em: 14/01/2019
-
9. Thermomechanical Properties of Corn Starch Based Film Reinforced with Coffee Ground Waste as Renewable Resource
Abstract Starches polymeric films offer several advantages for the replacement of synthetic polymers due to their biodegradability, non-toxicity, availability and low cost. However, the high biodegradation potential can cause fragility, considering some fundamental mechanical properties. Therefore, starch based polymeric films were reinforced incorporating l
Mat. Res.. Publicado em: 07/01/2019
-
10. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018
-
11. Análisis comparativo de las propiedades mecánicas de un material compuesto reforzado con fibras de carbono y las de su matriz polimérica de resina epóxica
ABSTRACT In recent years composite materials have been developed for different applications in engineering areas. This paper first presents the tensile properties of a polymer, in this case an epoxy resin, to be used as the matrix of a fiber reinforced composite material. A study of the mechanical properties is presented, which was carried out by performing
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. On the creep behavior of carbon/epoxy non-crimp fabric composites
The use of composites in structural applications requires the study of specific properties to ensure that these materials are safe and an excellent option to replace some metals, for example. In the present study, vacuum assisted resin transfer molding (VARTM) was used prior to obtain carbon/epoxy non-crimp fabric composites. Dynamic mechanical analysis and
Mat. Res.. Publicado em: 26/02/2018