Mooring Systems
Mostrando 1-9 de 9 artigos, teses e dissertações.
-
1. Enhancement the Fatigue Life of Floating Breakwater Mooring System Using Tuned Liquid Column Damper
Abstract Safety is a key design criterion for floating structures. A high rate of mooring accidents has been reported over the past decades. Preventing mooring line failure is a key design objective for floating breakwater systems. The mooring system comprises sets of mooring lines anchored to the seabed. These components are exposed to highly cyclic nonline
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
2. Alternativas de tratamento da água de lastro em portos exportadores de minério de ferro. / Ballast water treatment alternatives in the iron ore ports exporting.
This thesis aims at making a technical and economic analysis of the ballast water treatment in Brazilian iron ore ports. Three distinct treatment alternatives were studied: (1) onshore ballast water treatment; (2) water desalination plant to ballast water treatment; (3) onboard ballast water treatment in shuttle tanker vessels operating in the mooring, where
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/03/2012
-
3. Estudo de viabilidade do sistema de ancoragem de uma unidade flutuante de produção e armazenamento \"FPSO\" acoplada a um sistema de completação seca \"TLWP\". / Mooring system feasibility study of a floating production and storage unit \"FPSO\" coupled to a dry tree system \"TLWP\".
The oil and gas production in Brazilian fields are commonly found in deep water and situated far away from the coast, reaching distances of more than 100 km as, for example, in the Campos Basin or Santos Basin. Due to the heavy oil and lack of pipeline infrastructure found in these fields, not only subsea equipments that must support high pressure but also l
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/03/2011
-
4. PREDICTING THE PERFORMANCE OF COMPONENTS FOR OFFSHORE MOORING SYSTEMS UNDER MONOTONIC AND CYCLIC LOADING / PREVISÃO DO DESEMPENHO DE COMPONENTES PARA SISTEMAS DE ANCORAGEM SOB CARREGAMENTOS MONOTÔNICOS E CÍCLICOS
Este trabalho apresenta a previsão do desempenho de três acessórios de união (manilha de união, elo Kenter e elo Multifuncional) utilizados em sistemas de ancoragem de unidades offshore, sob carregamentos monotônicos e cíclicos. Cinqüenta e sete modelos foram analisados pelo método de Elementos Finitos utilizando o software Ansys 10. Inicialmente, c
Publicado em: 2008
-
5. Methodology of structural analysis and post-processing from offshore system simulations. / Metodologia de análise estrutural e pós-processamento a partir de simulações do comportamento de sistemas oceânicos.
This work presents a methodology developed to treat the hydrodynamic analysis of an offshore system conjointly with its structural analysis; the same methodology also allows for combined post-processing of data. Programming routines were created so as to enable the use of the time series of the forces present at the risers and mooring lines as input data for
Publicado em: 2007
-
6. RESISTÊNCIA À TRAÇÃO DE UM SISTEMA DE ANCORAGEM EMBUTIDO EM CONCRETO SUJEITO A CARGA DE IMPACTO / TENSILE STRENGTH OF A CONCRETE ANCHORING SUBJECTED TO IMPACT LOAD
This work investigates the strength of a concrete anchor system constituted of headed studs embedded in concrete subjected to impact tension load. The main variable was the loading rate which varied from a minimum of 0,015 kN/s (static) to a maximum of 54885 kN/s. The anchor system was designed so that the failure was governed by concrete cone breakout. Elev
Publicado em: 2006
-
7. FRACTURE RESISTENCE OF THE GRADE R4 STRUCTURAL STEEL AND ITS DEPENDENCE WITH THE QUENCHING TEMPERATURE / RESISTÊNCIA À FRATURA DO AÇO ESTRUTURAL R4 E SUA DEPENDÊNCIA COM A TEMPERATURA DE TÊMPERA
O presente trabalho apresenta um estudo da influência dos tratamentos térmicos de têmpera e revenido sôbre a resistência à fratura do aço estrutural R4, adotado na fabricação de elos para sistemas de ancoragem de unidade offshore e soldados pelo processo de centelhamento. Corpos de prova do tipo CT foram retirados da região da solda dos elos, usina
Publicado em: 2005
-
8. FATIGUE LIFE IMPROVEMENT OF THE R4 STUCTURAL STEEL / OTIMIZAÇÃO DA VIDA-FADIGA DO AÇO ESTRUTURAL R4
Esta pesquisa teve como objetivo avaliar o efeito do jateamento de partículas (shot-peening) sobre a vida-fadiga do aço estrutural R4, largamente adotado na fabricação de componentes estruturais para sistemas de ancoragem de unidades flutuantes. Inicialmente, amostras cilíndricas do material foram retiradas das seções retas de elos tipo Kenter. Em seq
Publicado em: 2005
-
9. INFLUÊNCIA DA FRAÇÃO DE MARTENSITA REVENIDA NA VIDA EM FADIGA DE UM AÇO ESTRUTURAL COM APLICAÇÕES EM SISTEMAS DE ANCORAGEM / INFLUENCE OF TEMPERED MARTENSITE ON THE FATIGUE LIFE OF STRUCTURAL STEEL FOR MOORING SYSTEMS
The great explor atory potential in deep waters has led companies in the oil sector to search for the necessary technological improvement to make the offshore exploration and production feasible. In parallel to searching for new technologies, the reduction in risks of structural failure has become the sector`s constant practice, considering that such failure
Publicado em: 2002