Nominal Power
Mostrando 1-12 de 64 artigos, teses e dissertações.
-
1. ENERGETIC ANALYSIS OF AN ABSORPTION CHILLER USING NH3/LiNO3 AS AN ALTERNATIVE WORKING FLUID
Abstract This paper presents a thermodynamic model developed for a prototype absorption chiller using NH3/LiNO3 with 10 kW of nominal capacity. The study was undertaken using thermodynamic modeling based on the mass and energy balance, takes the overall heat transfer coefficients into consideration and uses the characteristic equation method. First, the resu
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
2. Rheological characteristics PBAT/organoclay compounds
Abstract The rheological behavior of poly (butylene adipate-co-terephthalate) (PBAT) and its composites prepared with three different organoclays was investigated. Composites containing up to 7.5%, w/w organoclay, were prepared by two routes: (a) direct melt blending in an internal laboratory mixer with high intensity rotors and (b) concentrates (prepared in
REM, Int. Eng. J.. Publicado em: 2019-06
-
3. A new approach for Y-TZP surface treatment: evaluations of roughness and bond strength to resin cemen
Abstract Objective This study aims to evaluate the effect of sonochemical treatment on the surface of yttria-stabilized tetragonal zirconia (Y-TZP) before and after the final sintering. Material and Methods Twenty-eight Y-TZP discs were divided into four groups (n=7), according to surface treatment: PRE: pre-sintering sonication with 30% nominal power fo
J. Appl. Oral Sci.. Publicado em: 11/04/2019
-
4. Simplified Methodology for Temperature Calculation of Operation and Photovoltaic Modules Yield in Non-Standardized Environmental Conditions
ABSTRACT This work proposes a simplified methodology to obtain the needed data to determine and investigate the variation of photovoltaic modules performance under non-standardized environmental conditions - Standard Test Conditions and Nominal Operating Cell Temperature. This methodology uses a previously developed mathematical model in association with env
Braz. arch. biol. technol.. Publicado em: 22/10/2018
-
5. Determination of acoustic fields in acidic suspensions of peanut shell during pretreatment with high-intensity ultrasound
Abstract The benefits of high-intensity ultrasound in diverse processes have stimulated many studies based on biomass pretreatment. In order to improve processes involving ultrasound, a calorimetric method has been widely used to measure the real power absorbed by the material as well as the cavitation effects. Peanut shells, a byproduct of peanut processing
Braz. J. Chem. Eng.. Publicado em: 2017-04
-
6. Evaluation of gloves as a water bag coupling agent for therapeutic ultrasound
Abstract Introduction Therapeutic ultrasound (TUS) is a widespread modality in physiotherapy, and the water bag technique is a coupling method employed in the presence of anatomical irregularities in the treatment area. The aim of the present study is to evaluate the acoustic attenuation of the water bag and its effectiveness as a TUS coupling agent. Metho
Res. Biomed. Eng.. Publicado em: 27/03/2017
-
7. Energy evaluation of an evaporative cooling system using water driven ejector
The search for efficient and accessible cooling systems has increased worldwide. This study aims to build and evaluate an evaporative cooling system using a water driven ejector, allowing it to be installed in places with plenty of water. The system was investigated varying the flow rate and temperature of the circulating water, temperature of the replacemen
Food Sci. Technol. Publicado em: 20/06/2014
-
8. Teste de Mann-Kendall modificado: desempenho de três abordagens de correção da variância
O teste de Mann-Kendall (MK) vem sendo largamente utilizado para detectar tendências climáticas em diversas partes do globo. Três adaptações têm sido propostas (MKD, MKDD e MKRD) para remover a influência da correlação serial sobre o MK. O objetivo deste trabalho foi avaliar a probabilidade de ocorrência dos erros tipos I e II associada a essas tr�
Bragantia. Publicado em: 17/12/2013
-
9. Demanda de potência do motor hidráulico do extrator primário da colhedora de cana-de-açúcar / Power demand in the hydraulic motor of primary extractor of the sugar cane harvester
The growing demand of sugar cane and the need for agility in the processing of this product, the agricultural sector led to seek cropping systems with greater capacity in the field. However, the sugar cane harvesters still have some critical points depending on the quality of work due to various types of product losses during harvest. Most of the deficiencie
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
10. O comportamento dos custos de produção do café arábica em relação a venda de máquinas agrícolas no estado de Minas Gerais
Brazil stands out on the world stage with regard to the marketing of agricultural products, ranking third in the world rankings when it comes to exports, according to the World Trade Organization - WTO (2011). The agricultural sector is the second-level employment in the country, according to the Brazilian Institute publishes Economic Geography - IBGE (2011)
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/04/2012
-
11. ANALISE E PROJETO DO CONVERSOR BUCK INTERCALADO PARA ALIMENTAÇÃO DE LÂMPADAS DE DESCARGA EM ALTA PRESSÃO DE ALTA POTÊNCIA / INTERLEAVED BUCK CONVERTER ANALYSIS FOR HIGH POWER HIGH INTENSITY DISCHARGE LAMPS SUPPLYING
This work presents a detailed analysis about the interleaved buck converter applied to electronic ballasts to supply high power HID lamps, assuming the input voltage as a PFC stage output. As the output capacitor has a maximum value to be applied in parallel with the lamp, parallel operated converters are a suitable choice because the output current ripple c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
12. Performance of single wire earth return transformers with amorphous alloy core in a rural electric energy distribution system
In this paper are presented some considerations about the performance of single wire earth return amorphous alloy core transformers in comparison with conventional silicon steel sheets cores transformers used in rural electric energy distribution network. It has been recognized that amorphous metal core transformers improve electrical power distribution effi
Mat. Res.. Publicado em: 08/05/2012