Non Ferrous Materials
Mostrando 1-5 de 5 artigos, teses e dissertações.
-
1. Experimental Magnetometer Calibration for Nanosatellites’ Navigation System
ABSTRACT This article deals with the problem of Earth’s magnetic field sensors calibration in the context of low-cost nanosatellites’ navigation systems. The attitude of space vehicles can be determined from the state estimation using information from three-axis inertial and non-inertial sensors. This study considers a three-axis solid-state magnetometer
J. Aerosp. Technol. Manag.. Publicado em: 2016-03
-
2. Estudo da microestrutura, da textura cristalográfica e da recristalização em chapas obtidas por lingotamento contínuo e semicontínuo da liga de alumínio AA4006. / A study of the microstructure, crystallographic texture, and recrystallization in AA4006 alloy strips produced by twin roll caster and direct chill processes.
A liga de alumínio designada AA4006 é muito utilizada na indústria. É uma liga do sistema Al-Fe-Si, com teores (% em massa) de Si na faixa de 0,8 a 1,2% e Fe entre 0,5 e 0,8%. Apesar de ser bastante utilizada, ela foi pouco estudada. Neste trabalho foi realizado um estudo comparativo da microestrutura e da textura cristalográfica entre chapas da liga AA
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
3. DESENVOLVIMENTO DE METODOLOGIA PARA AVALIAÇÃO DA TENDÊNCIA À REOXIDAÇÃO DE PELOTAS DE MINÉRIO DE FERRO REDUZIDAS EM PROCESSO DE REDUÇÃO DIRETA A GÁS / DESENVOLVIMENTO DE METODOLOGIA PARA AVALIAÇÃO DA TENDÊNCIA À REOXIDAÇÃO DE PELOTAS DE MINÉRIO DE FERRO REDUZIDAS EM PROCESSO DE REDUÇÃO DIRETA A GÁS
Among the alternative processes for reducing iron oxide to produce iron and steel, the most currently used is the Midrex technology. The product may be the sponge iron, also called DRI (Direct Reduced Iron), composed mainly of metallic iron and iron oxide, or HBI which is the DRI pressed in the form of briquettes. DRI has a tendency to reoxidation in air, es
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/11/2010
-
4. Production of a low young modulus titanium alloy by powder metallurgy
Titanium alloys have several advantages over ferrous and non-ferrous metallic materials, such as high strengthto-weight ratio and excellent corrosion resistance. A blended elemental titanium powder metallurgy process has been developed to offer low cost commercial products. The process employs hydride-dehydride (HDH) powders as raw material. In this work, re
Materials Research. Publicado em: 2005-12
-
5. STUDY OF THE USE OF MAGNETITE AS ADSORBER OF Cu2+., Pb2+., Ni2+ AND Cd2+ IN AQUEOUS SOLUTION. / Estudo da Utilização de Magnetita como Material Adsorvedor dos Metais Cu2+ , Pb2+ , Ni2+ e Cd2+ , em Solução.
Various references on the use of ferrous compounds as non - conventional adsorption materials can be found in literature. According to the literature, such materials as hematite, galvanic slag and blast furnace slag were successfully used in liquid waste treatment for heavy metals removal. Thus, the use of abundant ferrous metallurgy slag may prove to be eff
Publicado em: 2000