O W Emulsions
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Droplet Size Distribution in Water-Crude Oil Emulsions by Low-Field NMR
This paper reports the droplet size distribution (DSD) measurements in 28 W/O (water/oil) crude oil emulsions prepared with two Brazilian oils (medium and heavy) under different shear conditions using both 10 g L-1 NaCl solution and water production by low field nuclear magnetic resonance (NMR, 2.2 MHz). The PFGSTE (pulsed-field gradient-stimulated echo) pul
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
2. Vegetable moisturizing raw material from “Caatinga” Brazilian biome: safety and efficacy evaluations of O/W cosmetic emulsions containing Kalanchoe brasiliensis extract
The purpose of this study was to evaluate the safety of Kalanchoe brasiliensis extract, followed by the development of an oil in water emulsion containing the K. brasiliensis leaves extract and evaluating its clinical moisturizing efficacy. The formulations containing sodium acrylates/ Beheneth-25 methacrylate Crosspolymer (and) hydrogenated polydecene (and)
Braz. J. Pharm. Sci.. Publicado em: 08/04/2019
-
3. Correlation between rheological properties and capillary fixation for modelling creams
The Brazilian male beauty market occupies the second place in world consumption of cosmetics. Among the numerous products consumed by such audience is the capillary fixation mask, which is mainly composed by fixatives. These additives act on stabilizing the cosmetic emulsion, protecting the hair against moisture and also increasing the intensity of hair fixa
Braz. J. Pharm. Sci.. Publicado em: 29/11/2018
-
4. CHEMICAL DEMULSIFICATION OF MODEL WATER-IN-OIL EMULSIONS WITH LOW WATER CONTENT BY MEANS OF IONIC LIQUIDS
Abstract The demulsification of model water-in-oil (w/o) emulsions containing 1% wt. water by [Omim][PF6] and Aliquat® 336 ionic liquids (IL) as demulsifiers was investigated in batch mode at different temperatures (30, 45 and 60 °C) and demulsifier concentrations (2.5×10‒3, 1.2×10‒2 and 2.9×10‒2 mol L‒1). The model oil is a mixture n-heptane/to
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
5. The Lubricity Analysis of Cutting Fluid Emulsions
The new generation of cutting fluids should have some characteristics, such as low toxicity and biodegradability. A bio-cutting fluid emulsion are an excellent option because they present those properties, as well as good mechanical performance. The present study aims to investigate the lubricity of O/W emulsions (cutting fluid emulsion), varying the concent
Mat. Res.. Publicado em: 2017
-
6. Developing novel one-step processes for obtaining food-grade O/W emulsions from pressurized fluid extracts: processes description, state of the art and perspectives
Abstract In this work, a novel on-line process for production of food-grade emulsions containing oily extracts, i.e. oil-in-water (O/W) emulsions, in only one step is presented. This process has been called ESFE, Emulsions from Supercritical Fluid Extraction. With this process, emulsions containing supercritical fluid extracts can be obtained directly from p
Food Sci. Technol. Publicado em: 27/10/2015
-
7. EFFECT OF WATER CONTENT, TEMPERATURE AND AVERAGE DROPLET SIZE ON THE SETTLING VELOCITY OF WATER-IN-OIL EMULSIONS
AbstractWater-in-oil (W/O) emulsions are complex mixtures generally found in crude oil production in reservoirs and processing equipment. Sedimentation studies of water-oil emulsions enable the analysis of the fluid dynamic behavior concerning separation of this system composed of two immiscible liquids. Gravitational settling was evaluated in this article f
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
8. OPTIMIZATION OF THE OPERATING CONDITIONS FOR RHAMNOLIPID PRODUCTION USING SLAUGHTERHOUSE-GENERATED INDUSTRIAL FLOAT AS SUBSTRATE
AbstractBiosurfactants have a wide range of applications in emulsions, separations, and solubilization because these chemicals reduce the surface tension and viscosity of solutions. This work studied rhamnolipid production using a batch bioreactor with a working volume of 1.5 liters, Pseudomonas aeruginosa ATCC (American Type Culture Collection) 10145 strain
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
9. INTERFACIAL ENERGY DURING THE EMULSIFICATION OF WATER-IN-HEAVY CRUDE OIL EMULSIONS
Abstract The aim of this study was to investigate the interfacial energy involved in the production of water-in-oil (W/O) emulsions composed of water and a Brazilian heavy crude oil. For such purpose an experimental set-up was developed to measure the different energy terms involved in the emulsification process. W/O emulsions containing different water volu
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
10. Effects of direct and alternating current on the treatment of oily water in an electroflocculation process
In the direct current mode (DC), widely used in electroflocculation (EC), the formation of an impermeable oxide layer on the cathode causes the declining of the efficiency of this process. This disadvantage has been reduced by adopting alternating current (AC). In this study, the effects of AC and DC on operational parameters such as the removal of oils and
Braz. J. Chem. Eng.. Publicado em: 2014-09
-
11. Development of O/W emulsions containing Euterpe oleracea extract and evaluation of photoprotective efficacy
Euterpe oleracea Mart. é uma palmeira popularmente conhecida como açaí, encontrada no norte do Brasil. O fruto do açaí apresenta em sua composição antocianinas, uma classe de polifenóis à qual é atribuída propriedade antioxidante. Os objetivos desse trabalho foram desenvolver emulsões fotoprotetoras O/A contendo extrato glicólico de açaí (AGE)
Braz. J. Pharm. Sci.. Publicado em: 2014-09
-
12. Production and characterization of surface-active compounds from Gordonia amicalis
Two methods were used to make crude preparations of surface-active compounds (SACs) produced by Gordonia amicalis grown on the medium containing 1% diesel oil. Using a 2:1 (v/v) solution of chloroform:methanol for extraction, Type I SACs were isolated and shown to produce oil in water (O/W) emulsions. Type II SACs were isolated by precipitation with ammonium
Braz. arch. biol. technol.. Publicado em: 2014-02