Parts
Mostrando 1-12 de 5288 artigos, teses e dissertações.
-
1. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
2. Cadaveric study of anatomical measurement of isthmus parameters of lumbar spine to guide cortical bone screw placement
SUMMARY OBJECTIVE: To reduce surgical exposure and improve accuracy, this study evaluated the anatomical distance parameter D (including D1, D2, and D3) of the lumbar isthmus for cortical bone screw insertion. METHODS: A total of 25 structurally complete lumbar dry specimens were used for lumbar anatomy measurements. The six cadaver specimens were divided
Revista da Associação Médica Brasileira. Publicado em: 2022
-
3. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
4. Nitrogen Oxides Levels in the Atmosphere of Different Brazilian Urban Centers, by Passive Sampling
Urban air pollution is still an emerging environmental problem, it causes damage to health and is difficult to be controlled in urban centers. The population of large metropolises is often exposed to concentrations of nitrogen oxides (NOx), mainly due to vehicle emissions. Epidemiological studies claim that exposure to these oxides is strongly correlated wit
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Design, development, and implementation of 3D-printed polylactic acid centrifuge rotors for laboratory-scale applications
In this work, self-made laboratory centrifuge equipment was developed for the separation of suspensions and immiscible liquids. This centrifuge was based on the Arduino microcontroller and fabricated from simple and recycled mechanical and electronic parts, spending an inexpensive budget suitably. The centrifuge frame and rotors were manufactured of Polylact
Química Nova. Publicado em: 2022
-
6. Proposal of a failure envelope for artificially cemented sand
Abstract Soils are particulate materials, which often stand out for their low shear strength. In most cases, this aspect justifies adapting the geotechnical project for this characteristic, which can be even more problematic in the case of soft sands, since it often occurs in superficial layers in various parts of the metropolitan region of Fortaleza. Theref
REM - International Engineering Journal. Publicado em: 2022
-
7. DESENVOLVIMENTO DE ACESSÓRIO PORTÁTIL DE CONTROLE DE TEMPERATURA PARA MEDIDAS ESPECTROSCÓPICAS
Temperature is a natural phenomenon that may modify the structure of chemical compounds and hence their properties. We aimed to develop a simple portable system based on the Peltier principle for spectral characterization of compounds with temperature-dependent structure. The device was constructed and adapted to three pieces of equipment: X-ray diffractomet
Química Nova. Publicado em: 2022
-
8. Development and Validation of a Rapid and Reliable HPLC-FLD Method for the Quantification of Ciprofloxacin and Enrofloxacin Residues in Zea mays
The accumulation of antibiotics by plants is a currently concern associated to yield reduction and transference of antibiotic residues along the food web. Maize is a staple food in many parts of the world; it is also considered an important ingredient in animal nutrition. Considering the lack of validated analytical methods for the analysis of ciprofloxacin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
10. SYNTHESIS OF TOLUENE DIISOCYANATE URETHANE PREPOLYMER USING CASTOR OIL AND EVALUATION OF MECHANICAL PROPERTIES
This research is the synthesis of urethane prepolymer cast elastomer which had been produced using toluene diisocyanate and castor oil to replace the synthetic polyol, from petroleum origin, and the evaluation of mechanical properties of the polyurethane. The focus was to replace polyol from petroleum to vegetable material looking for renewable resources. Th
Química Nova. Publicado em: 2022
-
11. Physical-chemical characterization, bioactive compounds, and antioxidant activity of pulp and peel of the Jamelão
ABSTRACT The high production of jamelão (Syzygium cumini) during harvest and the lack of information about it emphasize the development of new processing technologies for this fruit since it has been proven that its different parts have functional properties. The objectives of this work were to evaluate the physical-chemical characteristics and to determine
Revista Ceres. Publicado em: 2022
-
12. METABOLIC PROFILING AND CYTOTOXIC ACTIVITY OF METHANOL EXTRACTS FROM CHAMAECRISTA DUCKEANA (P. BEZERRA & A. FERN.) H. S. IRWIN & BARNEBY (LEGUMINOSAE, CAESALPINIOIDEAE)
The genus Chamaecrista comprises more than 330 species, with only a few studies on their chemical composition and biologic activities. In this study, the phytochemical profile of leaf, stems, and fruits extracts of the C. duckeana were examined by UPLC ESI HRMS analysis to determine possibly bioactive constituents. The antioxidant activity was carried out th
Química Nova. Publicado em: 2022