Performance In The Work In Process
Mostrando 1-12 de 1214 artigos, teses e dissertações.
-
1. Catalysts Derived from Thermal Treatments of Hydrocalumite-Type Compounds: Synthesis and Application in Transesterification Reactions
Catalyst performance is a relevant factor in biodiesel production because it can affect the efficiency of the process. This work provides a study of the performance of heterogeneous catalysts for biodiesel production derived from thermal-treated hydrocalumite-type compounds. This work aimed to synthesize and characterize hydrocalumite-type compounds intercal
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
2. Effect of Multi-Pass Rolling on the Performance of AZ31 Magnesium Alloy Anode in Mg-Air Battery
In this work, the influence of rolling passes on microstructure, corrosion behavior, electrochemical performance, and battery performance of AZ31 magnesium alloy was studied. The experimental results show that the grain size decreases first and then increases with rolling passes. Among them, the grain size of three passes rolled sample is the smallest, while
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Hybrid MAPbI3 Perovskite Growth Mechanism from Irregular Particles to Cuboid and Hopper-Type Morphologies
Methylammonium lead iodide (MAPbI3), used as light-harvesting layer in solar cell devices, has attracted great attention from scientific community due to its excellent photovoltaic performance. In this work, we have shown a comprehensive study on the hybrid organic-inorganic MAPbI3 perovskite growth mechanism from irregular small particles to cuboid shape fo
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
5. Design, development, and implementation of 3D-printed polylactic acid centrifuge rotors for laboratory-scale applications
In this work, self-made laboratory centrifuge equipment was developed for the separation of suspensions and immiscible liquids. This centrifuge was based on the Arduino microcontroller and fabricated from simple and recycled mechanical and electronic parts, spending an inexpensive budget suitably. The centrifuge frame and rotors were manufactured of Polylact
Química Nova. Publicado em: 2022
-
6. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
7. Fuzzy Boundary for Beams Vibrations in Vehicles
ABSTRACT This work aims to study the transversal motion of a car’s chassis, modeled by a beam and supported at its ends by two sets of spring-damper elements. A finite differences method is utilized along with Robin boundary conditions to solve the mathematical modeling. The constants of the boundary conditions are modeled by a fuzzy parameter obtained thr
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
8. Acid matrix production from treated natural vermiculite-hydrobiotite
Abstract Given the potential of acid-activated clays in adsorptive and catalytic processes, several studies focusing on acid matrices have grown over the years, making it possible to study vermiculite, a mineral composed of a type 2:1 unit cell with tetrahedral and octahedral sheets. Therefore, this work aimed to study vermiculite treated with acids for the
Cerâmica. Publicado em: 2021-06
-
9. PERFORMANCE OF AIR INDUCTION SPRAY NOZZLE MODELS UNDER DIFFERENT OPERATING CONDITIONS
ABSTRACT For the successful application of phytosanitary products, it is essential to understand the spraying process well. The present work aims to evaluate the spectrum and speed of the droplets produced by different spray nozzle models with air induction, working under different operating conditions. The experiment was conducted using an entirely randomiz
Eng. Agríc.. Publicado em: 2020-12
-
10. Performance of Water Oxidation by 3D Printed Electrodes Modified by Prussian Blue Analogues
The water oxidation is the limiting step in the water-splitting process. Given this scenario, the development of new catalysts is essential in this field. The emergent demand is the use of Earth-abundant elements and catalysts with high performance under mild conditions. Because of this, catalysts such as Prussian Blue analogues (PBA) have been receiving a l
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
11. VALIDATION OF ANALYTICAL METHODS IN A PHARMACEUTICAL QUALITY SYSTEM: AN OVERVIEW FOCUSED ON HPLC METHODS
Analytical validation has fundamental importance in the scope of Good Manufacturing Practice (GMP) for pharmaceutical products since it establishes scientific evidence that an analytical procedure provides reliable results. However, even with validation guidelines available it is very common to observe misunderstandings in the execution of validation and dat
Quím. Nova. Publicado em: 2020-09
-
12. Effects of Temperature and Concentration on the Determination of PET Viscosity
This work describes the use of experiment planning to investigate the effects of the variables temperature and concentration of the polymer solution on the viscosity test of polyethylene terephthalate (PET). For this, the response surface methodology was based on a central composite rotatable design (CCRD) to optimize the combinations of the analytical condi
J. Braz. Chem. Soc.. Publicado em: 2020-09