Performance Optimization
Mostrando 1-12 de 525 artigos, teses e dissertações.
-
1. Efficient Low-Complexity Optimized Channel Estimating Methods for OFDM-Based Low-Voltage Broadband Power Line Communication Systems
Abstract Broadband Power Line Communication (BB-PLC) technology enables data transmission for smart grid applications. Nevertheless, channel equalizers are required in the receiver to estimate and compensate for the nonlinear time-variant impulse response and noise interference effects introduced by the BB-PLC channel. In this paper, we append the Particle S
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Unplanned dilution back analysis in an underground mine using numerical models
Abstract In underground mines, stability problems can cause unplanned dilution, increasing the costs of mining operations, such as loading, transport, crushing and grinding. This is usually dealt with by simply increasing investments with support. However, the design geometry of stopes and drifts also has a great effect on a stope’s stability. The use of e
REM - International Engineering Journal. Publicado em: 2022
-
3. A Novel In Silico Monte Carlo Approach to Optimize a PSD Estimation Problem. Generation of Data Fusion Experiment Rules
ABSTRACT This article analyzes the performance of combining information from Scanning Electron Microscopy (SEM) micrographs with Static Light Scattering (SLS) measurements for retrieving the so-called Particle Size Distribution (PSD) in terms of experimental features. The corresponding data fusion is implemented using a novel Monte Carlo-based method consist
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
4. Design and Performance Study of Single and Multi-Layered Fractal Based Miniaturized Patch Antennas for 2.4 GHz Applications
Abstract The design and characterization of single and multi-layered miniaturized microstrip antennas resonating at 2.4 GHz are proposed. The miniaturization is accomplished by fractal Defected Ground Structure (DGS). The DGS used for miniaturization is a Modified Minkowski Fractal DGS (M-MFDGS). The proposed size reduction process with M-MFDGS follows the s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
5. STUDY ON THE OPTIMIZATION FOR THE SIZE OF FUEL CELL FLOW FIELD UNDER INADEQUATE AIR SUPPLY CONDITION
In this paper, the influence of the optimization for flow field size on the proton exchange membrane fuel cell (PEMFC) performance under the inadequate air supply of cathode was studied based on the three-dimensional, steady-state, and constant temperature PEMFC monomer model. Additionally, the effect of the optimization for hybrid factors, including length,
Quím. Nova. Publicado em: 2021-04
-
6. Optimization of Methodology for Determination of Inorganic Chromium Species in Sewage Sludge Samples by HPLC-ICP-MS/MS
This study developed a methodology for extracting and speciating CrIII and CrVI in sewage sludge by high performance liquid chromatography, inductively coupled plasma tandem mass spectrometry (HPLC-ICP-MS/MS). The optimal procedure was solid-liquid extraction in a water bath with stirring at 50 °C for 16 h and 50 mmol L−1 ethylenediaminetetraacetic acid (
J. Braz. Chem. Soc.. Publicado em: 2020-12
-
7. Optimization and Validation of LLE-LTP and QuEChERS Methodologies for Determining 2,4-D in Water Samples
2,4-Dichlorophenoxyacetic acid (2,4-D) has been one of the main herbicides used to control weeds, however, due to its high use it can promote episodes of environmental contamination. Therefore, this study aimed to optimize and validate the liquid-liquid extraction with low-temperature partition (LLE-LTP) and the quick, easy, cheap, effective, rugged, and saf
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
8. Optimization and release evaluation for tea polyphenols and chitosan composite films with regulation of glycerol and Tween
Abstract In order to optimize the performance of chitosan-tea polyphenols composite films, effects of glycerol and Tween on the antioxidative activities and physical performance of chitosan composite films were evaluated. The results indicated that both flexibility and water vapour permeability of chitosan/tea polyphenols films were improved with the additio
Food Sci. Technol. Publicado em: 2020-03
-
9. Analysis and Optimization of Ultra-Low-Power Rectifier with High Efficiency for Applications in Wireless Power Transmission and Energy Harvesting
Abstract The system capable of harvesting RF energy from the environment through an antenna and converting it into direct current energy to deliver to a load is known as rectenna. The rectifier circuit is an important part of the rectenna and its modeling is arduous since it employs a non-linear device working at extremely low power levels. In addition, ther
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
10. Flexible, Large-Area Organic Solar Cells With Improved Performance Through Incorporation of CoFe2O4 Nanoparticles in the Active Layer
Cobalt ferrite (CoFe2O4) nanoparticles (NPs), with an average diameter of about 4-10 nm, were produced by the proteic sol-gel method and successfully doped into the active layer of poly(3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) organic solar cells. Pristine and CoFe2O4 NPs-doped blends of P3HT:PCBM were dispersed in
Mat. Res.. Publicado em: 13/01/2020
-
11. Optimized dimensioning of steel-concrete composite beams
Resumo As seções mistas de aço e concreto estão cada vez mais sendo utilizadas na construção civil, tanto no cenário mundial quanto no Brasil. O trabalho conjunto do perfil de aço e da laje de concreto aumenta consideravelmente o desempenho do elemento estrutural misto devido ao aproveitamento das vantagens de cada material. Neste trabalho, é utiliz
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
12. A METHODOLOGY TO OBTAIN ANALYTICAL MODELS THAT REDUCE THE COMPUTATIONAL COMPLEXITY FACED IN REAL TIME IMPLEMENTATION OF NMPC CONTROLLERS
Abstract Model Predictive Control, MPC and NMPC, and real-time optimization, RTO and D-RTO, are known to help plant operability through the mitigation of impacts caused by external disturbances. However, the usage of these tools in industry requires overcoming some challenges, for instance: accurate models of the process, particularly in regard to nonlineari
Braz. J. Chem. Eng.. Publicado em: 09/12/2019