Phases Diagrams
Mostrando 1-12 de 59 artigos, teses e dissertações.
-
1. Simulação termodinâmica computacional de liga modelo de aço super ferrítico contendo 0,07% de boro
RESUMO Aços inoxidáveis super ferríticos são utilizados em equipamentos como trocadores de calor e torres de destilação que operam em condições extremas de temperatura, pressão e em ambientes contendo altas concentrações de cloretos, H2S e CO2, encontradas nas novas áreas de exploração de petróleo e gás na costa brasileira. Uma liga super fer
Matéria (Rio J.). Publicado em: 20/05/2019
-
2. Efecto de la sustitución de V por Ti sobre las temperaturas de transformación de fase y el desajuste de red matriz/precipitado en la superaleación 76Fe-12Al-12V
ABSTRACT Fe-Al based alloys have a remarkable potential for high temperature structural applications, provided that the limitation of their low creep resistance is solved. Third element addition (Nb, Ti, Zr or Ta) has proven to per-form the task, at the expense of a low ductility. In previous works we have investigated ferritic alloys in the Fe-Al-V system w
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. MgO Saturation Analisys of CaO-SiO2-FeO-MgO-Al2O3 Slag System
Electric arc furnace (EAF) slag has a range of functions, including improving energy efficiency through the "slag foaming" phenomenon. As such, the study of slag is important in EAFs. One of the factors that determine foaming quality and efficiency is the presence of solid particles. MgO saturation is highly significant since, in addition to ensuring the pre
Mat. Res.. Publicado em: 30/11/2017
-
4. Corrosion and microstructural characterization of martensitic stainless steels submitted to industrial thermal processes for use in surgical tools
INTRODUCTION: The mechanical properties and corrosion resistance of a material are dependent on its microstructure and can be modified by phase transformation. When a phase transformation occurs in a material it usually forms at least one new phase, with physical-chemical characteristics that differ from the original phase. Moreover, most phase transformatio
Rev. Bras. Eng. Bioméd.. Publicado em: 2014-09
-
5. Caracterización de cristales líquidos por microscopía óptica en sistemas surfactante polietoxilado-alcano-agua
The phase behavior of an alcohol polyethoxylated surfactant with decane and dodecane oil phase varying the water proportion from 5 to 90% to determine compositions in which the formation of liquid crystals and microemulsions ocurred was investigated. Pseudoternary phase diagrams were built to represent the regions of liquid crystals, biphases and microemulsi
Quím. Nova. Publicado em: 2013
-
6. Microstructural characterization of as-cast hf-b alloys
An accurate knowledge of several metal-boron phase diagrams is important to evaluation of higher order systems such as metal-silicon-boron ternaries. The refinement and reassessment of phase diagram data is a continuous work, thus the reevaluation of metal-boron systems provides the possibility to confirm previous data from an investigation using higher puri
Materials Research. Publicado em: 14/02/2012
-
7. Modelagem da precipitação de MnS em aços elétricos de grão orientado
Grain oriented silicon steel has been used for electrical purposes since the beginning of the twentieth century. Their properties such as high permeability and resistivity reduce energy losses. The high permeability of these steels arises from a preferred orientation of grains in relation to the direction of rolling which leads to strong anisotropy of the ma
Publicado em: 2010
-
8. Remoção de sulfeto de hidrogênio, ferro e manganês de águas de abastecimento através dos processos de dessorção gasosa, nanofiltração e oxidação com permanganato de potássio
Many regions in Brazil have problems associated with the water quality of their supplies, which bring problems to the production of safe drinking water that is distributed in communities. Generally, consumers judge the drinking water safety through the use of their organoleptic senses. The conventional processes used in water treatment are not effective to r
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2010
-
9. Estudo de ComposiÃÃo e Estabilidade em EmulsÃes Formuladas a partir de Ãleos Lubrificantes Vegetais / Study of Composition and Stability in emulsions made from Vegetable Oil Lubricants
EmulsÃes a base de Ãleos lubrificantes vegetais foram preparadas com intuito de fornecer embasamento cientÃfico para futuras formulaÃÃes de fluidos de corte âemulsionÃveisâ. AtravÃs da construÃÃo de diagramas de fases e utilizando o conceito de BHL, fez-se a escolha do melhor sistema emulsionado, levando-se em consideraÃÃo os aspectos principais
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/12/2009
-
10. Desenvolvimento de sistemas líquido-cristalinos empregando silicone fluido de co-polímero glicol e poliéter funcional siloxano
For the construction of the phase diagrams, the method of the aqueous titration was used. There were prepared 5 ternary diagrams, varying the surfactant and the oil phase. The liquid-crystalline phases were identified by polarized light microscopy. The formulations prepared with silicon glycol copolymer, polyether functional siloxane (PFS) and water (S1) and
Química Nova. Publicado em: 2009
-
11. Equilíbrio líquido-líquido de sistemas aquosos constituídos por copolímero tribloco e sal em diferentes temperaturas / Liquid-liquid equilibrium of aqueous systems consisting of triblock copolymer and salt at different temperatures
Phases diagrams of aqueous biphasic systems (ABS) formed by triblock copolymer+salt+H2O were construed at three temperatures: The ABS L64+Na2SO4+H2O and L64+Li2SO4+H2O at 5, 10 and 25 C and ABS L35+Na2CO3+H2O, F68+Na3C6H5O7+H2O, F68+Na2C4H4O6+H2O, F68+Na2CO3+H2O and F68+Na2C4H4O4+H2O at 10, 25 and 40 C. The effect of temperature on the position of the binoda
Publicado em: 2009
-
12. Uma abordagem arquitetural para o desenvolvimento rigoroso de sistemas confiáveis baseados em componentes / A rigorous architectural approach to development component-based software systems
The incorporation of fault tolerance into systems normally increases their complexity, which consequently makes their analysis more difficult. Moreover, the use of exception handling mechanisms to develop robust software systems in a non-systematic manner can be a source of many design faults. This thesis presents a rigorous and architecture-centric developm
Publicado em: 2009