Physical Wear
Mostrando 1-12 de 53 artigos, teses e dissertações.
-
1. SPECIAL ARTICLE COVID-19: Safety for the Rhinologist in the Age of COVID-19: Mask Use, Nasal Corticosteroids, Saline Irrigation, and Endoscopic Procedures - Literature Review
Abstract Introduction Coronavirus disease 2019 (COVID-19) has claimed millions of lives. Adequate protection of the professionals involved in patient care is essential in the battle against this disease. However, there is much uncertainty involving safety-relarted topics that are of particular interest to the rhinologist in the context of COVID-19. Objecti
International Archives of Otorhinolaryngology. Publicado em: 2022
-
2. Heat treatment analysis of ASTM A106 steel spheroidization and erosive wear at high temperatures
Abstract The microstructures of steels are altered when exposed to high working temperatures for long periods, which results in varied physical and chemical proprieties. This study evaluates the erosive wear behavior of ASTM A106 steel after it is exposed to high temperatures for long durations. Samples of normalized ASTM A106GrB steel were placed in a muffl
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. Influence of the incorporation of triclosan methacrylate on the physical properties and antibacterial activity of resin composite
Abstract The incorporation of antimicrobials in the composites as an attempt to reduce bacterial adhesion without jeopardizing mechanical properties is a challenge for Dentistry. Objective: To evaluate the bacterial adhesion and physical properties of a composite containing the methacrylate triclosan- derivative monomer (TM). Methodology: TM was synthesize
J. Appl. Oral Sci.. Publicado em: 09/09/2019
-
4. Analysis of the densification of a composite obtained by sintering process of aluminum bronze powders with different carbides
Abstract Aluminum bronze alloy is applied in environments that require materials of high mechanical resistance and wear, such as marine, oil & gas and aerospace ones. This study analyzes the densification of composites based on aluminum bronze with additions of the vanadium (VC) and niobium (NbC) carbides, and the influence of these carbides in the milling e
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
5. A jornada exaustiva e a escravidão contemporânea
Resumo Este artigo discute o termo jornada exaustiva diante de dissensos jurídicos e administrativos em situações de trabalho análogo à escravidão. Defende-se que a jornada exaustiva é composta pela imbricação da intensidade e da extensividade do trabalho, aumentando as exigências de produtividade do trabalhador para se ajustar às demandas do capi
Cad. EBAPE.BR. Publicado em: 30/05/2019
-
6. An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718
ABSTRACT: This paper investigates the influences of three different input parameters, such as feed rate, insert nose radius, and insert coating methods, in the turning operation of Inconel 718. The coating methods were selected as medium temperature chemical vapor deposition (MT-CVD) and physical vapor deposition (PVD) and in addition to coating methods, the
J. Aerosp. Technol. Manag.. Publicado em: 25/02/2019
-
7. Dependence of Wear and Mechanical Behavior of Nitrocarburized/CrN/DLC Layer on Film Thickness
Diamond-like carbon (DLC) films are amorphous metastable carbon form that provide interesting mechanical and tribological properties. The role of film thickness influence upon wear and mechanical properties is of interest and not yet fully reported. In this study, two samples of previously plasma nitrocarburized, quenched and tempered H13 steel were duplex t
Mat. Res.. Publicado em: 31/01/2019
-
8. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Fatiga de contacto por rodadura en acero SAE 1050 recubierto con TiN, posteriormente templado
ABSTRACT The use of ceramic coatings of the nitride, carbide, or diamond type on steel substrates promotes the improvement of tribology properties. Nevertheless, high hardness gradients and adhesion problems may deteriorate the performance of these coatings when subjected to Rolling Contact Fatigue (RCF). Some studies on steels with ceramic coatings were car
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. On the Effect of Aluminum on the Microstructure and Mechanical Properties of CrN Coatings deposited by HiPIMS
Hard coatings are a suitable solution for increasing the lifetime of tools and components employed in different industrial applications. Coatings of transition metal nitrides have great use for tribological applications due to due to their unique mechanical properties. Although widely employed, current deposition methods such as cathodic arc evaporation prod
Mat. Res.. Publicado em: 12/04/2018
-
11. Cross-cultural adaptation and validation of the Impact of Fixed Appliances Measure questionnaire in Brazil
Abstract: The aim of this study was to translate and cross-culturally adapt the condition-specific instrument Impact of Fixed Appliances Measure (IFAM), assessing its validity and reliability for use among Brazilian children/adolescents. The IFAM was translated, back-translated, cross-culturally adapted, and pilot-tested. The Brazilian version of the IFAM (B
Braz. oral res.. Publicado em: 08/03/2018
-
12. Evaluation of scoliosis using baropodometer and artificial neural network
Abstract Introduction: One of the most recurrent pathologies in the spine is scoliosis. It occurs in the frontal plane and is formed by one or more curves in the spinal column. The scoliosis causes global postural misalignment in an individual. One of the modifications produced by postural misalignment is the way in which an individual distributes weight to
Res. Biomed. Eng.. Publicado em: 2017-06