Plasma Mixture
Mostrando 1-12 de 248 artigos, teses e dissertações.
-
1. Zika virus RNA detection in blood donors in São Paulo, Brazil
ABSTRACT Introduction: The Zika Virus (ZIKV) is a single-stranded RNA genome virus, belonging to the family Flaviviridae, genus Flavivirus. Outbreaks around the world have demonstrated that the presence of asymptomatic viremic blood donors provides an increase in the risk of transfusion transmission (TT) and nucleic acid test (NAT) screening has been propos
Hematology, Transfusion and Cell Therapy. Publicado em: 2022
-
2. Application of Mixture Design Using Diluted Acid for Extraction of Inorganic Components in Fruits of Casearia fasciculata and Determination by ICP OES: Evaluation by PCA and HCA
This study is the first to propose the simultaneous quantification of 10 elements in fruits of Casearia fasciculata by inductively coupled plasma optical emission spectrometry (ICP OES). A method of digestion using dilute nitric acid was optimized by mixture design for extraction of elements in the seed, peel, and pulp of Casearia fasciculata cultivated in t
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
3. Determinação de docetaxel e metabólitos em plasma por UPLC-MS/MS: desenvolvimento de metodologia analítica e aplicação clínica
A highly sensitive ultra-performance liquid chromatography tandem mass spectrometry method for the determination of Docetaxel and metabolites (M1+M3) in human plasma samples was developed and validated. The method employs a liquid-liquid extraction and a reversed phase separation Acquity® C18 column BEH C18 (150 x 2.1 mm, 1.7 µm). Mobile phase was a mixtur
Quím. Nova. Publicado em: 2020-04
-
4. The influence of nitrogen to hydrogen ratio and temperature on thickness and phase composition in plasma nitrided Ti-6Al-4V
ABSTRACT Ti-6Al-4V was plasma nitrided using several N2/H2 ratios and substrate temperatures. In order to investigate the combined influence of these parameters on phase composition and thickness of the coatings, the phases in the as received, annealed, and nitrided Ti-6Al-4V samples were identified with Rietveld refinement. In the as-received and annealed s
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Microstructure and Wear Resistance of ZrC-ZrB2 /Ni Composite Coatings Prepared by Plasma Transferred Arc Cladding
The ZrC-ZrB2/Ni metal matrix composite coatings were in-situ synthesized from a mixture of Ni, Zr and B4C by plasma transferred arc (PTA) cladding process. Microstructures and phase constituents of the coatings were characterized by electron probe micro-analyzer (EPMA) and X-ray diffraction (XRD). Microhardness and wear resistance of the coatings were system
Mat. Res.. Publicado em: 06/05/2019
-
6. Morphology of the DIN 100Cr6 Case Hardened Steel after Plasma Nitrocarburizing Process
Nitrocarburizing is considered one of the most important thermochemical treatments for surface modification of metallic materials and involves the simultaneous diffusion of nitrogen and carbon onto the surface. Understanding and controlling the formation of the nitrocarburized layer have considerable industrial interest due to the improvements regarding wear
Mat. Res.. Publicado em: 04/04/2019
-
7. Silicon Nanostructuring Using SF6/O2 Downstram Plasma Etching: Morphological, Optical and Sensing Properties
Silicon (Si) nanostructures were prepared in the downstream of radiofrequency SF6/O2 mixture plasma generated in 13.56 MHz hollow cathode discharge system. Depending on the oxygen percentage in the mixture, the obtained Si nanostructures were characterized for their different properties: etching rate, morphology, optical reflectance, photoluminescence, spect
Mat. Res.. Publicado em: 10/07/2018
-
8. Platelet-Rich Plasma in Reconstruction of Posterior Meatal Wall after Canal Wall Down Mastoidectomy
Abstract Introduction Canal wall down (CWD) mastoidectomy has many drawbacks, including chronic otorrhea not responding to medications, granulations, dizziness on exposure to cold or hot water, and tendency of debris accumulation in the mastoid cavity, demanding periodic cleaning. Many of these problems can be solved by reconstruction of the posterior meat
Int. Arch. Otorhinolaryngol.. Publicado em: 2018-06
-
9. BaltDC: purification, characterization and infrared spectroscopy of an antiplatelet DC protein isolated from Bothrops alternatus snake venom
Abstract Background: Snake venoms are a complex mixture of proteins, organic and inorganic compounds. Some of these proteins, enzymatic or non-enzymatic ones, are able to interact with platelet receptors, causing hemostatic disorders. The possible therapeutic potential of toxins with antiplatelet properties may arouse interest in the pharmacological areas.
J. Venom. Anim. Toxins incl. Trop. Dis. Publicado em: 08/02/2018
-
10. Effect of solvents on the morphology of PMMA films fabricated by spin-coating
Abstract A method to produce thin layer of PMMA (poly (methyl methacrylate) films by spin coating is reported. PMMA is dissolved in xylene, a mixture of MIBK-xylene and chloroform. Varying the PMMA concentration and spin-coating speeds controls the thickness of the PMMA films. Using chloroform as solvent evidenced thickness around 10 μm. This thickness is s
Polímeros. Publicado em: 21/09/2017
-
11. Wear resistance of AISI 304 stainless steel submitted to low temperature plasma carburizing
Abstract Despite the AISI 304 stainless steel has high corrosion/oxidation resistance, its tribological properties are poor, being one of the barriers for use in severe wear applications. Thus, there is a wide field for studying technologies that aim to increase the surface hardness and wear resistance of this material. In this work, hardness and wear resist
REM, Int. Eng. J.. Publicado em: 2017-09
-
12. Determination of Inorganic Contaminants in Electrical and Electronic Equipment after Digestion Using Microwave-Assisted Single Reaction Chamber
A method for digestion of plastics from waste of electrical and electronic equipment (WEEE) was developed using the microwave-assisted wet digestion in single reaction chamber (MAWD-SRC). The determination of As, Cd, Co, Cr, Cu, Ni, Pb, Sb and Zn by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrom
J. Braz. Chem. Soc.. Publicado em: 2017-09