Polyamide 6
Mostrando 1-12 de 66 artigos, teses e dissertações.
-
1. INCORPORAÇÃO DE RODAMINA B EM MEMBRANA DE POLIAMIDA PELO MÉTODO DA ADSORÇÃO
We have incorporated rhodamine into polyamide membranes by additive manufacture selective laser sintering technology. Incorporation into 0.5 cm2 membranes was conducted at different pH values and constant temperature of 25 oC. The amounts of incorporated dye were determined by a calibration curve, and analyses showed rhodamine incorporation in the order of 1
Quím. Nova. Publicado em: 2021-02
-
2. Temporal Evolution of Roughness Development on Polymer Surfaces Exposed to Non-Thermal Plasma
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
J. Braz. Chem. Soc.. Publicado em: 2020-10
-
3. COVID-19, Sistema Renina-Angiotensina, Enzima Conversora da Angiotensina 2 e Nicotina: Qual a Inter-Relação?
Processes such as ablation, erosion and corrosion generally create roughness patterns on solid surfaces. Despite the randomness of this phenomenon, some patterns can be described mathematically by studying statistically the mechanisms behind them. This paper reports an experimental study on the temporal evolution of the roughness development of polymer surfa
Arq. Bras. Cardiol.. Publicado em: 2020-10
-
4. Plasma Treatment of Polyamide Fabric Surface by Hybrid Corona-Dielectric Barrier Discharge: Material Characterization and Dyeing/Washing Processes
In this study, the hybrid corona-dielectric barrier discharge plasma treatment was employed to modify the physical, chemical and morphological characteristics of a half-knitted fabric composed of 92% polyamide 6.6 and 8% elastane (PA). These properties of the fabric were evaluated by the water contact angle, x-ray diffraction, infrared spectroscopy, scanning
Mat. Res.. Publicado em: 28/11/2019
-
5. PREPARATION AND CHARACTERIZATION OF THIN-FILM COMPOSITE REVERSE OSMOSIS MEMBRANE ON A NOVEL AMINOSILANE-MODIFIED POLYVINYL CHLORIDE SUPPORT
ABSTRACT Herein, the influence of pure and modified polyvinyl chloride (PVC) support layers on the performance of thin-film composite (TFC) membranes was investigated in water desalination. Accordingly, the PVC support was modified using (3-Aminopropyl) triethoxysilane (APTES) through bulk modification. The supports were synthesized at different doses of APT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
6. Properties of barrier shrink bags made with EVOH and polyamide for fresh beef meat preservation
Abstract The objective of this work was to compare the barrier and mechanical properties and shrinkability of coextruded films chlorine-free, with high barrier chlorine multilayer films traditionally used to preserve fresh beef. Four 9-layer barrier-shrink films containing PET, ethylene ionomers, polyamide PA66/6 modified with amorphous PA, 32 or 44 mol% EV
Polímeros. Publicado em: 21/05/2018
-
7. Coagulation Bath in The Production of Membranes of Nanocomposites Polyamide 6/Clay
Membranes of polyamide 6 and its nanocomposites with 3 and 5% of clay were obtained by the phase inversion method using distilled water and solvent as the coagulation bath, 10 and 30% of acid was used, in order to change the membranes morphology/porosity. By XRD analysis, the obtained nanocomposites showed an exfoliated and/or partially exfoliated structure,
Mat. Res.. Publicado em: 15/01/2018
-
8. Optical Properties of Blown Films of PA6/MMT Nanocomposites
In this work blown films of polyamide 6 (PA6) nanocomposites were produced at different processing conditions, with the addition of montmorillonite (MMT), pure and surface modified by an organic salt. The films' optical properties were evaluated according to ASTM D-1003 and the results correlated with the degree of crystallinity, nanoparticle's dispersion st
Mat. Res.. Publicado em: 23/10/2017
-
9. Physical, Chemical and Morphological Characterization of Polyamide Fabrics Treated with Plasma Discharge
In this work, physical, chemical and morphological modifications of three different polyamide 6.6 (PA6.6) fabrics were investigated using double barrier dielectric (DBD) plasma treatment. Several techniques of characterization were used to study the effects caused by the interaction between plasma discharge and polyamide fabrics, such as: contact angle, wate
Mat. Res.. Publicado em: 11/05/2017
-
10. Influência da temperatura de molde associada com o uso de fibra de vidro nas propriedades mecânicas e térmicas do nanocompósito (PA6/FV/MMT)
ABSTRACT This work describes the second of a series of studies of the effects of injection molding conditions on the mechanical and thermal properties of Polyamide 6/Glass Fiber/Montmorillonite (PA6/GF/MMT) composites and was motivated by the lack of information about how the processing variables influence on the properties of three-phase composites containi
Matéria (Rio J.). Publicado em: 11/05/2017
-
11. Hybrid Membranes of Polyamide Applied in Treatment of Waste Water
In this work, it was prepared hybrid membranes of polyamide6 (PA6) with montmorillonite (MMT) and porogenic agent (CaCl2). The hybrid membranes with CaCl2 were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), porosimetry by mercury intrusion
Mat. Res.. Publicado em: 16/01/2017
-
12. The aplication of cyanoacrilate surgical glue on skin suture in rats
Abstract Purpose: To compare the use of a new cyanoacrylate-based surgical glue and suture with sepa-rate points in skin wounds closure. Methods: Thirty-six rats were subjected to a 4cm dorsal longitudinal incision. Twelve were sub-jected to simple suture with polyamide 6-0, 12 rats underwent wall synthesis using Dermabond(r) and 12 was performed cutaneous
Acta Cir. Bras.. Publicado em: 2017-01