Polymer Light Emitting Diodes
Mostrando 1-12 de 14 artigos, teses e dissertações.
-
1. Electrical and optical numerical modeling of DP-PPV based polymer light emitting diode
Abstract In this paper, an in-depth study of the electrical and optical characteristics of Polymer Light Emitting Diodes ITO/PEDOT: PSS/DP-PPV derivatives/Al(Ca) is presented. Three polymer materials are considered; poly(2,3-diphenyl-5-(4-heptyloxy-4'-oxytrimethylenediphenyl)-phenylenevinylene) (P1), poly(2,3-diphenyl-5-[4-(4-pentylcyclohexyl)phenoxy]-propyl
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06
-
2. Montagem da técnica Photo-CELIV para obtenção de parâmetros de condução em filmes finos de polímeros eletrônicos / CELIV technique assembly for conduction parameters obtainment in electronic thin films polymers
A eletrônica orgânica, isto é, aquela baseada em compostos orgânicos principalmente por átomos de Carbono, Hidrogênio, Nitrogênio, etc., vem mostrado um notável desenvolvimento nos últimos anos, pois tem aberto novas aplicações e novos mercados na área da eletrônica. Displays flexíveis e de alta resolução feitos a partir de polímeros conjuga
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/05/2011
-
3. Effect of different light curing methods on mechanical and physical properties of resin-cements polymerized through ceramic discs
OBJECTIVE: The aim of this study was to compare the polimerization ability of three different light-curing units (quartz tungsten halogen, light-emitting diodes and plasma arc) and their exposure modes (high-intensity and soft-start) by determination of microhardness, water sorption and solubility, and diametral tensile strength of 5 dual-curing resin cement
J. Appl. Oral Sci.. Publicado em: 01/07/2011
-
4. Effect of different light-curing devices and aging procedures on composite knoop microhardness
The aim of this study was to evaluate the effect of light-curing devices (Halogen/HAL, Light Emitting Diodes/LED, Argon Laser/LAS and Plasma Arc/PAC) and aging procedures (Mechanical Cycling/MC, Thermal Cycling/TC, Storage/S, MC+TC and MC+TC+S) on the micro-hardness of bottom/B and top/T surfaces of 2-mm-high composite resin cylinders. The Knoop microhardnes
Brazilian Oral Research. Publicado em: 2009-12
-
5. Light emitting copolymers containing groups fluorene and quinoline: preparation, characterization and assembly of leds. / Copolímeros emissores de luz contendo grupos fluoreno e quinolina: preparação, caracterização e montagem de LEDs.
Visando o crescente interesse em pesquisa de novos materiais para a fabricação de dispositivos eletrônicos a base de polímeros semicondutores, com elevado potencial para a fabricação de diodos emissores de luz poliméricos os (PLEDs - Polymer light-emitting diodes), este presente trabalho teve como objetivo a síntese de novos copolímeros através da
Publicado em: 2009
-
6. Influence of intensive light exposure on the complex impedance of polymer light-emitting diodes
In this work we investigated the effect of visible radiation on the electrical properties of poly[(2-methoxy-5-hexyloxy)-p-phenylenevinylene]- MH-PPV films and light emitting diodes. Complex impedance measurements of (Au or ITO)/MH-PPV/(Au or Al) samples were carried out at room temperature and exposed to white light. Over the frequency range from 100 mHz to
Materials Research. Publicado em: 2008-06
-
7. Fabricação e caracterização de dispositivos poliméricos emissores de luz com camada ativa de poli(2-metóxi, 5-(2-etil-hexilóxi)-1,4-fenileno vinileno) (MEH-PPV) / Fabrication and characterization of polymer light-emitting diodes with active layer composed by poly(2-methoxy, 5-(2-etil-hexilhoxy)-1,4-phenilene vinilene) (MEH-PPV).
Polymer light emitting diodes (PLEDs) have been widely investigated as candidate materials for display fabrication. The main advantages exhibited by PLEDs are the low-cost processing and possibility of large-area display fabrication, in comparison to the conventional liquid crystal displays (LCDs). Although the engineering aspects concerning device fabricati
Publicado em: 2008
-
8. Development of an electronic system of driver and control for perfomance evaluation of displays based on polymer LEDs. / Desenvolvimento de um sistema eletrônico de acionamento e controle para avaliação de desempenho de mostradores de informações baseados em LEDs poliméricos.
In this work it is presented the study and development of an electronic system of test for performance evaluation of polymer light-emitting diodes - PLEDs, or displays with up to 35 PLEDs in passive-matrix produced in laboratory. The drive and control requirements, based in structural and electric characteristics of PLEDs and PLEDs displays, carefully had be
Publicado em: 2007
-
9. Study of charge transport layers in polymer light emitting diodes. / Estudo de camadas transportadoras de cargas em diodos emissores de luz poliméricos.
In the present work, the study of the optical and electrical properties of polymeric electroluminescent devices known as Polymer Light-Emitting Diodes (PLEDs) and the development of Hole Transport Layers (HTLs) to promote an increase of the electrical efficiency of the devices was performed. PLEDs were constructed with structures like Anode/HTL/Electrolumine
Publicado em: 2007
-
10. Avaliação do efeito da indução de polimerização com diferentes fontes de luz e dos meios de envelhecimento sobre a microdureza de cilindros de resina composta / Evaluation of the induction of polymerization effect with different light sources and aging procedures on resin composite microhardness
The aim of this study was to evaluate the effect of the light-curing devices (Halogen/HAL, Light Emitting Diodes/LED, Argon Laser/LAS and Plasma Arc/PAC) and aging procedures on the microhardness of bottom and top surfaces of resin composite cylinders with 4mm height, submitted to thermal and mechanical cycles, and one year storage. For this study 200 specim
Publicado em: 2007
-
11. Síntese de poli(p-fenilenovinileno)s alcoxilados e sua aplicação em diodos emissores de luz e em sensores de gases / Synthesis of alkoxylated poly(p-phenylenevinylene)s and their application in light emitting diodes and in gas sensors
The present work describes the electrosynthesis of three polymers of the poly(p-phenylenevinylene) (PPV) family, having at least one long chain alkoxy group as substituent. These polymers were characterized by spectroscopic analyses (1H NMR, IR and UV-Vis), thermogravimetry (TG), size exclusion chromatography (SEC), cyclic voltammetry and electrically by cur
Publicado em: 2006
-
12. EVOLUTIONARY SYNTHESIS IN NANOTECHNOLOGY / SÍNTESE EVOLUCIONÁRIA EM NANOTECNOLOGIA
The first Nanotechnology concepts were introduced by the American physicist Richard Feynman in 1959, in his famous lecture entitled There´s plenty of room at the bottom. Computational Intelligence has been successfully used in various areas in the academic and industrial worlds. This work investigates the potential of Genetic Algorithms in the optimization
Publicado em: 2006