Polymeric Membrane
Mostrando 1-12 de 90 artigos, teses e dissertações.
-
1. EFFECT OF ALUMINUM SULFATE AND CATIONIC POLYMER ADDITION IN THE MIXED LIQUOR OF A SUBMERGED MEMBRANE BIOREACTOR (SMBR): SLUDGE CHARACTERISTICS AND ORTHOPHOSPHATE REMOVAL IN BATCH EXPERIMENTS
Abstract Submerged Membranes Bioreactors (SMBR) are an established technology for wastewater treatment for water recovery and reuse. However, its routine application is still compromised by the high energy consumption to overcome the fouling effect. This study evaluated the effect of aluminum sulfate and cationic polymer in the orthophosphate removal and slu
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
2. PVC MEMBRANES PREPARED VIA NON-SOLVENT INDUCED PHASE SEPARATION PROCESS
ABSTRACT Polyvinylchloride (PVC) based membranes are prepared via a phase inversion method using N,N-dimethylacetamide (DMAc) as solvent and water as precipitation bath. Polyvinylpyrrolidone (PVP) and lithium nitrate (LiNO3) are used as additives. Experimental cloud point data and solution viscosity measurements are evaluated. Precipitation rates, transport
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
3. Influence of sintering temperature on the development of alumina membrane shaped by centrifugal casting for gas separation
Abstract The development of ceramic membranes for the most diverse separation processes has gained high visibility, mainly due to their better performance in harsh environments in comparison to polymeric materials. Among the different techniques used to prepare tubular ceramic membranes, the centrifugal casting (CC) is interesting for obtaining highly homoge
Cerâmica. Publicado em: 2019-01
-
4. Application of submerged membrane bioreactor technology for the treatment of high strength dairy wastewater
Abstract In this study, an aerobic submerged membrane bioreactor (sMBR) was used for the treatment of dairy wastewater at 15 h of hydraulic retention time (HRT) and 40 d of sludge retention time (SRT) with constant permeate flux (9.5 L.m-3.d-1(LMH)). The COD, ammonia-nitrogen (NH3-N) and orthophosphate (PO4-P) removal efficiencies were 98.2%, 95.4% and 88.9%
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
5. Sulfonation degree effect on ion-conducting SPEEK-titanium oxide membranes properties
Abstract Polymeric membranes were developed using a SPEEK (sulfonated poly(ether ether ketone)) polymer matrix, containing titanium oxide (TiO2) (incorporated by sol-gel method). SPEEK with different sulfonation degrees (SD): 63% and 50% were used. The influence of sulfonation degree on membrane properties was investigated. The thermal analysis (TGA and DTGA
Polímeros. Publicado em: 21/09/2017
-
6. A simple HPLC method for the determination of halcinonide in lipid nanoparticles: development, validation, encapsulation efficiency, and in vitro drug permeation
ABSTRACT Halcinonide is a high-potency topical glucocorticoid used for skin inflammation treatments that presents toxic systemic effects. A simple and quick analytical method to quantify the amount of halcinonide encapsulated into lipid nanoparticles, such as polymeric lipid-core nanoparticles and solid lipid nanoparticles, was developed and validated regard
Braz. J. Pharm. Sci.. Publicado em: 22/06/2017
-
7. MICROFILTRATION AND ULTRAFILTRATION OF Bacillus thuringiensis FERMENTATION BROTH: MEMBRANE PERFORMANCE AND SPORE-CRYSTAL RECOVERY APPROACHES
Abstract Recovery of spores and crystals from the fermentation broth of Bacillus thuringiensis (Bt) was studied using the membrane separation technology. Four types of polymeric membranes, with different characteristics, in the range of microfiltration (MF) and ultrafiltration (UF) were used for evaluating their permeate flux and spore-crystal recovery capac
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
8. Nano and Micro Ceramic Membranes from Degradable Templates
Abstract The nano/microstructures with highly porous surface area have attracted tremendous attention, particularly the synthesis and tailoring of porous and hollow materials of high performance. In this paper, an easy method of cost-effective synthesis of hollow ceramic fiber membranes based on Hydroxyapatite, TiO2 and ZrO2 stabilized with Yttrium, is propo
Mat. Res.. Publicado em: 28/07/2016
-
9. Wettability and Morphological Characterization of a Polymeric Bacterial Cellulose / corn Starch Membrane
The uses of polymer blends have stimulated research to promote a better performance of existing raw materials. The implementation of blends in the production of polymeric membranes has shown great results in regenerative medicine and consequently it has improved the application of biomaterials in this area. This study aimed to evaluate the morphology and wet
Mat. Res.. Publicado em: 04/12/2015
-
10. Polymeric Materials for Membrane Contactor Devices Applied to Water Treatment by Ozonation
AbstractIn water treatment process ozone is applied to disinfection and to remove organic pollutants. Membrane contactor devices are used as a physical barrier to separate two fluids without phase dispersion and it can be used to improve the ozonation efficiency. Polymeric materials are used in membrane contactors and they can react with ozone, suffering deg
Mat. Res.. Publicado em: 2015-10
-
11. Immobilization of myoglobin in sodium alginate composite membranes
Abstract The immobilization of myoglobin in sodium alginate films was investigated with the aim of evaluating the protein stability in an ionic polymeric matrix. Myoglobin was chosen due to the resemblance to each hemoglobin tetramer. Sodium alginate, being a natural polysaccharide, was selected as the polymeric matrix because of its chemica
Polímeros. Publicado em: 2015-06
-
12. Fouling behavior and performance of microfiltration membranes for whey treatment in steady and unsteady-state conditions
Whey pretreatment for protein purification is one of the main applications of cross-flow microfiltration before an ultrafiltration process. In this paper, the effects of the operating pressure and crossflow velocity on the membrane performance and the individual resistances in microfiltration of whey for both unsteady and steady-state conditions were investi
Braz. J. Chem. Eng.. Publicado em: 2014-06