Polyols
Mostrando 1-12 de 107 artigos, teses e dissertações.
-
1. Osmotic dehydration kinetics of fresh and frozen blueberries considering volume shrinkage in a novel ternary solution
Abstract Osmotic dehydration is a nonthermal processing technology, that is limited in blueberries because of the osmotic agent, temperature and efficiency. This study was to prepare a novel ternary solution considering low-sugar, low-salt and low-viscosity requirements and to dehydrate blueberries at 20 °C. The mass transfer kinetics of fresh and frozen bl
Food Sci. Technol. Publicado em: 2021-09
-
2. EFECTO DE LA ADICIÓN DE POLÍMEROS DE CADENA CORTA SOBRE LA ESTRUCTURA QUÍMICA, PROPIEDADES MECÁNICAS, TÉRMICAS Y BIOLÓGICAS DE POLIURETANOS SINTETIZADOS CON DIISOCIANATOS ALIFÁTICOS Y ACEITE DE HIGUERILLA
The objective of this research was to synthesize biocompatible polyurethanes, with suitable mechanical properties to be used as biomaterials. Polyurethanes were synthesized with polyols derived from castor oil and isophorone diisocyanate (IPDI), hexamethylene diisocyanate and 4,4’-methylenebis (cyclohexyl isocyanate), with the addition of polycaprolactone/
Quím. Nova. Publicado em: 2021-01
-
3. Low FODMAPs diet for functional abdominal pain disorders in children: critical review of current knowledge,
RESUMO Objetivo: Nos últimos anos, foram feitos esforços consideráveis para esclarecer o papel da dieta com baixo teor de oligossacarídeos fermentáveis, dissacarídeos, monossacarídeos e polióis (FODMAPs) para o tratamento de distúrbios gastrintestinais funcionais (DGIFs). Esta revisão narrativa teve como objetivo fornecer aos profissionais uma sí
J. Pediatr. (Rio J.). Publicado em: 25/11/2019
-
4. Lithium catalyst concentration influence on bio-polyols structure and polyurethane adhesives properties
ABSTRACT Polyol structure can be affected by the catalyst used for its synthesis and may affect the curing kinetics and mechanical strength of the final polyurethane (PU). This work aimed to study the influence of catalyst concentration on the structure of bio-based polyols and on the final properties of the polyurethane adhesive obtained from these polyols.
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Alternative use of oily fractions of olive oil
Abstract Oily fractions of olive oil not suitable for human consumption used were: lamp oil (AL), olive pomace oil (OO) and clear oil lees (CB). Polyols were obtained by modifications of epoxidation with subsequent hydrolysis (ALH, OOH, CBH) and transesterification (ALHT, OOHT, CBHT) in order to favor, then, the polymerization reactions. The analysis of the
Polímeros. Publicado em: 18/03/2019
-
6. Ultrasound assisted miniemulsion polymerization to prepare poly(urea-urethane) nanoparticles
Abstract Recently, the physical and chemical effects of ultrasound in polymeric materials synthesis have attracted great attention. This work presents the synthesis of novel polymeric materials by polymerization of isophorone diisocyanate with different polyols. Polymers were synthesized by step miniemulsion polymerizations, using ultrasound bath and thermo
Polímeros. Publicado em: 21/05/2018
-
7. Green polyurethane synthesis by emulsion technique: a magnetic composite for oil spill removal
Abstract After the consolidation of the Brazilian biodiesel industry, issues related to the final destination of the glycerin, the by-product from the biodiesel industrial process, drawing the attention of several researchers. There are several uses to this byproduct. Among them, the obtaining of polymers, such as polyurethane (PU), are very encouraged since
Polímeros. Publicado em: 2017-12
-
8. SYNTHESIS, CHARACTERIZATION AND APPLICATION OF A POLYURETHANE-BASED SUPPORT FOR IMMOBILIZING MEMBRANE-BOUND LIPASE
Abstract This study conducted an assessment of polyurethane foams that were synthesized by one-shot process and used as a low-cost support to immobilize Mucor circinelloides URM 4182 whole-cells presenting high lipolytic activity. Polyols with different molecular weights (1100 to 6000 g mol-1) were applied to synthesize the polymer matrix, and the agitation
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
9. Desenvolvimento de tecnologia de pré-polímeros na síntese de poliuretanos empregados em combustíveis sólidos
The aim of this work was to synthesize a polyurethane polymer matrix using polyols as a raw material to obtain a binder such as the hydroxyl terminated polybutadiene (HTPB) pre-polymer in energetic material formulation. The soybean-based polyol was the best starting raw material for producing a binder for solid fuel formulation in rocket motor applications.
Quím. Nova. Publicado em: 2014-07
-
10. Glicólise do poli(3-hidroxibutirato) por via enzimática
Poly(3-hydroxybutyrate), PHB, is a polymer with broad potential applications because of its biodegradability and biocompatibility. However, its high crystallinity is a limiting factor for many applications. To overcome this drawback, one strategy currently employed involves the reduction of the molecular weight of PHB with the concomitant formation of end-fu
Quím. Nova. Publicado em: 2014-06
-
11. Halotolerance, ligninase production and herbicide degradation ability of basidiomycetes strains
Fungi have been recently recognized as organisms able to grow in presence of high salt concentration with halophilic and halotolerance properties and their ligninolytic enzyme complex have an unspecific action enabling their use to degradation of a number of xenobiotic compounds. In this work, both the effect of salt and polyols on growth of the basidiomycet
Braz. J. Microbiol.. Publicado em: 25/02/2014
-
12. Synthesis and application of natural polymeric plasticizer obtained through polyesterification of rice fatty acid
This study includes the synthesis of a new natural plasticizer obtained through esterification reaction of rice fatty acid and polyols, its physicochemical characterization and its preliminary application in polyvinyl chloride (PVC). Monopropylene glycol, octanol and diethylene glycol were used as polyols for esterification reaction. Catalyst Fascat® 4100,
Mat. Res.. Publicado em: 18/02/2014