Precipitate
Mostrando 1-12 de 637 artigos, teses e dissertações.
-
1. Selective formation of neodymium phosphate from iron-neodymium magnet waste
Abstract Neodymium-iron-boron alloy, Nd2Fe14B, is used as a material for magnets. Neodymium is one of the valuable and expensive rare earth elements and is often recovered to reduce costs and environmental impact. Recently, a method for recovering neodymium as neodymium phosphate from mixed solutions was reported. This method was very useful because the main
Cerâmica. Publicado em: 2022
-
2. Design, development, and implementation of 3D-printed polylactic acid centrifuge rotors for laboratory-scale applications
In this work, self-made laboratory centrifuge equipment was developed for the separation of suspensions and immiscible liquids. This centrifuge was based on the Arduino microcontroller and fabricated from simple and recycled mechanical and electronic parts, spending an inexpensive budget suitably. The centrifuge frame and rotors were manufactured of Polylact
Química Nova. Publicado em: 2022
-
3. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
4. The Stabilization of Asphaltenes in Different Crude Fractions: A Molecular Approach
The conditions of petroleum extraction may allow asphaltenes to precipitate, causing deposition that clogs wells, pipes and equipment, consequently reducing productivity. In this work, the solubility parameters and precipitation onset of polar fractions of heavy crudes from Brazilian fields were estimated using a simplified system of n-heptane/toluene mixtur
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
5. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys
Abstract The mechanical properties of age-hardenable aluminum alloys are strongly influenced by the volume fraction, size and spacing of hardening precipitates. In addition, researches have shown that interrupted ageing (T6I4) could benefit the hardening response of these alloys. Interrupted ageing is a term generally used for the microstructural developmen
REM, Int. Eng. J.. Publicado em: 2021-01
-
6. Preparation of Fluorescent Carbon-Based Dots from Waste Tire Pyrolysis
The pyrolysis of waste tire has been proposed as an alternative route to its recycling producing residual oils that can be used as fuels. In this work, a physicochemical process to obtain carbon-based dots (CBD) from carbon black (CBL) derivatives of tires is described. For this, the CBL was treated with different acids to produce CBL1 and CBL2 particles sus
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
7. Thoracic Aortic Aneurysm Surgery in Marfan Patients: a Perspective from the UK
Abstract Objective: Cardiovascular complications in Marfan patients include progressive aortic root dilation which can precipitate acute aortic dissection, ruptured aorta, severe aortic regurgitation, or all the aforementioned. Such complications can be fatal and the cause of death prior to any surgical intervention. We set out to identify the Marfan popula
Braz. J. Cardiovasc. Surg.. Publicado em: 2020-01
-
8. Pharmacological treatment of pain in pregnancy
RESUMO JUSTIFICATIVA E OBJETIVOS: As causas não obstétricas de dor durante a gravidez são muito comuns e podem ser incapacitantes se não forem tratadas adequadamente. O objetivo deste estudo foi discutir o tratamento farmacológico da dor durante o período gestacional com foco na classificação de fármacos e o uso na gravidez, opções de terapia, te
BrJP. Publicado em: 02/12/2019
-
9. Acetylcholinesterase inhibition, antioxidant and identification of some chemical constituents of Phyllanthus atropurpureus cultivated in Egypt
Investigation of the lipid constituents of the aerial parts of Phyllanthus atropurpureus resulted in isolation and identification of the fatty acid mixture which consists of eight acids with linolenic acid as major and the unsaponifiable fraction that contain a series of hydrocabons, sterols, in addition to one triterpene (α-amyrin). The acetone insoluble f
Braz. J. Pharm. Sci.. Publicado em: 07/11/2019
-
10. STABILITY AND TOXICITY PROFILE OF SOLUTION ENHANCED DISPERSION BY SUPERCRITICAL FLUIDS (SEDS) FORMULATED Andrographis paniculata EXTRACT
Abstract The main objective was to evaluate the stability and toxicity of a Solution Enhanced Dispersion by Supercritical Fluids (SEDS) formulated A. paniculata extract that was intended for food applications. The best formulated SEDS A. paniculata extract with improved dissolution of andrographolide (data not shown) was obtained using 25 mg/mL A. paniculata
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
11. Urea-based polymethacrylamide purification
ABSTRACT A purification procedure of polymethacrylamide (PMAm) based on the urea feature of being a powerful Hbond breaker is proposed here. Polymethacrylamide was synthesized in water and the final product presents itself as an insoluble gel what is an obstacle to purification. This physical gel, kept together by numerous interchain H-bonds between amide gr
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. THERMODYNAMIC ANALYSIS AND MODELING OF BRAZILIAN CRUDE OIL AND ASPHALTENE SYSTEMS: AN EXPERIMENTAL MEASUREMENT AND A PC-SAFT APPLICATION
ABSTRACT Asphaltenes represent the heaviest fraction of crude oils, being recognized by their tendency to self-associate and precipitate. Asphaltene precipitation and subsequent deposition can cause problems in all stages of production. The objective of this paper is to model Brazilian crude oil and asphaltene systems using the PC-SAFT equation of state. Asp
Braz. J. Chem. Eng.. Publicado em: 15/07/2019