Radial Distribution
Mostrando 1-12 de 171 artigos, teses e dissertações.
-
1. ASYMMETRIC WETTED SECTOR ANGLE IN WATER DISTRIBUTION OF TRAVELING GUN IRRIGATION SYSTEMS
ABSTRACT This work aimed to simulate the water distribution of traveler gun irrigation, working with asymmetrical wetted angles and in windy conditions. In the simulations of a sprinkler with uniform radial profile, the following were considered: i) wetted angles between 180 and 330°; ii) wetted angle asymmetries from 0 to 90°; iii) wind speeds from 0 to 4
Eng. Agríc.. Publicado em: 2020-08
-
2. THEORETICAL UNDERSTANDING OF MORPHOLOGICAL DISTRIBUTION OF HYDROGEN IN AMORPHOUS CALCIUM SILICATE HYDRATE
Determining the morphological distribution of hydrogen atoms in calcium silicate hydrate phase (C-S-H) is of great concern but challenging. In this work, based on the stoichiometric composition of (CaO)1.7(SiO2)(H2O)1.8, a series of amorphous Ca1.7•Si•(O)3.7-x•(OH)2x•(H2O)1.8-x models are constructed using Monte Carlo method, where x represents the m
Quím. Nova. Publicado em: 20/07/2020
-
3. A Computational Framework for Daily Power Flow Analysis Considering Photovoltaic Distributed Generation
Abstract In Brazil, the demand for the acquisition and installation of photovoltaic systems has grown exponentially and, with that, the importance of studies considering their effects on the distribution grids power flow also grows. Due to the intermittent nature of photovoltaic generation, it is important to approach the analysis in a discrete way, taking i
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
4. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
5. Ore resource estimation based on radial based functions - Case study on União Luiz and Morro do Carrapato Gold Deposits (Alta Floresta Gold Province)
Abstract Radial basis functions can be used as an alternative method for mineral resource estimation when ordinary kriging cannot be done because it is impossible to calculate an experimental variogram. Interpolation based on radial based functions is a method that is similar to ordinary kriging. In this context, this article presents the results of gold res
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
6. Efeito da Taxa de Resfriamento na Liga Ni80Cu20 via Dinâmica Molecular
RESUMO A simulação em Dinâmica Molecular (MD) é uma poderosa ferramenta para estudo de ligas amorfas nanométricas. Neste artigo, a MD foi empregada para o estudo da liga Ni80Cu20. As simulações foram realizadas com o código livre LAMMPS, em um sistema contendo 2.000 átomos com interação atômica dada pelo potencial de Finnis-Sinclair (EAM-FS). O a
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Study of cracks in concrete target under deep penetration by a projectile
Abstract A large number of cracks occur in concrete structure after projectile penetration. The study of crack distribution and propagation process is the basis of damage assessment, structural repair and high dynamic fracture mechanism. In this paper, wire saw cutting, X-ray computed tomography (X-CT) and mechanical property testing of damaged concrete were
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
8. Structural and Photoacoustic Study of Cr11Ge19 Prepared by Mechanical Alloying
A nanostructured Cr11Ge19 phase was produced by mechanical alloying for 15 h. Decomposition occurred for larger milling times, yielding Cr, Ge, Cr2O3 and GeO2. According to the Cr-Ge phase diagram, the Cr11Ge19 phase is stable up to ≈ 928 oC, but, when submitted to milling, a structural instability causes its decomposition. We studied this structural insta
Mat. Res.. Publicado em: 22/06/2017
-
9. Stress Analysis of Thick Spherical Pressure Vessel Composed of Transversely Isotropic Functionally Graded Incompressible Hyperelastic Materials
Abstract In this paper closed form analytical solution for stress components of thick spherical shell made of transversely isotropic functionally graded hyperelastic material subjected to internal and external pressure is presented. Reinforced neo-Hookean strain energy function with variable material parameters is used to model pressure vessel material. The
Lat. Am. j. solids struct.. Publicado em: 2016-03
-
10. Magneto-Elastic Analysis of an Annular FGM Plate Based on Classical Plate Theory Using GDQ Method
Abstract Using GDQ method, the radial and circumferential stresses in an annular FGM plate with a uniform thickness under a transverse axisymmetric load is investigated. It is assumed that a uniform radial magnetic field acts on the top surface of the plate. The modulus of elasticity E and the magnetic permeability coefficient μ of the plate along its thick
Lat. Am. j. solids struct.. Publicado em: 2016
-
11. Nonlinear Electromechanical Stability of a Functionally Graded Circular Plate Integrated With Functionally Graded Piezoelectric Layers
Abstract This research develops nonlinear electromechanical stability of a circular functionally graded plate integrated with functionally graded piezoelectric layers under compressive radial force. Geometric nonlinearity is considered in the strain-displacement relation using Von-Karman relation. The structure is loaded under mechanical and electrical loads
Lat. Am. j. solids struct.. Publicado em: 2015-09
-
12. QSAR Study of the Inhibitors of the Acetyl-CoA Carboxylase 1 and 2 using Bayesian Regularized Genetic Neural Networks: A Comparative Study
Linear and non-linear quantitative structure-activity relationship (QSAR) models were presented for modeling and predicting anti-diabetic activities of a set of inhibitors of acetyl-CoA carboxylase 1 and 2 (ACC1 and ACC2). Different algorithms were utilized to choose the best variables among large numbers of descriptors and then these selected descriptors we
J. Braz. Chem. Soc.. Publicado em: 2015-03