Raw Materials Ceramic
Mostrando 1-12 de 78 artigos, teses e dissertações.
-
1. A review on the production of porous ceramics using organic and inorganic industrial waste
Abstract The use of industrial waste in compositions of ceramic masses has attracted great interest from the scientific community, as they can be considered abundant and diversified alternative sources of raw materials. At the same time, there is a growing interest in the development of porous ceramics due to their wide possibilities for use in various field
Cerâmica. Publicado em: 2022
-
2. A review on the ceramic additive manufacturing technologies and availability of equipment and materials
Abstract Ceramic additive manufacturing allows the fabrication of small series of complex parts without the high costs of molds usually associated with traditional ceramic processing. Although research into ceramic 3D printing by all technologies started back in the 90s, its industrial application is still quite restricted when compared to polymers and metal
Cerâmica. Publicado em: 2022
-
3. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
4. Development of a ceramic membrane for emulsion water-diesel treatment
Abstract The purpose of this study was the development of a low-cost ceramic tubular membrane, using inexpensive materials, namely natural clay, and graphite as a porogenic agent. Such a low-cost membrane can be used as filters or porous supports for the preparation of multilayer ceramic membranes. Extrusion was used as a shape-forming method for this purpos
Cerâmica. Publicado em: 2022
-
5. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
RESUMO Este trabalho investigou o efeito da adição de resíduo de vidro para fabricação de cerâmica de alvenaria. Foram conformados corpos-de-prova cilíndricos de 27 mm de diâmetro por 45 mm de altura, a partir da massa padrão de uma indústria de cerâmica vermelha e outras 3 formulações (5, 10 e 20%) com incorporação de vidro, baseado em estudo
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
7. Characterization of Brazilian Northeastern plastic clays
Resumo Argilas plásticas são uma das principais matérias-primas usadas em tecnologia cerâmica. No entanto, há uma escassez dessas argilas no mundo para o uso em tecnologia de porcelanas. O objetivo deste trabalho foi caracterizar argilas plásticas do nordeste brasileiro. Composições química e mineralógica, distribuição do tamanho de partículas,
Cerâmica. Publicado em: 14/11/2019
-
8. Acid Leaching-Based Synthesis of CdS Yellow Ceramic Pigment with Discarded Ni-Cd Batteries
There is increasing interest in the ceramic industry in the development of pigments with intense tonalities that can be produced from low-cost alternative raw materials and also can fulfill technological and environmental requirements. This work reports on the preparation and characterization of CdS yellow ceramic pigment derived from Ni-Cd batteries through
Mat. Res.. Publicado em: 14/10/2019
-
9. Uma revisão sobre a terminologia e classificação das cerâmicas brancas
Resumo A terminologia dos produtos cerâmicos no mercado e mesmo a encontrada em diversos artigos e livros carece de uma linguagem uniforme quanto aos diversos tipos de produtos das cerâmicas brancas. Ela deve ser norteada por parâmetros técnicos, mas precisa respeitar também a tradição e o histórico de uso e desenvolvimento desses artigos. As diferen
Cerâmica. Publicado em: 15/08/2019
-
10. Chemical conversion of a solid body of the composite gypsum/polyhydroxybutyrate in hydroxyapatite/polyhydroxybutyrate
Resumo A transformação do gesso em hidroxiapatita permite agregar valor a essa matéria-prima, pois a cerâmica obtida possui alto valor comercial em relação ao gesso, enquanto o polímero acrescenta propriedades de biocompatibilidade e bioatividade ao biocompósito. Assim, compósitos de hidroxiapatita/poli-hidroxibutirato foram preparados a partir do g
Cerâmica. Publicado em: 15/08/2019
-
11. Development of hollow fiber membranes with alumina and waste of quartzite
The development of ceramic membranes with different geometries and compositions extends the possibilities of industrial applications, inducing advantages in terms of increased permeability, membrane area by volume module and chemical, thermal and mechanical resistance. The use of low-cost raw materials is a trend that has grown in scientific research. The ai
Mat. Res.. Publicado em: 12/08/2019
-
12. Properties of concrete manufactured with use of ceramic sanitary ware waste as aggregate
RESUMO Na fabricação do concreto, cimento (o Portland é o mais usado), água e agregados (classificados em finos e grossos), são usados. Com a utilização de inúmeras matérias-primas, a geração de resíduos é inevitável, seja na construção civil ou em outros setores, como as indústrias produtoras de materiais cerâmicos. Entre os tipos de resí
Matéria (Rio J.). Publicado em: 10/06/2019