Reduced Mathematical Model
Mostrando 1-12 de 100 artigos, teses e dissertações.
-
1. Steel desulfurization on RH degasser: physical and mathematical modeling
Abstract Due to the high-quality steel demand, especially for ultra-low Sulfur steel, RH desulfurization has been practiced. Based on this, mathematical and physical modeling have been applied to study steel desulfurization by reagent addition in the RH degasser vacuum chamber. The main result of cold modeling, using water and oil emulating steel and slag, r
REM - International Engineering Journal. Publicado em: 2022
-
2. Physical and mathematical modeling of inclusion behavior in a tundish with gas curtain
Abstract Gas injection in the tundish has been considered as an alternative to optimizing inclusion removal from steels. In the present study, physical and mathematical modeling were used to investigate the effect of gas injection in the tundish on the inclusion removal efficiency. The physical model is a 1/3 reduced scale of an industrial two-strand tundish
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. Dinâmica de geração e dissipação do estresse na equipe de enfermagem num centro de oncologia
Objetivo: representar a dinâmica de geração, acumulação e dissipação do estresse na equipe de enfermagem em um centro de terapia oncológica. Método: um modelo de simulação matemático de dinâmica de sistemas foi desenvolvido com base na coleta de dados in loco. O modelo serviu para testar o impacto de três políticas direcionadas a reduzir o e
Rev. Latino-Am. Enfermagem. Publicado em: 18/07/2019
-
4. MODEL PREDICTIVE CONTROL FOR PRODUCTION OF ULTRA-LOW SULFUR DIESEL IN A HYDROTREATING PROCESS
ABSTRACT There is a continual desire around the world to reduce the sulphur content of diesel fuel to ultra-low levels (below 10 ppm) due to environmental concerns and the intention of improving air quality and lowering harmful exhaust emissions of diesel engines. In this work, a hydrodesulfurization unit fed with multiple diesel streams was addressed using
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
5. A Mathematical Model for Simulating Meteor Showers
RESUMO Neste trabalho, apresenta-se um modelo matemático que possibilita a simulação da trajetória de um meteoro como visto por um observador localizado em qualquer região na Terra. A estratégia de solução consiste em definir um novo sistema de coordenadas, denominado Sistema Radiante de Coordenadas, que é centrado no observador e tem seu eixo z ali
TEMA (São Carlos). Publicado em: 30/05/2019
-
6. Modelagem e propriedades termodinâmicas da secagem de fatias de acuri
Resumo O acuri é uma fruta pouco explorada industrialmente, mas com grandes perspectivas e possibilidades de uso. Para tanto, torna-se necessário reduzir o seu teor de água, aumentando então a sua vida útil, o que possibilitará sua utilização em mercados distantes dos locais de produção. Nesse sentido, objetivou-se secar fatias de acuri, com espes
Braz. J. Food Technol.. Publicado em: 18/04/2019
-
7. Water sorption isotherms of cooked hams as affected by temperature and chemical composition
Abstract This study was focused on the determination of the chemical composition and experimentally obtaining the sorption isotherms for four samples of commercial cooked ham subjected to simulated commercial storage conditions. The isotherms were determined using the gravimetric method. The mathematical models of Guggenhein, Anderson and de Boer; Brunauer,
Food Sci. Technol. Publicado em: 13/12/2018
-
8. Development of Mathematical Programming Model for Cable Logging System Location
ABSTRACT Defining the optimum points for installing of a cable logging system is a problem faced by forestry planners. This study evaluated the application of a mathematical programming model for optimal location of cable logging in wood extraction. The study was conducted in a forestry company located in Parana State, Brazil. We collected data during timbe
Floresta Ambient.. Publicado em: 10/12/2018
-
9. Desdoblamiento de la transformación martensítica en un acero F82H de activación neutrónica reducida
ABSTRACT One of the most promising solutions to global energy supply is nuclear fusion. This process, which is implemented in nuclear fusion reactors (from which one of the first designs was the Tokamak), involves deuterium-tritium plasmas at very high temperature, confined in vacuum chambers of toroidal shape under the influence of strong magnetic fields. T
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Mathematical modeling of the shaft furnace process for producing DRI based on the multiphase theory
Abstract A numerical model based on transport equations for momentum, energy and chemical species for the gas and solid phases is proposed to simulate the inner phenomena in the direct reduction of the shaft furnace process for producing directly reduced iron (DRI). The model is verified using industrial data for productivity, raw materials and final composi
REM, Int. Eng. J.. Publicado em: 2018-03
-
11. Drying kinetics of barley grains and effects on the germination index
Abstract This study aimed to assess the drying kinetics of barley grains and, using mathematical modeling, to evaluate the diffusivity during drying and after drying to evaluate the effect of high drying temperatures on the seed germination index for malt production. Three drying temperatures 40, 60 and 80°C were used. The last two, 60 and 80°C, reached mo
Food Sci. Technol. Publicado em: 24/10/2016
-
12. A NEW MATHEMATICAL MODEL FOR THE WORKOVER RIG SCHEDULING PROBLEM
ABSTRACT One of the most important activities in the oil and gas industry is the intervention in wellsfor maintenance services, which is necessary to ensure the constant production of oil. These interventions are carried out by workover rigs. Thus, the Workover Rig Scheduling Problem (WRSP) consists of finding the best schedule to service the wells while con
Pesqui. Oper.. Publicado em: 2016-08