Refining Of Oil
Mostrando 1-12 de 64 artigos, teses e dissertações.
-
1. Reusable Heterogeneous SnO2/ZnO Catalyst for Biodiesel Production from Acidified/Acid Oils
A catalyst comprised of SnO2 impregnated on ZnO nanowires, which presented remarkable ability to catalyze fatty acid esterification/transesterification reactions, is reported. For optimization of reaction conditions, artificially acidified soybean oil with 10 wt.% oleic acid was used as a model feed. The optimized conditions were: 150 °C, 6 h, 5 g of oil, c
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
2. Optimization of sunflower oil bleaching parameters: using Response Surface Methodology (RSM)
Abstract Bleaching is an important part of the oil refining process, in which pigments, impurities, traces of metals, and oxidative-molecular components of oils are removed. In this regard, the optimization of bleaching conditions can be effective to increase oil quality. In this study, de-gummed and neutralized sunflower oil was bleached at 80, 90, 100, 110
Food Sci. Technol. Publicado em: 2020-06
-
3. Optimization of sunflower oil bleaching parameters: using Response Surface Methodology (RSM)
Abstract Bleaching is an important part of the oil refining process, in which pigments, impurities, traces of metals, and oxidative-molecular components of oils are removed. In this regard, the optimization of bleaching conditions can be effective to increase oil quality. In this study, de-gummed and neutralized sunflower oil was bleached at 80, 90, 100, 110
Food Sci. Technol. Publicado em: 30/09/2019
-
4. Aplicação de processo adsortivo para dessulfurização de combustíveis utilizando fibra de coco como adsorvente
RESUMO A presença de compostos orgânicos contendo enxofre nos combustíveis é um dos contribuintes da poluição atmosférica, pois quando entram em combustão nos motores, emitem poluentes derivados do enxofre, como os óxidos (SOx), que afetam negativamente a saúde humana e o meio ambiente. A remoção do excesso de enxofre presente na gasolina pode se
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. EVALUATION OF DISTILLATION CURVES FOR BIO-OIL OBTAINED FROM THERMAL CRACKING OF WASTE COOKING OIL
ABSTRACT Bio-oil obtained from thermal cracking of waste cooking oil (WCO) is a complex mixture of different chemical compounds and, like crude oil, it is composed mainly of hydrocarbons. The large number of compounds in bio-oil leads to complex and expensive methods for its properties determination. In this study, the distillation curves were constructed fo
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
6. Fracture Behavior and Fatigue Performance of Inconel 625
Inconel 625 is a nickel-based highly-resistant superalloy widely used in aerospace components, in the nuclear industry, and especially in the maritime industry. Materials such as Inconel 625 have been widely used in oil exploration of Brazilian pre-salt layers due to their excellent resistance to corrosion under tension, pitting and crevice corrosion by chlo
Mat. Res.. Publicado em: 25/06/2018
-
7. ASSESSMENT OF CO2 EMISSION MITIGATION FOR A BRAZILIAN OIL REFINERY
Abstract Currently the oil refining sector is responsible for approximately 5% of the total Brazilian energy related CO2 emissions. Possibilities to reduce CO2 emissions and related costs at the largest Brazilian refinery have been estimated. The abatement costs related to energy saving options are negative, meaning that feasibility exists without specific i
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
8. ANÁLISE EXPLORATÓRIA DAS CONCENTRAÇÕES DOS METAIS NA, CA, MG, SR E FE EM EXTRATO AQUOSO DE PETRÓLEO, DETERMINADOS POR ICP OES, APÓS OTIMIZAÇÃO EMPREGANDO PLANEJAMENTO DE EXPERIMENTOS
AbstractThe purpose of this study was to evaluate the best operating conditions of ICP OES for the determination of Na, Ca, Mg, Sr and Fe in aqueous extract of crude oil obtained after hot extraction with organic solvents (ASTM D 6470-99 modified). Thus, the full factorial design and central composite design were used to optimize the best conditions for the
Quím. Nova. Publicado em: 2015-08
-
9. Conversion of by-products from the vegetable oil industry into biodiesel and its use in internal combustion engines: a review
Biodiesel produced from by-products and waste materials can be an economical way of reducing traditional oil consumption and environmental problems. The by-products from the vegetable oil refining industry such as soapstock, acid oil and fatty acid distillates are suitable for producing biodiesel. The present work is a survey related to the use of these by-p
Braz. J. Chem. Eng.. Publicado em: 2014-06
-
10. Refining of Buriti oil (Mauritia flexuosa) originated from the Brazilian Cerrado: physicochemical, thermal-oxidative and nutritional implications
J. Braz. Chem. Soc.. Publicado em: 2014-01
-
11. Stigmastadiene and specific extitntion (270 nm) to evaluate the presence of refined oils in virgin olive oil commercialized in Brazil
The increased marketing of olive oil in Brazil has intensified legal requirements to ensure regulation of this product. The measurement of the specific extinction at 270 nm (E 270) and content of stigmastadiene can be used to assess the presence of refined oils in virgin olive oil. During the vegetable oil refining process, compounds with conjugated double b
Food Sci. Technol. Publicado em: 20/08/2013
-
12. Chemical modification of cobalt ferrite nanoparticles with possible application as asphaltene flocculant agent
Asphaltenes can cause enormous losses in the oil industry, because they are soluble only in aromatic solvents. Therefore, they must be removed from the petroleum before it is refined, using flocculant agents. Aiming to find new materials that can work as flocculant agents to asphaltenes, cobalt ferrite nanoparticles were chemically modified through acid-base
Mat. Res.. Publicado em: 02/04/2013