Rietveld Analysis
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Analysis and evaluation of structural properties of Co3O4 microparticles obtained at low temperature
Abstract In the present research, the synthesis of cobalt oxide Co3O4 was carried out using the sol-gel technique with subsequent heat treatment at 225 and 235 °C. The final product obtained was characterized by X-ray diffraction (XRD), showing a pure crystalline phase of Co3O4, cell parameters a=b=c=8.071 Å, and a volume of 525.7 Å3. The particle size wa
Cerâmica. Publicado em: 2022
-
3. X-ray line profile analysis and magnetic and optical properties of FexZn0.95-xCr0.05O nanoparticles fabricated by sol-gel route
Abstract FexZn0.95-xCr0.05O nanoparticles have been obtained for the different concentrations of Fe ions by using the sol-gel method. The hexagonal wurtzite structure of all the samples was confirmed by Rietveld refined X-ray diffraction patterns. The addition of Fe ions decreased lattice constants a and c from 3.2487 to 3.2474 Å and 5.2043 to 5.2029 Å, re
Cerâmica. Publicado em: 2022
-
4. Biphasic 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 nanopowders by in situ sol-gel synthesis
Abstract Nanopowders of the 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 (x=0, 0.25, 0.5, 0.75, and 1) were synthesized by the in situ sol-gel method using poly(acrylic acid) (PAA1800) as a chelating agent. The synthesis developed using PAA1800 ensured the simultaneous crystallization of two phases. The results provided a reliable method for producing biphasic nanopowders i
Cerâmica. Publicado em: 2022
-
5. An alternative route to extract nickel and cobalt from non-commercial laterite ore
Abstract Laterite ores, which represent around two-thirds of nickel reserves, became an important source of nickel and cobalt metals. The objective of the present study was to investigate the efficiency of a hybrid route to extract nickel and cobalt present in a laterite ore sample which was not commercially attractive to be processed through the current rou
REM - International Engineering Journal. Publicado em: 2022
-
6. Microstructure and diametral fracture strength of spark plasma sintered WC-6Co-0.2B and WC-6Co-0.5B ceramic composites from nanosized and metastable WC powders
Abstract The present work aimed at evaluating the microstructures and mechanical properties of spark plasma sintered WC-6 wt% Co ceramic composites doped with boron (0.2 and 0.5 wt%). W-50 at% C (W-6.13 wt% C) powders produced under different milling times (20, 60, 180, and 600 min) were used as starting materials and subsequently mixed with Co (6 wt%) and B
Cerâmica. Publicado em: 2022
-
7. Crystallographic Changes Accompanying the Verwey Transition in a Magnetite from Steatite
The crystallographic structural analysis of the magnetite of a steatite rock at 298 K, (saturation magnetization, σ = 95.0 J T-1 kg-1) showed two cubic networks and, below Verwey temperature (TV ca.120 K) a monoclinic structure, basing on their cell dimensions and different transitional behaviors when reducing the temperature. A monoclinic structure was ide
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
8. Fish Bone as a Source of Raw Material for Synthesis of Calcium Phosphate
Fish bone is rich in calcium carbonate, which makes it an alternative source of low cost calcium carbonate for the synthesis of calcium phosphate bioceramic for use in bone regeneration. The calcium phosphate bioceramic was prepared by a wet precipitation method with acid and base reactions. The synthesized bioceramic was characterized in terms of X-ray diff
Mat. Res.. Publicado em: 28/10/2019
-
9. Microstructure and Electrical Characterization of Thermoelectric Nanocrystalline Bi2 Te3 Synthesized by Mechanical Alloying
Nanocrystalline bismuth telluride, Bi2Te3 has been synthesized by mechanical alloying (MA) the powder mixture composed of Bi and Te in the inert gas atmosphere within a short duration of 15 min. Microstructure characterization of the prepared powder has been investigated adopting the Rietveld’s method using X-Ray diffraction (XRD) data and analyzing high-r
Mat. Res.. Publicado em: 28/10/2019
-
10. Caracterização do composto de CuCr2O4 obtido pelo método da reação de combustão em solução
RESUMO O material CuCr2O4 foi sintetizado pela reação de combustão em solução e tratado termicamente na faixa de 600 à 1100oC, afim de verificar a evolução das fases. O composto foi carcterizado estrutural e morfologicamente por meio das técnicas de Difração de Raios X (DRX), refinamentos pelo método de Rietveld, Microscopia Eletrônica de Varred
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Síntese e caracterização de cobaltita de níquel (NiCo2O4) obtida pelométodo dos precursorespoliméricos
RESUMO A cobaltita de níquel (NiCo2O4) de estrutura do tipo espinélio apresenta baixa estabilidade térmica em torno dos 400 °C, que ocasiona a perda de NiO, afetando de maneira significativa as propriedades físicas e estruturais do material produzido. Neste trabalho a cobaltita de níquel foi preparada pelo método dos precursores poliméricos. O materi
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Dielectric Behavior of α-Ag2WO4 and its Huge Dielectric Loss Tangent
The microwave-assisted hydrothermal method was used to obtain α-Ag2WO4. Rietveld refinement confirmed that α-Ag2WO4 is stable in the orthorhombic phase, without secondary phase. However, field-effect scanning electron microscope analysis showed that α-Ag2WO4 nanorods surfaces contain silver nanoparticles, confirmed by the X-ray photoelectron spectroscopy
Mat. Res.. Publicado em: 02/09/2019