S Formation
Mostrando 1-12 de 8150 artigos, teses e dissertações.
-
1. Tailoring the properties of Y2O3 via synthesis parameters varied during the PVA-assisted sol-gel route
Abstract The effect of synthesis parameters on the microstructural behavior and morphology during the yttrium oxide (Y2O3) formation is reported. Y2O3 crystals were produced by a modified sol-gel route assisted by polyvinyl alcohol solution varying the calcination temperature and solution pH. The crystalline phase formation was investigated using X-ray powde
Cerâmica. Publicado em: 2023
-
2. Sedimentation and rheological behavior of reactive and non-reactive magnesium hydroxide pulps for industrial spray dryer processing
Abstract Two different reactive concentrated magnesium hydroxide (HM) pulps, produced in a lab reactor mill, and a synthetic and non-reactive HM-pulp, for comparative analyses, have been prepared and studied. Sodium polyacrylate was selected as a dispersant for improving the HM pulp fluidity, with concentrations varying from 0.42% to 2.0% on a dry basis. The
Cerâmica. Publicado em: 2023
-
3. Synthesis of delafossite CuCrO2 via solution combustion method and its acid functionalization for biodiesel production
Abstract CuCrO2 was synthesized by solution combustion synthesis (SCS) and applied as a heterogeneous catalyst to produce soybean biodiesel. The combustion reaction was carried out using urea as a fuel, and copper (II) and chromium (III) nitrates as precursors. After the powders’ obtention, these were calcined and functionalized in an acidic medium. The po
Cerâmica. Publicado em: 2023
-
4. Study of rhombohedral tricalcium phosphate in hexagonal crystal structure family on the sample prepared by the sol-gel route and the effect of calcination temperature
Abstract The effect of the calcination temperature at 800 and 1000 °C on the stable formation of the tricalcium phosphate with rhombohedral structure in the system of the hexagonal crystal family was determined, while its precursor was made from limestone obtained from nature in the Lumajang district, Indonesia. The rhombohedral tricalcium phosphate samples
Cerâmica. Publicado em: 2023
-
5. Evaluation of toxin-antitoxin genes, antibiotic resistance, and virulence genes in Pseudomonas aeruginosa isolates
SUMMARY OBJECTIVE: Toxin-antitoxin genes RelBE and HigBA are known to be involved in the formation of biofilm, which is an important virulence factor for Pseudomonas aeruginosa. The purpose of this study was to determine the presence of toxin-antitoxin genes and exoenzyme S and exotoxin A virulence genes in P. aeruginosa isolates and whether there is a rela
Revista da Associação Médica Brasileira. Publicado em: 2023
-
6. Mesh reinforcement in masonry mortar coatings: a systematic literature review
Abstract Mortar coatings have a major influence on a building’s aesthetics, valorization, and habitability, with significant effects on the mechanical behavior of masonry walls. Multiple types of meshes can be embedded in plaster to enhance both masonry and coating’s mechanical behavior, restrain crack formation, enhance the bonding between layers, and i
Cerâmica. Publicado em: 2023
-
7. The Contribution of Meteorological Parameters and the COVID-19 Partial Lockdown on Air Quality in Rio de Janeiro, Brazil
This study evaluated the pollutant levels (NO2, SO2, CO, and O3), air quality index (AQI) and the influence of meteorological variables and coronavirus disease (COVID-19) pandemic on the air quality in Rio de Janeiro. The data set used comprises periods before (March-April, 2019) and during pandemic (March-April, 2020). According to the AQI results, on most
Journal of the Brazilian Chemical Society. Publicado em: 2023
-
8. Phase transformation of kaolinite to hexagonal kalsilite using K2CO3
Abstract Hydrothermal synthesis of kalsilite was facilitated by the inclusion of potassium carbonate (K2CO3) as the source of the potassium ion. After a 24 h reaction at 220 °C, kaolin clay treated with 1.25 M K2CO3 showed the most significant peaks at 2θ of 28.5° and 34.7° by X-ray diffraction corresponding to the hexagonal kalsilite. In addition, field
Cerâmica. Publicado em: 2022
-
9. Synthesis and characterization of α-SnWO4 powders obtained by microwave-assisted hydrothermal method
Abstract The structural, morphological, and optical properties of α-SnWO4 synthesized by microwave-assisted hydrothermal method at 150 °C for different times were investigated. XRD revealed the formation of the orthorhombic phase, without the presence of a secondary phase. The sample processed for 64 min showed a reduction in unit cell volume, suggesting a
Cerâmica. Publicado em: 2022
-
10. AVALIAÇÃO DE METAIS POTENCIALMENTE TÓXICOS EM CHORUME PROVENIENTE DE ÁREA DE DEPOSIÇÃO DE RESÍDUOS SÓLIDOS EM BELÉM - PARÁ
The formation of solid waste is a global challenge regarding environmental preservation. Due to the lifestyle of modern society, which aims to improve practicality, new products are constantly being released in the market and increasing the formation of waste. The decomposition of waste from various origins produces a dark liquid named leachate, which presen
Química Nova. Publicado em: 2022
-
11. Biomarkers in Source Rocks from Barreirinha Formation (Devonian): Distribution and Paleoenvironment Significance
The Barreirinha Formation-Upper Devonian, is the main petroleum source rock of the Amazon Basin, deposited during the great Devonian Transgression, contributing to significant accumulations of organic matter (OM) in anoxic conditions, which allowed its preservation. The present work had the objective of characterizing the molecular composition of biomarkers
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
12. A Finite-Difference Time-Domain Formulation for Modeling Air Ionization Breakdown Streamers
Abstract A numerical model based on the finite-difference time-domain (FDTD) method is developed for calculating discharge currents and fields produced due air ionization between two electrodes. Electric conductivity σ of the ionized channel between two electrodes is calculated using non-linear equations, i.e., σ is obtained using functions of time. The fu
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022