Scanning Electron Microscopy Sem
Mostrando 1-12 de 1090 artigos, teses e dissertações.
-
1. Synthesis of delafossite CuCrO2 via solution combustion method and its acid functionalization for biodiesel production
Abstract CuCrO2 was synthesized by solution combustion synthesis (SCS) and applied as a heterogeneous catalyst to produce soybean biodiesel. The combustion reaction was carried out using urea as a fuel, and copper (II) and chromium (III) nitrates as precursors. After the powders’ obtention, these were calcined and functionalized in an acidic medium. The po
Cerâmica. Publicado em: 2023
-
2. Study of nanocomposites with carbon nanotubes and their tendency for carbon organization
Abstract The carbon derived from the thermal treatment of modified phenolic resins (PR) tends to organize into graphitic lamellae or turbostratic carbon and is commonly considered non-graphitizable. In this study, nanocomposites were synthesized with modified phenolic resin (Novolac) used as the matrix and oxidized multi-walled carbon nanotubes (NTox) in amo
Cerâmica. Publicado em: 2022
-
3. Characterization of micaceous minerals occurring in phosphate ores in Brazil: emphasis on the interstratified phyllosilicates
Abstract Micaceous minerals were characterized in three phosphatic ores from mines in Western Minas Gerais State, Brazil, all having complex chemical and mineralogical compositions, with emphasis on interstratified phyllosilicates. Knowledge of the relationship between the physical and chemical characteristics of the phyllosilicates contributed to a better u
REM - International Engineering Journal. Publicado em: 2022
-
4. Graphite-Polyurethane Composite Electrode Modified with Molecularly Imprinted Polymer for Determination of Diclofenac
A molecularly imprinted polymer (MIP) was prepared using the anti-inflammatory diclofenac (DCF) as a template. A non-imprinted polymer (NIP) was also prepared as a control. These MIP and NIP were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET), revealing a higher porosity in the fir
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
5. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022
-
7. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
8. A química analítica aplicada aos estudos de pigmentos rupestres: uma revisão
Instrumental advances have been employed in the study of archeological remains such as prehistoric rupestrians paintings with the objective of chemically characterizing them in order to reconstruct the cultural technologies of a prehistoric human group and/or to support conservation science studies. The analytical techniques most commonly used in archaeometr
Química Nova. Publicado em: 2022
-
9. Enhancement of Visible Light-Responsive Photocatalytic Efficiency by Using a Laccaic Acid-Modified Titanium Dioxide Photocatalyst
In this study, a laccaic acid-modified TiO2 photocatalyst (Lac-TiO2) was prepared via an impregnation method with 0.50, 1.00, 2.50, and 5.00 wt.% laccaic acid. The products’ physical properties were examined through X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), X-ray photoemission spectroscopy (XPS), UV-Vis diffused
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
10. Preparation and performance of magnetic zirconium-iron oxide nanoparticles loaded on palygorskite in the adsorption of phosphate from water
Magnetic zirconium-iron oxide nanoparticles loaded on palygorskite as a low-cost adsorbent was produced by one-step co precipitation technique and its properties for phosphate adsorption were overall investigated. The Brunauer Emmett Teller (BET) specific surface area analysis, scanning electron microscopy (SEM), thermo gravimetric analysis (TGA), Fourier tr
Química Nova. Publicado em: 2022
-
11. A Novel In Silico Monte Carlo Approach to Optimize a PSD Estimation Problem. Generation of Data Fusion Experiment Rules
ABSTRACT This article analyzes the performance of combining information from Scanning Electron Microscopy (SEM) micrographs with Static Light Scattering (SLS) measurements for retrieving the so-called Particle Size Distribution (PSD) in terms of experimental features. The corresponding data fusion is implemented using a novel Monte Carlo-based method consist
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
12. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022