Separation Membranes
Mostrando 1-12 de 271 artigos, teses e dissertações.
-
1. POLYETHERIMIDE/POLYVINYLPYRROLIDONE HOLLOW-FIBER MEMBRANES FOR USE IN HEMODIALYSIS
Abstract In this study, polyetherimide/polyvinylpyrrolidone (PEI/PVP) hollow fiber membranes (HFMs) were synthesized by the phase inversion method. The synthesized PEI/PVP membranes were characterized by morphological analysis and transport properties (hydraulic permeability and solute rejection coefficient). Their performance in uremic solutes separation wa
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Influence of the methodology on the formation of zeolite membranes MCM-22 for the oil/water emulsion separation
Resumo Esse trabalho teve por objetivo produzir membranas zeolíticas MCM-22 utilizando dois métodos distintos de síntese, dip coating (DC) e transporte em fase vapor (VPT), para serem avaliadas no processo de separação emulsão óleo/água. As membranas foram preparadas a 150 °C por 10 dias, caracterizadas por difração de raios X e microscopia eletr�
Cerâmica. Publicado em: 14/11/2019
-
3. Preparation of low-cost ceramic membranes for microfiltration using sugarcane bagasse ash as a pore-forming agent
Resumo Membranas cerâmicas são de grande interesse industrial em processos de separação. Elas são caracterizadas por elevada estabilidade química/térmica e capacidade de filtração em temperaturas acima de 500 °C em uma larga faixa de valores de pH. Entretanto, a grande desvantagem das membranas cerâmicas é o elevado custo de produção envolvendo
Cerâmica. Publicado em: 14/11/2019
-
4. BROMELAIN SEPARATION AND PURIFICATION PROCESSES FROM PINEAPPLE EXTRACT
Abstract The concern about the effective use of agro-industrial residues from the food industry has increased. Bromelain is an enzyme mainly obtained from the pineapple plant (A. comosus), including its parts normally considered as waste. It is a high value-added product with a wide variety of applications such as in food, cosmetic and pharmaceutical industr
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
5. PVC MEMBRANES PREPARED VIA NON-SOLVENT INDUCED PHASE SEPARATION PROCESS
ABSTRACT Polyvinylchloride (PVC) based membranes are prepared via a phase inversion method using N,N-dimethylacetamide (DMAc) as solvent and water as precipitation bath. Polyvinylpyrrolidone (PVP) and lithium nitrate (LiNO3) are used as additives. Experimental cloud point data and solution viscosity measurements are evaluated. Precipitation rates, transport
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
6. PREPARATION AND CHARACTERIZATION OF THIN-FILM COMPOSITE REVERSE OSMOSIS MEMBRANE ON A NOVEL AMINOSILANE-MODIFIED POLYVINYL CHLORIDE SUPPORT
ABSTRACT Herein, the influence of pure and modified polyvinyl chloride (PVC) support layers on the performance of thin-film composite (TFC) membranes was investigated in water desalination. Accordingly, the PVC support was modified using (3-Aminopropyl) triethoxysilane (APTES) through bulk modification. The supports were synthesized at different doses of APT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
7. Self-assembly modification of polyamide membrane by coating titanium dioxide nanoparticles for water treatment applications
Resumo O principal objetivo do presente estudo foi modificar a superfície de uma membrana de poliamida comercial com a deposição de nanopartículas de TiO2 pelo método self-assembly sob pressão com alta permeabilidade e atividade fotocatalítica. Mudanças nas características da membrana e seu desempenho nas propriedades fotocatalíticas foram avaliado
Rev. Ambient. Água. Publicado em: 20/05/2019
-
8. Influence of sintering temperature on the development of alumina membrane shaped by centrifugal casting for gas separation
Abstract The development of ceramic membranes for the most diverse separation processes has gained high visibility, mainly due to their better performance in harsh environments in comparison to polymeric materials. Among the different techniques used to prepare tubular ceramic membranes, the centrifugal casting (CC) is interesting for obtaining highly homoge
Cerâmica. Publicado em: 2019-01
-
9. Membranas Compuestas: propiedades superficiales y estabilidad térmica
ABSTRACT The composite membranes were manufactured with crosslinking poly(vinyl alcohol) on polyethersulfone porous membranes by coating process. PES membranes were exposed to air plasma for the purpose of surface modification. The coating of the support membrane was carried out by using a polymer matrix with a crosslinking agent. The physico-chemical proper
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. CORK MEMBRANE FOR EFFICIENT OIL AND WATER SEPARATION
Cork is a renewable, biocompatible, environmentally friendly and abundant biological material with microscale cellular structure. Fabrication of filtration membranes for the separation of oil and water by utilizing such natural materials to replace nonnatural membranes is a green method. A cork membrane with a water contact angle greater than 150° and an oi
Quím. Nova. Publicado em: 2018-07
-
11. A Dual-mode model interpretation of CO2/CH4 permeability in polysulfone membranes at low pressures
ABSTRACT An asymmetric membrane of polysulfone (PSf) was synthesized by phase inversion method. Permeation experiments were carried out between 2 to 5 bar pressure, and at temperatures 20 to 45°C. The dense-selective layer of PSf membrane presents regular thickness (about 5 µm), and was not possible to observe the formation of macrovoids in porous layer. T
An. Acad. Bras. Ciênc.. Publicado em: 2018-04
-
12. Harmonious interaction of incorporating CNTs and zeolitic imidazole frameworks into polysulfone to prepare high performance MMMs for CO 2 separation from humidified post combustion gases
Abstract Multi-walled carbon nanotubes (CNTs) and zeolitic imidazole frameworks (ZIF-301) were synergistically incorporated into glassy polysulfone (PSF) to prepare mixed-matrix membranes (MMMs) to separate CO2 from post combustion flue gas. The flexible MMMs rendering consistent distribution and improved adhesion of nanofillers with the polymer matrix were
Braz. J. Chem. Eng.. Publicado em: 2018-01