Shear Flow
Mostrando 1-12 de 284 artigos, teses e dissertações.
-
1. Effect of Welding Heat Input on the Microstructure and Mechanical Properties of Dissimilar Friction Stir-Welded Copper/Brass Lap Joint
Dissimilar lap welded joints of copper and brass metals were fabricated by friction stir welding (FSW) method at various welding heat inputs. The effect of welding heat inputs on the microstructure and mechanical properties of overlap welded joints at at two different join configurations (i.e. Advancing side and Retreating side joint configurations) was inve
Mat. Res.. Publicado em: 26/08/2019
-
2. RHEOLOGICAL BEHAVIOR OF A SILVER AQUEOUS NANOFLUID STABILIZED WITH AMINOSILANE-BASED SURFACTANT UNDER CONFINED FLOW
ABSTRACT The rheological behavior of an aqueous suspension of silver nanoparticles stabilized with aminosilane-based surfactant flowing under confinement was investigated. Three stability levels were defined based on the zeta potential: high (41.73 mV, pH 4.3), medium (10.44 mV, pH 7.4), and low (0.74 mV, pH 8.6). Furthermore, the preliminary investigation s
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
3. Experimental bedforms by saline density currents
Abstract Bedforms are sedimentary features that can be generated on the seafloor by the interaction between density currents and mobile beds. Developing knowledge about the hydraulic and sedimentary processes involved during these events is in the interest of research groups and oil companies. Because of the magnitude of the density currents in its natural e
Braz. J. Geol.. Publicado em: 20/05/2019
-
4. Rheological behavior of concentrated tucupi
Abstract Tucupi, which is widely enjoyed in the North region of Brazil, is a fermented liquid derived from cassava (Manihot esculenta Crantz) and has been taken abroad for its exotic characteristics. This study aimed to assess the rheological behavior of tucupi with 30, 35, and 40% solids and concentrated at 50, 70, and 90 °C. The rheological data were obt
Food Sci. Technol. Publicado em: 29/11/2018
-
5. Wheat flour and gum cordia composite system: pasting, rheology and texture studies
Abstract Native and acetylated freeze-dried gum cordia (GC) was replaced at 0, 3, 5 and 10% (w/w) of wheat flour, and their pasting and rheological properties were studied. The pasting data indicated a significant (p≤0.05) increase in peak and final viscosities of blends: especially at higher GC concentrations. The shearing profiles signified an increase
Food Sci. Technol. Publicado em: 26/07/2018
-
6. Diseño, simulación y análisis del proceso de extrusión de un perfil termoplástico en PVC rígido para optimizar el diseño de la matriz y los parámetros
ABSTRACT The objective of the present work was to verify and optimize the die design to manufacture a thermoplastic profile in rigid PVC using the simulation of the flow in the mentioned matrix through the use of Computational Fluid Dynamics (CFD) and through tests in extrusion, using an experimental calibrator, the required geometry and dimensions were obta
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Wave transmission across laminated composite plate in the subsonic flow Investigating Two-variable Refined Plate Theory
Abstract The main aim of this paper is to employ an extension of two-variable Refined Plate Theory (RPT2) to determine Sound Transmission Loss (STL) across laminated composite plate in contrast to external excitation. It should be noted that RPT2 known as a second type of Refined Plate Theory which includes the extension term in displacement field. To achie
Lat. Am. j. solids struct.. Publicado em: 14/06/2018
-
8. A Statistical Dynamic Model for the Turbulent Transport of Kinetic Energy in Shear Layers
ABSTRACT: Dynamic statistical equations for the turbulent fluxes of scalars and momentum in incompressible flows are derived after time wise integration of the equation for the oscillating transported property, decomposing the turbulent fluxes in terms representing distinct features of the main and fluctuating flow that influence the respective turbulent tra
J. Aerosp. Technol. Manag.. Publicado em: 07/06/2018
-
9. Direct Numerical Simulation Code Validation for Compressible Shear Flows Using Linear Stability Theory
ABSTRACT: In order to simulate compressible shear flow stability and aeroacoustic problems, a numerical code must be able to capture how a baseflow behaves when submitted to small disturbances. If the disturbances are amplified, the flow is unstable. The linear stability theory (LST) provides a framework to obtain information about the growth rate in relatio
J. Aerosp. Technol. Manag.. Publicado em: 07/05/2018
-
10. Human dental pulp stem cell adhesion and detachment in polycaprolactone electrospun scaffolds under direct perfusion
Cell adhesion in three-dimensional scaffolds plays a key role in tissue development. However, stem cell behavior in electrospun scaffolds under perfusion is not fully understood. Thus, an investigation was made on the effect of flow rate and shear stress, adhesion time, and seeding density under direct perfusion in polycaprolactone electrospun scaffolds on h
Braz J Med Biol Res. Publicado em: 26/03/2018
-
11. Analog Models of Flanking Structures and a Natural Example in the Quadrilátero Ferrífero, Minas Gerais
ABSTRACT The aim of this study is to present analog models of flanking structures and to analyze the Fábrica Nova synform, Quadrilátero Ferrífero, Minas Gerais, from a geometric point of view. We set up seven models using a linear viscous silicone and produced flanking structures with a shear velocity of 2 cm h-1. At different initial orientations with re
An. Acad. Bras. Ciênc.. Publicado em: 31/07/2017
-
12. Two-dimensional Flow of Power-law Fluids over a Pair of Cylinders in a Side-by-Side Arrangement in the Laminar Regime
Abstract This manuscript presents the effect of Reynolds number (Re) and proximity of the bodies on the hydrodynamics of flow of shear-thinning, Newtonian and shear-thickening fluids over a pair of cylinders kept in side-by-side arrangement. Results obtained from the numerical simulations carried out with a combination of different parameters in the range of
Braz. J. Chem. Eng.. Publicado em: 2017-04