Shear Modulus
Mostrando 1-12 de 92 artigos, teses e dissertações.
-
1. EVALUATION OF POLY(VINYL ALCOHOL) ADDITION EFFECT ON NANOFIBRILLATED CELLULOSE FILMS CHARACTERISTICS
ABSTRACT In this study, based on the mechanical shear treatment, the cellulosic pulp was fibrillated in nanofibrils dispersed in aqueous suspension. Nanofibrillated Cellulose (NFC) matrix - Polyvinyl Alcohol (PVA) nanocomposite films’ were prepared by casting from NFC/PVA suspension mixtures. The thermal and mechanical properties of the obtained films were
CERNE. Publicado em: 2020-03
-
2. Number of laminae on the mechanical behavior of glued laminated timber (glulam) of Toona ciliata produced with vegetable polyurethane adhesive
RESUMO A madeira laminada colada (MLC) é um material compósito obtido a partir da colagem de lâminas de madeira dispostas com as fibras paralelas entre si. O objetivo deste trabalho foi avaliar a influência do número de lâminas no comportamento mecânico de MLC de Toona ciliata produzidas com adesivo poliuretano de base vegetal. As vigas de MLC foram p
Ciênc. agrotec.. Publicado em: 20/12/2019
-
3. Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites
Rigid particles have been incorporated into laminated composites, especially to enhance their bending performance attributed to the stiffening of the matrix phase (i) and the increased interlaminar shear resistance (ii). In order to better evaluate the improvement mechanism provided by the particulate inclusions, this work investigates the incorporation of m
Mat. Res.. Publicado em: 17/10/2019
-
4. The role of bondline thickness on mechanical properties of bio-based polyurethane
ABSTRACT Bio-based adhesives have been largely applied on several applications in many industrial areas, including automotive and laminated food packaging. Polyurethanes (PU) occupy a leading position among the most used bio-based polymers due to their large range of properties and application versatility. Recent works reported that PU obtained from castor o
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Physical-mechanical Properties of Plywood Produced With Acrocarpus fraxinifolius and Pinus oocarpa
ABSTRACT The present study has the objective of evaluating the physical-mechanical properties of plywood produced with Acrocarpus fraxinifolius wood, as well as the effect of combining their veneer with Pinus veneer. The wood of Acrocarpus fraxinifolius and Pinus oocarpa were used in the production of the panels. The plywood was produced with five veneers; t
Floresta Ambient.. Publicado em: 05/09/2019
-
6. Rheological properties of sweet potato starch-date syrup gel
Abstract Date syrup (DS), sugars (SG) and sweet potato starch (SPS) composites were investigated using dynamic rheometry, rapid visco-amylograph (RVA), and texture analysis (TPA). HPLC analysis revealed that DS sugar composition was 55% glucose and 45% fructose. Starch gels (0% to 50% DS or SG) were precooked in RVA. SPS starch gel is considered elastic beca
Food Sci. Technol. Publicado em: 22/07/2019
-
7. CHEMICALLY TREATED GLUED LAMINATED PARICÁ TIMBER (Schizolobium parahyba var. amazonicum)
ABSTRACT In the production of glue-laminated timber (GLT), boards derived from planted forest wood with easy workability are glued on top of one another. The main objective of the present work was to evaluate the performance of paricá timber GLT beams (5 × 10 cm) on GLT. Three procedures were performed: (1) GLT beams (5 × 10 cm) were produced using natura
Eng. Agríc.. Publicado em: 25/04/2019
-
8. Physical-mechanical properties of laminated bamboo panels
RESUMO O bambu é um material utilizado em escala global em diversas áreas. Contudo, necessita de aprimoramento nos processos para utilização industrial, no Brasil. A produção de painéis laminados colados está em crescimento no mundo e pode ser uma fonte de recursos para esse fim. Objetivou-se avaliar as propriedades físico-mecânicas de painéis lam
Pesqui. Agropecu. Trop.. Publicado em: 08/04/2019
-
9. Rheological properties of low-density polyethylene filled with hydrophobic Co(Ni)-Al layered double hydroxides
Abstract Cobalt/aluminum and nickel/aluminum layered double hydroxide (LDH - M+2:Al molar ratio of 3:1) were intercalated with dodecylsulphate (DDS), laurate (LAU), stearate (STE) and palmitate (PAL) and used as filler in low-density polyethylene (LDPE) in percentages between 0.2 and 7.0wt%. After injection molding, the samples were submitted to morphologic
Polímeros. Publicado em: 01/04/2019
-
10. Evaluation of the dispersion of carbon nanotubes in an elastomeric polyurethane and fatigue test
Abstract Two series of polyurethane (PU) and carbon nanotubes (CNT) based composites with 0.0, 0.25, 0.5 and 1.0 mass% of CNT were obtained from diluting a commercial masterbatch with 30 mass% CNT and using two different dispersion methods. The quality of the dispersions was assessed using optical microscopy, and scanning and transmission electron microscop
Polímeros. Publicado em: 18/03/2019
-
11. Stability, Mechanical Properties and Anisotropic Elastic Properties of GaxMgy Compounds
The stability, mechanical properties and anisotropic properties of sound velocities of Ga2Mg5, GaMg2, GaMg, O-Ga2Mg, H-Ga2Mg and Ga5Mg2 are investigated systematically by the first-principles calculation. The cohesive energy and formation enthalpy are obtained and used to estimate the stability of the Ga-Mg binary compounds. GaMg compound is the most stable
Mat. Res.. Publicado em: 18/02/2019
-
12. Investigating Hyperbolic Shear Deformation Theory on vibroacoustic behavior of the infinite Functionally Graded thick plate
Abstract This paper applies acoustic analysis of Sound Transmission Loss (STL) through infinite Functionally Graded (FG) thick plate employing Hyperbolic Shear Deformation Theory (HSDT). The procedure for applying a FG plate is followed by considering the material properties are changed continually based on power-law distribution of the materials in terms of
Lat. Am. j. solids struct.. Publicado em: 04/02/2019