Shear Wall
Mostrando 1-12 de 113 artigos, teses e dissertações.
-
1. Floors number influence on the instability parameter of reinforced concrete frame-braced buildings
Resumo Este trabalho investiga a influência do número de pavimentos no limite α1 do parâmetro de instabilidade de edifícios contraventados por pórticos de concreto armado; trata-se da seqüência de uma linha de estudos, na qual esta mesma questão foi investigada em edifícios contraventados por paredes e/ou núcleos. Inicialmente, mostra-se como a AB
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
2. New nonlinear solution of nearly incompressible hyperelastic FGM cylindrical shells with arbitrary variable thickness and non-uniform pressure based on perturbation theory
Abstract In this paper, nonlinear analysis of thick cylindrical shells with arbitrary variable thickness made of hyperelastic FGM with radially variation of material properties in nearly incompressible state under non-uniform pressure loading is presented. Thickness and pressure of the shell vary in axial direction by linear and/or nonlinear functions. The g
Lat. Am. j. solids struct.. Publicado em: 28/10/2019
-
3. Investigation of the effect of nozzle design on rheological bioprinting properties using computational fluid dynamics
ABSTRACT Bioprinting is the utilization of techniques derived from three-dimensional printing to generate complex biological structures which may replace natural tissues or organs. It employs high spatial resolution deposition of different cell types, growth factors and biomaterials. Those together form bioinks, which are the bioprinting inputs, analogously
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Human dental pulp stem cell adhesion and detachment in polycaprolactone electrospun scaffolds under direct perfusion
Cell adhesion in three-dimensional scaffolds plays a key role in tissue development. However, stem cell behavior in electrospun scaffolds under perfusion is not fully understood. Thus, an investigation was made on the effect of flow rate and shear stress, adhesion time, and seeding density under direct perfusion in polycaprolactone electrospun scaffolds on h
Braz J Med Biol Res. Publicado em: 26/03/2018
-
5. Wall function treatment for bubbly boundary layers at low void fractions
Abstract The present work investigates the role of different treatments of the lower boundary condition on the numerical prediction of bubbly flows. Two different wall function formulations are tested against experimental data obtained for bubbly boundary layers: (i) a new analytical solution derived through asymptotic techniques and (ii) the previous formul
An. Acad. Bras. Ciênc.. Publicado em: 2018-03
-
6. Experimental Multi-scale analysis of Carbon/Epoxy Composites Nano-Reinforced by Carbon Nanotubes/Multi-layer Graphene
Nano-size structures, nanotubes/multi-layer graphene (CNT/MLG), were dispersed into epoxy system by a combination of sonication and high shear mixing. To avoid CNT/MLG agglomeration, a non-covalent functionalization were performed using surfactants, CO890 - Polyoxyethylene (40) nonylphenyl ether and SDBS - sodium dodecyl benzene sulfonate. Raman spectroscopy
Mat. Res.. Publicado em: 22/01/2018
-
7. Production and characterization of nanocapsules encapsulated linalool by ionic gelation method using chitosan as wall material
Abstract Linalool has been extensively applied in various fields, such as flavoring agent, perfumes, cosmetics and medical science. However, linalool is unstable, volatile and readily oxidizable. A sensitive substance can be encapsulated in a capsule, so encapsulation technology can solve these problems. In this paper, linalool-loaded nanocapsules (Lin-nanoc
Food Sci. Technol. Publicado em: 25/05/2017
-
8. Numerical Analysis of Swirl Effects on Conical Diffuser Flows
ABSTRACT: The present paper focuses on the effect of swirl on important parameters of conical diffusers flows such as static pressure evolution, recirculation zones and wall shear stress. Governing equations are solved using a software based on the finite volume method. Moreover, turbulence effects are taken into account employing the k-ε RNG model with an
J. Aerosp. Technol. Manag.. Publicado em: 2017-03
-
9. Effect of alfalfa hay on growth performance, carcass characteristics, and meat quality of growing lambs with ad libitum access to total mixed rations
ABSTRACT Forty male Naemi lambs were used to evaluate the effect of total mixed rations (TMR) alone or in combination with supplementation of alfalfa hay offered at different schedules on growth, carcass characteristics, and meat quality. Lambs at the age of three months, with an average weight of 28.85±1.09 kg, were randomly selected and distributed into f
R. Bras. Zootec.. Publicado em: 2016-06
-
10. Three-Dimensional Finite Element Analysis of Compressive Behavior of Circular Steel Tube-Confined Concrete Stub Columns by New Confinement Relationships
Abstract This paper presents a nonlinear analysis of axially loaded steel tube-confined concrete (STCC) stub columns with new confinement relationships. For this aim, a 3-D finite element model of STCC columns using ABAQUS program is developed and validated against the experimental data. Proper material constitutive models are proposed and the confinement pa
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
11. Evaluation and comparison of behavior of corrugated steel plate shear walls
In this paper, the nonlinear behaviour of steel plate shear walls with corrugated plates under lateral pushover loading conditions in the models' top level has been analytically investigated by the finite element method. The one-storey frames have beams and columns as boundary elements. Steel plate shear walls are simulated using the finite element method, b
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
12. Flow visualization & extrudate swell behavior of natural rubber compound in annular die capillary rheometer
This research aims to study the flow pattern and extrudate swell properties of a Natural Rubber (NR) compound in a constant shear rate capillary rheometer, using two types of annular die: convergent annular and divergent annular. Results revealed that flow patterns that occurred in the barrels of both types of annular dies were significantly different, espec
Polímeros. Publicado em: 2014-08