Silicon Alloys
Mostrando 1-12 de 33 artigos, teses e dissertações.
-
1. Tensile and fatigue properties, machinability and machined surface roughness of Al-Si-Cu alloys
ABSTRACT In this paper, the aim was to determine if ASC91 (9 % Al, 1 % Cu) could be replaced with ASC73 (7 % Al, 3 % Cu) aluminium alloy, with presumably improved machinability due to lower silicon content (9 to 7 %) and retained mechanical properties due to a higher copper content (1 to 3 %). The test samples were excised from cylinder heads produced by the
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Análise comparativa entre a têmpera e partição versus a têmpera e revenimento para o aço SAE 4340
RESUMO Um novo tratamento térmico tem sido pesquisado recentemente, cuja denominação é têmpera e partição (T&P), com o intuito de criar aços com austenita estável em sua microestrutura. Inicialmente, esse tratamento foi realizado em aços de alto silício, não obstante, seu potencial alcança outros diversos materiais como os de baixa liga contendo
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Effect of Solidification Processing Parameters and Silicon Content on the Dendritic Spacing and Hardness in Hypoeutectic Al-Si Alloys
Aluminium with silicon as alloying element, form a class of material providing the most significant part of all material casting manufactured materials. These alloys have a wide range of applications in the automotive and aerospace industries. It is widely recognized that moderate addition of silicon to aluminum, significantly improves the resulting mechanic
Mat. Res.. Publicado em: 17/09/2018
-
4. Determinación de los parámetros de austenización intercrítica para el desarrollo de aceros multifásicos mediante análisis dilatométrico
ABSTRACT The Multiphase steels are materials with exceptional mechanical properties including high strength, excellent ductility and hardening coefficient and good conformability. These properties are related with the microstructure, which can be a combination of ferrite and martensite (Dual phase steels) or more complex microstructures with ferrite, bainite
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Influence of Si Coating on Interfacial Microstructure of Laser Joining of Titanium and Aluminium Alloys
A common phenomenon in the dissimilar joints is the presence of brittle compounds in the joining interface region. The brittle phases can decrease by introduction of interlayers in the joining interface, such as silicon, that inhibits the formation of Al3Ti and AlTi3 phases in joining process between titanium and aluminium alloys. In the present work, the jo
Mat. Res.. Publicado em: 09/11/2017
-
6. Study of Ti-7.5Si-22.5B alloys produced by powder metallurgy
Refractory alloys with silicides and borides have been used in high temperature applications because their elevated melting point, good oxidation resistance and high strength-to-weight ratio. The present study approaches the preparation of Ti-7.5Si-22.5B (at.-%) alloys through high-energy ball milling and sintering. The powders and compacts obtained in these
Mat. Res.. Publicado em: 03/06/2014
-
7. Efeito da modificação com estrôncio na microestrutura e nas propriedades mecânicas da liga 356 / Effect of strontium on the microstructure and mechanical properties alloys 356
The properties of aluminum-silicon alloys are strongly dependent on the casting process used, the chemical additions made to control eutectic structure, primary silicon and grain structure, and molten metal treatment to reduce hydrogen gas content and to remove inclusions. Modification treatments transform the flake eutectic silicon into a fibrous form produ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
8. On Ti-18Si-6B and Ti-7.5Si-22.5B powder alloys prepared by high-energy ball milling and sintering
Recently, a new ternary phase was discovered in the Ti-Si-B system, located near the Ti6Si2B composition. The present study concerns the preparation of titanium alloys that contain such phase mixed with α-titanium and other intermetallic phases. High-purity powders were initially processed in a planetary ball-mill under argon atmosphere with Ti-18Si-6B and
Mat. Res.. Publicado em: 09/10/2012
-
9. Interdiffusion studies on hot rolled U-10Mo/AA1050
The U-Mo alloys are investigated with the goal to become nuclear material to fabricate high-density fuel elements for high performance research reactors. The enrichment level (20% 235U) suggests that the U-Mo alloys should be between 6 to 10 wt. (%), which can reach up to 9 gU.cm-3 in fuel density. Nevertheless, the U-Mo alloys are very reactive with Al. Int
Mat. Res.. Publicado em: 02/10/2012
-
10. Study of the Al-Si-X system by different cooling rates and heat treatment
The solidification behavior of the Al-12.6% Si (A1), the hypereutectic Al-20%Si (A2) and the Al-20%Si-1.5% Fe-0.5%Mn (A3) (in wt. (%)) alloys, at different cooling rates is reported and discussed. The cooling rates ranged between 0.93 °C/s and 190 °C/s when cast in sand and copper wedge-shaped molds, respectively. A spheroidization heat treatment was carri
Mat. Res.. Publicado em: 30/08/2012
-
11. Performance of single wire earth return transformers with amorphous alloy core in a rural electric energy distribution system
In this paper are presented some considerations about the performance of single wire earth return amorphous alloy core transformers in comparison with conventional silicon steel sheets cores transformers used in rural electric energy distribution network. It has been recognized that amorphous metal core transformers improve electrical power distribution effi
Mat. Res.. Publicado em: 08/05/2012
-
12. Microstructural characterization of as-cast hf-b alloys
An accurate knowledge of several metal-boron phase diagrams is important to evaluation of higher order systems such as metal-silicon-boron ternaries. The refinement and reassessment of phase diagram data is a continuous work, thus the reevaluation of metal-boron systems provides the possibility to confirm previous data from an investigation using higher puri
Materials Research. Publicado em: 14/02/2012