Sisal Fibers
Mostrando 1-12 de 41 artigos, teses e dissertações.
-
1. Estudo das propriedades de concretos com adição de fibras vegetais e de polipropileno para uso em paredes estruturais
RESUMO Estudou-se neste trabalho as propriedades de concretos com adição de fibras vegetais (sisal e rami) e de polipropileno para uso em paredes estruturais. Realizou-se uma comparação do desempenho do concreto com a adição de fibras vegetais e de fibra de polipropileno, a fim de se verificar a possível substituição. Foram avaliadas a retração po
Matéria (Rio J.). Publicado em: 10/06/2019
-
2. Study of epoxy composites and sisal fibers as reinforcement of reinforced concrete structure
Resumo A aplicação de reforço estrutural tem apresentado crescimento significativo nos dias atuais. O desenvolvimento de novos materiais para tal finalidade tem despertado o interesse de muitos pesquisadores. O presente trabalho teve por objetivo avaliar a viabilidade técnica da produção e aplicação de polímeros reforçados com fibras vegetais (PRFV
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
3. Mechanical behavior and water absorption in sisal/glass hybrid composites
ABSTRACT This study aimed to assess the effect of hybridization on thermomechanical properties and water absorption of composite materials, by introducing sisal fiber tissue into the material. To that end, two composite material plates were manufactured, the first with five layers of E-glass reinforcement mat and the second with three layers of E-glass fiber
Matéria (Rio J.). Publicado em: 06/12/2018
-
4. Weibull analysis of tensile tested piassava fibers with different diameters
ABSTRACT Environmental considerations in addition to technical, economical and societal benefits are increasingly promoting the substitution of natural fibers for glass fiber in polymer matrix composites. However, natural fibers are heterogeneous in their dimensions, specially the cross section, which plays an important role in their mechanical strength. It
Matéria (Rio J.). Publicado em: 06/12/2018
-
5. Ballistic Efficiency of Multilayered Armor Systems with Sisal Fiber Polyester Composites
The urban violence and the different types of global armed conflicts demand efficient protective systems against high energy ammunition. Multilayered Armor Systems (MAS) provide efficient protection by making use of lighter and more efficient materials. A typical MAS may be composed of three layers: a front ceramic followed by a composite, backed by a ductil
Mat. Res.. Publicado em: 15/01/2018
-
6. Gamma radiation effect on sisal / polyurethane composites without coupling agents
Abstract Natural fibers and polyurethane based composites may present chemical bonding between the components of the polymer and the lignin of the fiber. The incidence of radiation can cause degradation of the polymeric material and alter its mechanical properties. The objective of this study was to obtain and characterize cold pressed composites from polyur
Polímeros. Publicado em: 29/06/2017
-
7. Use of green composites for manufacturing small boats in the Amazon: numerical and experimental evaluations
ABSTRACT The Amazon has a great potential of natural resources. There is a wide diversity of plant specimens and many of them can be extracted and processed such as jute, sisal and mauve fibers. It is known that usualy small communities from Amazon build their boats using a rudimentary and ecologically incorrect method, which comes from brazilian natives. Th
Matéria (Rio J.). Publicado em: 01/06/2017
-
8. Polyhydroxybutyrate Composites with Random Mats of Sisal and Coconut Fibers
Biodegradable polymeric composites using natural fibers have been investigated aiming to mitigate environmental impacts. In this paper, polyhydroxybutyrate (PHB) composites obtained using random mats of sisal and coconut fibers by compression molding in a hydraulic press, and the fiber content varied between 10% and 15% relative to the weight of the polymer.
Mat. Res.. Publicado em: 22/12/2016
-
9. Coir and Sisal Fibers as Fillers in the Production of Eucalyptus Medium Density Particleboards - MDP
The aim of this study was to evaluate the potential use of sisal and coir fibers in combination with Eucalyptus particles for the production of particleboard. The particleboards were produced in three layers. The first and third layers (face) were made with small Eucalyptus particles. The second layer (core) was made with big Eucalyptus particles in combinat
Mat. Res.. Publicado em: 20/10/2016
-
10. Ballistic Efficiency of an Individual Epoxy Composite Reinforced with Sisal Fibers in Multilayered Armor
Sisal fibers are among the natural lignocellulosic ones with great impact resistance for potential use in polymer composites. This work evaluates the ballistic efficiency of the distinct individual components of a multilayered armor. These include the front ceramic, the back metallic sheet and the intermediate layer as either the conventional aramid fabric o
Mat. Res.. Publicado em: 23/10/2015
-
11. Melt processing of polymer biocomposites
A coupled device extruder and injection moulding were used to prepare biocomposites in order to provide a continuous and large-scale production, and overcome the fiber degradation inside the extruder. Two types of biocomposites were prepared, Sisal/poly(buthylene adipate-co-terephthlate) – PBAT and Juta/poly(lactide acid)/poly(buthylene adipate-co-terephth
Polímeros. Publicado em: 2015-04
-
12. On the Strengthening of Cement Mortar by Natural Fibers
The purpose of this work is to evaluate mechanical behavior of sisal fiber reinforced cement mortar. The composite material was produced from a mixture of sand, cement and water. Sisal fibers were added to the mixture in two different lengths. Mechanical characterization of the composite and the plain mortar was carried out using three point bend, compressio
Mat. Res.. Publicado em: 2015-02