Software Layer
Mostrando 1-12 de 90 artigos, teses e dissertações.
-
1. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
2. A New Miniaturized Low-Profile and Stable Dual-Band FSS with 2.5D Structure for ISM Bands
Abstract Based on 2.5-Dimensional (2.5D) frequency selective surface (FSS) structures, a new miniaturized frequency selective surface structure is proposed in this work to operate as a bandreject filter in the 2.4 GHz (2400 to 2483.5 MHz) and 5 GHz (5150 to 5350 MHz and 5470 to 5725 MHz) ISM (Industrial, Scientific, and Medical) bands. The FSS has the metall
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. SELECTION OF EFFECTIVE SOFTWARE FOR THE ANALYSIS OF THE FRACTIONAL COMPOSITION OF THE CHAOTIC SEED LAYER USING THE EXAMPLE OF OILSEED RADISH
ABSTRACT This article generalises the peculiarities and efficiency of the use of three software packages, Digimizer image analysis software (v. 4.2), ImageJ2 version 2.0.0-rc-64 and WipFrag 3.3.14.0. These packages were used in studying the fractional composition of oilseed radish seeds for scanning in the mode of single-layer inseparable placement. The gene
Eng. Agríc.. Publicado em: 2021-04
-
4. Numerical and experimental evaluation of the thermally stratified atmospheric boundary layer in wind tunnels
Abstract The atmospheric boundary layer (ABL) flow occurs due to the interaction between the Earth’s surface and atmosphere, and it usually happens under thermal stratification. Therefore, in order to emulate this phenomenon, atmospheric wind tunnels need appropriate devices, such as spires and cubical roughness elements, at the entrance of the wind tunnel
REM, Int. Eng. J.. Publicado em: 2021-01
-
5. Flexible pavement overlay design of UFJF ring road based on the new Brazilian mechanistic-empirical pavement design method
Abstract The procedures for design and reinforcement projects regarding flexible pavements available in Brazil are mostly based on empirical models developed from studies carried out in specific localities, and therefore, should only be used in cases where equivalent climatic and traffic conditions are observed. The national highway agencies in partnership w
REM, Int. Eng. J.. Publicado em: 2020-12
-
6. Synthesis and Mechanical Reconfiguration of Ground Plane Tilted Microstrip Antennas Based on Tetra-Circle Fractals
Abstract A synthesis procedure of a mechanically reconfigurable antenna based on tetra-circle fractal patch elements is presented, enabling to change both resonant frequencies and radiation pattern performance. The antenna geometry reconfiguration is implemented by tilting the ground plane of the microstrip antenna with respect to the fractal patch and subst
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
7. Effect of panretinal photocoagulation on the peripapillary retinal nerve fiber layer in diabetic retinopathy patients
OBJECTIVES: To determine the effect of panretinal photocoagulation (PRP) on the peripapillary retinal nerve fiber layer (RNFL) in nonglaucomatous patients with proliferative diabetic retinopathy (PDR). METHODS: This is a prospective, single center, observational study. Thirty-eight eyes of 26 diabetic patients underwent PRP for proliferative diabetic retin
Clinics. Publicado em: 25/11/2019
-
8. Avaliação do ciclo de vida da coleta seletiva de papel e papelão no núcleo do Bessa, município de João Pessoa (PB), Brasil
RESUMO Reconhecendo que o papel e o papelão são os materiais mais identificados na gestão dos resíduos sólidos domiciliares (RSD), o objetivo deste artigo foi aplicar a metodologia da Avaliação de Ciclo de Vida (ACV) aos procedimentos de coleta seletiva desses materiais em um núcleo de João Pessoa (PB). A ACV quantifica as cargas ambientais ao longo
Eng. Sanit. Ambient.. Publicado em: 25/11/2019
-
9. Three-Dimensional Reciprocal Invisibility Cloak with Multilayered Structure
Abstract We investigate a three-dimensional (3D) reciprocal invisibility cloak with a multilayered structure based on coordinate transformation theory and complementary media. There has been considerable research on invisibility cloaks such as the external cloak, which requires complex “anti-objects”, and closed cloaks of different shapes, in which the o
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
10. Influence of ceramic material, thickness of restoration and cement layer on stress distribution of occlusal veneers
Abstract The aim of this study was to evaluate stress distribution in an occlusal veneer according to the restorative material, restoration thickness, and cement layer thickness. A tridimensional model of a human maxillary first molar with an occlusal veneer preparation was constructed using a modeling software of finite element analysis. The model was repli
Braz. oral res.. Publicado em: 29/11/2018
-
11. Gamma Ray and FTIR Studies in Zinc Doped Lead Borate Glasses for Radiation Shielding Application
Gamma ray shielding properties of borate glass samples containing oxides of lead and zinc are prepared by melt and quench technique and evaluated theoretically using XCOM computer software for gamma ray shielding properties. However, gamma ray shielding properties are discussed in terms of various calculated parameters such as half value layer, mean free pat
Mat. Res.. Publicado em: 14/11/2018
-
12. Surface Integrity Analisys in the Hard Turning of Cemented Steel AISI 4317
This work was based on the surface integrity analysis of hardened steel, AISI 4317 case carburized, quenched and tempered with 58 HRC, obtained by a turning operation executed with CBN (cubic boron nitride) tool, varying three basic cutting parameters (cutting speed, feed rate and cutting depth). The surface integrity characterization was conducted analyzing
Mat. Res.. Publicado em: 26/07/2018