Solid Fuel
Mostrando 1-12 de 117 artigos, teses e dissertações.
-
1. Lignocellulosic Residues from the Brazilian Juice Processing Industry as Novel Sustainable Sources for Bioenergy Production: Preliminary Assessment Using Physicochemical Characteristics
This work aims to investigate the energy-related characteristics of apple bagasse, orange bagasse and cashew-apple bagasse to identify their potential as bioenergy feedstocks. For this, a detailed characterization was performed, including proximate analysis, ultimate analysis, atomic molar ratio, heating values, chemical composition, bulk density, bioenergy
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
2. KINETIC STUDIES OF HYDROLYSIS REACTION OF NaBH4 WITH γ-Al2O3 NANOPARTICLES AS CATALYST PROMOTER AND CoCl2 AS CATALYST
Abstract Solid-state hydrogen storage is of considerable concern as a potential hydrogen source for portable fuel cell applications. This study mainly focuses on kinetics of NaBH4/Al2O3 nanoparticles (20 nm)/H2O system with CoCl2 as catalyst and the factors that affect the hydrogen generation rate (HGR). It is observed that the reaction rate increases consid
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
3. CONVERSION OF SPENT FAT OIL INTO LIQUID AND GASEOUS FUELS THROUGH CLINKER CATALYZED PYROLYSIS
Abstract Repeated heating of fat oil may result in the formation of highly toxic aldehyde compounds. The oils having such compounds are considered as health hazards and therefore their repeated use is banned in many countries. Since huge quantities of the used oil need urgent disposal, this work is focused on the disposal of used oil for the resource recover
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
4. Operational and energy performance of the tractor-scarifier assembly: Tires, ballasting and soil cover
RESUMO A altura das garras do pneu, o lastro do trator e a cobertura do solo podem influenciar o desempenho operacional e energético do conjunto trator-escarificador. O objetivo deste estudo foi analisar o desempenho operacional e energético do conjunto trator-escarificador, em função da altura das garras do pneu, do lastro e da superfície de rolamento.
Rev. bras. eng. agríc. ambient.. Publicado em: 09/09/2019
-
5. Evaluation of Biomass Properties for the Production of Solid Biofuels
ABSTRACT The efficient use of biomass as fuel requires prior knowledge of the composition and properties of the material in order to be able to develop technologies for its efficient combustion while ensuring that emissions of pollutants remain within acceptable limits. Therefore, the analysis of the physical and chemical properties of these materials is ess
Floresta Ambient.. Publicado em: 05/09/2019
-
6. Exposição ao uso da lenha para cocção no Brasil e sua relação com os agravos à saúde da população
Resumo A poluição do ar em ambientes fechados é agravada pela queima de lenha em fogões rústicos e ambientes pouco ventilados. A exposição aos poluentes emitidos por este tipo de combustível resulta no aumento da morbidade e da mortalidade. No Brasil, os estudos e as estimativas são escassos. Visando entender esta problemática, o objetivo deste tra
Ciênc. saúde coletiva. Publicado em: 05/08/2019
-
7. Influence of Yttria-Stabilized Zirconia on Microstructure and Electrical Properties of Doped Lanthanum Gallate
Lanthanum gallate with partial substitutions for strontium and magnesium shows higher ionic conductivity than traditional ionic conductors such as yttria-stabilized zirconia (8YSZ), and has been considered for application as solid electrolyte and electrode in Solid Oxide Fuel Cells operating at intermediate temperatures (500-700ºC). Parallel to the developm
Mat. Res.. Publicado em: 01/08/2019
-
8. Effect of blisters and rims on radial hydride precipitation in fuel elements under dry storage conditions
ABSTRACT Hydrogen enters in Zry clads during fuel element life in service; when hydrogen exceeds the terminal solid solubility, circumferential hydrides are precipitated. In the presence of thermal gradients, produced for instance by oxide spallation, localized concentration of hydrides - known as blisters - can be formed. Due to the fact that zirconium hydr
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Study of NiO-GDC material produced by aqueous tape casting
ABSTRACT Studies have been developed in last decades in order to produce NiO-based material to be used as anode in solid oxide fuel cell (SOFC). Aqueous-based tape casting was used to produce NiO-GDC substrates with smooth and homogeneous surfaces and good flexibility. Physical and mechanical properties were obtained in green tapes sintered at temperatures r
Matéria (Rio J.). Publicado em: 08/01/2018
-
10. Synthesis of the Perovskite-Type BaCe0.8Pr0.05Cu0.15O3-δ via EDTA-Citrate
BaCeO3-based ceramics are ionic and electronic conductors that can be applied to oxygen sensors, solid oxide fuel cells and oxygen permeable membranes. However, the low chemical stability at high temperatures of these materials motivates studies involving doping of A and/or B sites of the perovskite structure. In this context, the present work aimed to synth
Mat. Res.. Publicado em: 06/11/2017
-
11. Effect of Urea Excess on the Properties of the MgAl2O4 Obtained by Microwave-Assisted Combustion
In this paper, magnesium aluminate spinels were prepared by microwave-assisted combustion, using urea as fuel. In order to evaluate the effect of the urea excess used in the synthesis, its mass was added in a range of 1.0 to 2.5 times the stoichiometric amount required. The materials produced were characterized by TGA, FTIR, XRF, XRD, BET, SEM and TEM. The r
Mat. Res.. Publicado em: 23/10/2017
-
12. Optimization of spin-coated electrodes for electrolyte-supported solid oxide fuel cells
ABSTRACT Electrodes for electrolyte-supported solid oxide fuel cells (SOFC's) were fabricated by spin coating. Strontium-doped lanthanum manganite (LSM) cathode and nickel yttria-stabilized zirconia cermet anodes were synthesized and processed for enhanced deposition conditions. The influence of electrode microstructural parameters was investigated by a syst
Matéria (Rio J.). Publicado em: 22/05/2017