Spincoating
Mostrando 1-12 de 35 artigos, teses e dissertações.
-
1. Systems developed for application as self-cleaning surfaces and/or antimicrobial properties: a short review on materials and production methods
Resumo Esta minirrevisão apresenta materiais e técnicas que têm sido utilizados para a produção de superfícies autolimpantes e/ou antimicrobianas. A partir dos trabalhos analisados constatou-se grande utilização do dióxido de titânio para se obter superfícies com essas propriedades, porém materiais como sílica, zinco e prata também têm sido ut
Cerâmica. Publicado em: 15/08/2019
-
2. Analysis of substrate coverage of hybrid halide perovskite thin films deposited on glass
ABSTRACT In this work we have studied coverage characteristics of organo-metal lead halide perovskite thin films deposited through the spin-coating technique onto glass substrates that were subjected to different predeposition treatments. Samples were deposited at room temperature using different spinning speeds and two different solvents, namely, dimethylfo
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Effect of solvents on the morphology of PMMA films fabricated by spin-coating
Abstract A method to produce thin layer of PMMA (poly (methyl methacrylate) films by spin coating is reported. PMMA is dissolved in xylene, a mixture of MIBK-xylene and chloroform. Varying the PMMA concentration and spin-coating speeds controls the thickness of the PMMA films. Using chloroform as solvent evidenced thickness around 10 μm. This thickness is s
Polímeros. Publicado em: 21/09/2017
-
4. Optical and Electrical Properties of (002)-Oriented ZnO Films Prepared on Amorphous Substrates by Sol-Gel Spin-Coating
Zinc oxide (ZnO) films were prepared on amorphous quartz substrates by sol-gel spin-coating using Zn(CH3COO)2•2H2O precursor. Isopropanol, ethanol and 2-methoxyethanol were used as solvents. The film drying temperature was kept constant at 200 ºC and the annealing temperature was varied from 400 to 800 ºC. Highly transparent and (002)-oriented hexagonal
Mat. Res.. Publicado em: 19/12/2016
-
5. Nano and Micro Ceramic Membranes from Degradable Templates
Abstract The nano/microstructures with highly porous surface area have attracted tremendous attention, particularly the synthesis and tailoring of porous and hollow materials of high performance. In this paper, an easy method of cost-effective synthesis of hollow ceramic fiber membranes based on Hydroxyapatite, TiO2 and ZrO2 stabilized with Yttrium, is propo
Mat. Res.. Publicado em: 28/07/2016
-
6. NIR Luminescence from Sol-Gel Er3+ Doped SiO2:GeO2 Transparent Gels, Nanostructured Powders and Thin Films for Photonic Applications
Samples of (1 – x)SiO2:xGeO2 compositions, containing x = 10 and 20, and doped with Er3+, were prepared by a simple sol-gel route. Homogeneous and transparent gels were synthesized and xerogels were obtained by gel annealing from 700 ºC to 1100 ºC. Films exhibiting high transmittance in the visible and near infrared were deposited by spin-coating techniq
J. Braz. Chem. Soc.. Publicado em: 2015-12
-
7. Desenvolvimento e testes de células a combustível suportadas pelo anodo com eletrólitos depositados por spin-coating
No presente estudo são apresentados os desenvolvimentos de células suportadas pelo anodo usando os materiais convencionais, à base de zircônia estabilizada com ítria (ZEI) e NiO, e técnicas químicas de síntese e de deposição de camadas dos demais componentes: camada funcional, eletrólito e catodo. Os eletrodos foram sintetizados no Instituto de Pe
Matéria (Rio J.). Publicado em: 2013
-
8. Effect of plasma fluorination variables on the deposition and growth of partially fluorinated polymer over PMMA films
In this work, an investigation was made of the modification of film surface of Poly(methylmethacrylate) (PMMA) using the plasma polymerization technique. PMMA films 10 µm thick were obtained by Spin-Coating starting from a chloroform solution (15.36% w/w). The films were exposed to the plasma of CHF3 at different gas pressures and exposure times to increase
Polímeros. Publicado em: 2013
-
9. Desenvolvimento de microcantilever funcionalizado com polímero condutor para a detecção de compostos orgânicos voláteis e umidade relativa
The great interest to develop microcantilevers sensors is due to several desirable properties, in particular the ability to adjust the size and structure, thus increasing the perspectives for the construction of new sensor systems. In this work, we developed functionalized microcantilever sensors with conducting polymers to detect relative humidity, volatile
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/05/2012
-
10. Construção de sensores eletroquímicos utilizando como matriz materiais cerâmicos SI O IND. 2 / M IND. X O IND. Y , e materiais cerâmicos eletricamento condutores SI O IND. 2 / C/ M IND. X O IND. Y , preparados pelo processo sol-gel / Construction of electrochemical sensors using ceramic materials SI O IND. 2 / M IND. X O IND. Y and electrically conducting ceramic materials SI O IND. 2 /C/ M IND. X O IND. Y as matrix, prepared for the sol-gel process
This work describes the synthesis and characterization of three different materials: SiO2/SnO2, SiO2/SnO2/Sb2O5 and the film of Nb2O5 formed on the surface of the ceramic material SiO2/C obtained by sol-gel process and to use them as matrix in the development of electrochemical sensors. The mixed oxides, SiO2/SnO2, were synthesized using as source of SnO2, S
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/04/2012
-
11. Método solvotérmico assistido por micro-ondas aplicado à obtenção de nanocristais de ITO : deposição e caracterização de filmes de ITO
Utilizando um forno micro-ondas doméstico adaptado como fonte de energia, estudou-se a formação de nanocristais de In1-xSnxO2 (ITO) por meio da conversão de energia radiante em térmica. O pó do material foi formado em uma temperatura de 200 C por tempo de 30 minutos, a razão de aquecimento do sistema foi de 50 C/min. Os pós obtidos por esse método f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/02/2012
-
12. Construção de células solares sensibilizadas por corante a partir de nanoestruturas de ZnO obtidas por método hidrotermal / Construction of dye-sensitized solar cells from Nanostructures ZnO obtained by Method Hidroterma
The Photovoltaic (PV) sector has been facing an accelerated development rate within the last decade, which is comparable to the other renewable energy sources, according to the data released by the International Energy Agency (IEA). Therefore, a myriad of R&D activities and technological innovations are under way in order to cut down the manufacturing cost o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/08/2011