Stability Boundary
Mostrando 1-12 de 92 artigos, teses e dissertações.
-
1. Fuzzy Boundary for Beams Vibrations in Vehicles
ABSTRACT This work aims to study the transversal motion of a car’s chassis, modeled by a beam and supported at its ends by two sets of spring-damper elements. A finite differences method is utilized along with Robin boundary conditions to solve the mathematical modeling. The constants of the boundary conditions are modeled by a fuzzy parameter obtained thr
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
2. Effect of Pressure Gradient on the Development of Görtler Vortices
ABSTRACT: Boundary layers over concave surfaces may become unstable due to centrifugal instability that manifests itself as stationary streamwise counter rotating vortices. The centrifugal instability mechanism in boundary layers has been extensively studied and there is a large number of publications addressing different aspects of this problem. The results
J. Aerosp. Technol. Manag.. Publicado em: 24/10/2019
-
3. Boundary line approach applied among crop emergence parameters and soil physical properties
RESUMO A técnica “boundary line” foi proposta para interpretar dados biológicos, onde uma variável é uma resposta biológica e a outra uma variável independente. O objetivo do trabalho foi correlacionar parâmetros de emergência de milho e soja com propriedades físicas da cama de semeadura do solo aplicando o procedimento “boundary line”. O es
Rev. bras. eng. agríc. ambient.. Publicado em: 01/07/2019
-
4. Simulação termodinâmica computacional de liga modelo de aço super ferrítico contendo 0,07% de boro
RESUMO Aços inoxidáveis super ferríticos são utilizados em equipamentos como trocadores de calor e torres de destilação que operam em condições extremas de temperatura, pressão e em ambientes contendo altas concentrações de cloretos, H2S e CO2, encontradas nas novas áreas de exploração de petróleo e gás na costa brasileira. Uma liga super fer
Matéria (Rio J.). Publicado em: 20/05/2019
-
5. Investigating the Effect of Delamination Size, Stacking Sequences and Boundary Conditions on The Vibration Properties of Carbon Fiber Reinforced Polymer Composite
Abstract Composite structures are extensively used in various fields ranging from, but not limited to marine, aerospace, automotive, agricultural and industrial equipment due to their unique and excellent properties like weight associated with density. On an increase in their applications, it also requires special attention to manufacture and process the com
Mat. Res.. Publicado em: 07/01/2019
-
6. Estabilidad térmica de aleaciones de magnesio Procesadas por Friccion-Agitación (FSP)
ABSTRACT Superplasticity is defined by an extended plastic deformation previous to fracture, generally at high temperatures. In the mode of fine structures superplasticity, grain boundary sliding is the controlling mechanism. To achieve this fine grained structure it could be used any Severe Plastic Deformation (SPD) process like Friction Stir Processing (FS
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Effect of Loose Bonding and Corrugated Boundary Surface on Propagation of Rayleigh-Type Wave
Abstract The problems concerns to the propagation of surface wave propagation through various anisotropic mediums with initial stress and irregular boundaries are of great interest to seismologists, due to their applications towards the stability of the medium. The present paper deals with the propagation of Rayleigh-type wave in a corrugated fibre-reinforc
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
8. LINEAR STABILITY ANALYSIS AND CFD SIMULATION OF DOUBLE-LAYER RAYLEIGH-BÉNARD CONVECTION
Abstract Natural convection in superimposed layers of fluids heated from below is commonly observed in many industrial and natural situations, such as crystal growth, co-extrusion processes and atmospheric flow. The stability analysis of this system reveals a complex dynamic behavior, including the potential multiplicity of stationary states and occurrence o
Braz. J. Chem. Eng.. Publicado em: 2016-09
-
9. Subcritical Hopf Equilibrium Points in the Boundary of the Stability Region
RESUMO Uma caracterização completa da fronteira da região de estabilidade de umaclasse de sistemas dinâmicos autônomos não lineares é desenvolvida admitindo a existência de pontos de equilíbrio não-hiperbólicos do tipo Hopf Subcríticos na fronteira da região de estabilidade. A caracterização da região de estabilidade neste trabalho é uma ext
TEMA (São Carlos). Publicado em: 2016-08
-
10. Effect of Uniformly Distributed Tangential Follower Force on the Stability of Rotating Cantilever Tube Conveying Fluid
Abstract In this paper, the Euler-Bernoulli beam model is used to predict the structural instability of rotating cantilever tubes conveying fluid and subjected to uniform distributed tangential compressive load. The governing equation of motion and boundary conditions of the system are derived using the Hamilton's principle. Then, Galerkin method is applied
Lat. Am. j. solids struct.. Publicado em: 2016-02
-
11. Numerical Study of the b-Ξ Flame Wrinkling Combustion Model in Oracles Test Rig
ABSTRACT: Numerical modeling of premixed combustion is important for a wide range of machines and systems focusing on compliance with the increasing pollutants reduction requirements. However good industrial numerical combustion models need a practical requiring, in this way, a balance between speed and accuracy. The flamelet models are suitable for this pur
J. Aerosp. Technol. Manag.. Publicado em: 2015-12
-
12. ONDAS DE MONTAÑA EN LA CAPA LÍMITE PLANETARIA DE LA REGIÓN ANDINA VENEZOLANA
Dynamic and thermodynamic conditions of the planetary boundary layer of the Venezuelan Andean region for the generation of mountain waves are evaluated. The Froude number is calculated by relating the static stability in the presence of orographic supported vertical wind profiles, diagrams and thermodynamic analysis of satellite images. It is found that when
Rev. bras. meteorol.. Publicado em: 2015-09