Stress Strain Relationship
Mostrando 1-12 de 42 artigos, teses e dissertações.
-
1. Interfacial bond-slip relationship between Carbon Fiber Reinforced Polymer Plate and Concrete after High Temperature of Asphalt Paving Construction
Abstract The bond-slip relationship of Carbon Fiber Reinforced Polymer (CFRP) plate-concrete after the influence of high temperature action of Stone Mastic Asphalt (SMA) paving was investigated in this article. Two groups of double shear specimens with different bonding length were designed and tested. Based on the test results, the failure modes of specimen
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
2. Uma abordagem experimental e numérica para determinação de curvas de compressão para concreto simples e reforçados com fibras de aço
RESUMO A curva tensão-deformação do concreto é importante para o dimensionamento de estruturas, pois por meio dela é possível obter sua resistência à compressão, sua deformação de pico, o módulo de elasticidade e a tenacidade do concreto. Entretanto, essa é uma propriedade que não é comumente determinada nos ensaios de controle de qualidade do
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Nonlinear analysis of shape memory alloy beam under the thermal and the mechanical loads
ABSTRACT In this paper, the tension-compression asymmetry of shape memory alloys (SMA), subjected to the thermal and the mechanical loads, is sufficiently explored. Taking a basis of stress-strain relationship and a concern for critical phase transformation, a new simple model of mechanics is established. Through the deflection lines under different load con
Matéria (Rio J.). Publicado em: 20/05/2019
-
4. Two-Dimensional Numerical Model of the Fracture Process in Steel Fibre Reinforced Concrete with the Continuum Strong Discontinuity Approach and Functional Data Analysis
Abstract This paper presents the formulation of a two-dimensional numeri-cal model able to describe the fracture process in structural mem-bers of steel fibre reinforced concrete (SFRC) from the volume ratio of the fibres and the mechanical properties of the compo-nents: a concrete matrix and a set of steel fibres with a random orientation. The relationship
Lat. Am. j. solids struct.. Publicado em: 08/04/2019
-
5. Mechanical characterization of PM aluminum composites by small punch test
ABSTRACT In this work Small Punch Test (SPT) was applied to study the mechanical behavior of ultrafine-grained Al-Al2O3metal matrix composites (MMCs) fabricated in situ via powder metallurgy route (HITEMAL®). Such MMCs show attractive mechanical properties, enhanced creep performance and increased thermal stability at elevated temperatures, not normally ass
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Study on Dynamic Compressive Mechanical Properties and Failure Modes of Heat-Treated Granite
Abstract Temperature and external load are two important factors affecting the mechanical properties of rock material. The test on heat- treated granite specimen was carried out by using an improved split Hopkinson pressure bar (SHPB). Based on the test data, the dynamic behavior and failure characteristics of the granite under the coupling action of tempera
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
7. Superelasticity in Polycrystalline Ni-Mn-Ga-Fe Microwires Fabricated by Melt-extraction
Ni48Mn26.4Ga19.7Fe5.9 microwires with grain size of 1-3 micron were successfully fabricated by melt-extraction. The superelastic effects in the microwires under various temperatures and loads were systematically demonstrated. The as-extracted microwires displayed partial superelasticity when attended at relatively high temperature. The critical stress for st
Mat. Res.. Publicado em: 23/10/2015
-
8. Thermal and mechanical properties of commercial MgO-C bricks
abstractMgO-C (magnesia-carbon) refractories are widely used in several steelmaking linings. These refractories are exposed to extreme stress due to high temperatures (T > 1600 °C) required to cause the metallurgical reactions. These working conditions produced refractory wear through various related processes. The different types of degradation that the ma
Matéria (Rio J.). Publicado em: 2015-09
-
9. Differential susceptibility of BALB/c, C57BL/6N, and CF1 mice to photoperiod changes
Objective:Circadian disturbances common to modern lifestyles have been associated with mood disorders. Animal models that mimic such rhythm disturbances are useful in translational research to explore factors contributing to depressive disorders. This study aimed to verify the susceptibility of BALB/c, C57BL/6N, and CF1 mice to photoperiod changes.Methods:Th
Rev. Bras. Psiquiatr.. Publicado em: 24/03/2015
-
10. A characterization for the constitutive relationships of 42CrMo high strength steel by Artificial Neural Network and its application in isothermal deformation
In hot working process, the prediction of material constitutive relationship can improve the optimization design process. Recently, the artificial neural network models are considered as a powerful tool to describe the elevated temperature deformation behavior of materials. Based on the experimental data from the isothermal compressions of 42CrMo high streng
Mat. Res.. Publicado em: 05/08/2014
-
11. The flow behavior modeling of as-extruded 3Cr20Ni10W2 austenitic heat-resistant alloy at elevated temperatures considering the effect of strain
In order to investigate the compressive deformation behavior of 3Cr20Ni10W2 alloy, a series of isothermal upsetting experiments were carried out in the temperature range of 1203-1403 K and strain rate range of 0.01-10 s-1 on a Gleeble-1500 thermo-mechanical simulator. The results indicate that the flow stress initially increases to a peak value and then decr
Mat. Res.. Publicado em: 18/02/2014
-
12. Flexural analysis of cross-ply laminated beams using layerwise trigonometric shear deformation theory
In the present work, a layerwise trigonometric shear deformation theory is used for the analysis of two layered (90/0) cross ply laminated simply supported and fixed beams subjected to sinusoidal load. The displacement field of the present theory consists of trigonometric sine function in terms of thickness coordinate to take into account the effect of trans
Lat. Am. j. solids struct.. Publicado em: 2013-07