Structural Engineering
Mostrando 1-12 de 265 artigos, teses e dissertações.
-
1. Effect of Preparation Additives on the Antimicrobial Activity and Cytotoxicity of Polypyrrole
The search for new biomaterials has increased continuously in recent years and, in this context, the application of polypyrrole (PPy) as a promising material for this function has been reported as a result of positive responses, such as bioactivity and biocompatibility. In this study, PPy was obtained through modifications/adaptations made in methodologies o
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
2. Numerical analysis of torsional tangent rigidity of reinforced concrete waffle slab
Resumo Este trabalho de investigação científica aborda a análise da rigidez tangente à torção de lajes nervuradas de concreto armado por meio de comparações da análise numérica com resultados de ensaios experimentais, cujo cálculo foi feito no programa ATENA. Tal programa foi desenvolvido especialmente para cálculo de estruturas de concreto arma
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
3. Performance Analysis of Small Grid Connected Photovoltaic Systems
Abstract The acceptance and deployment of electric power from sustainable sources, which are less polluting than fossils, have been a consensus throughout society. Specially, the growth of the installed capacity in photovoltaic energy has been considerable in distributed generation. In order to properly take advantage of this growing demand, it is necessary
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
4. SORM DG - an efficient SORM based on differential geometry
Abstract The first order reliability method (FORM) efficiently performs first order structural reliability analysis, but with limited accuracy. On the other hand, the traditional second order reliability method (SORM) was established to improve the results of FORM, but with a supplementary computational process. Proposed herein, is a new SORM, based on diffe
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
5. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
6. Analysis of the contribution of the block-soil contact in piled foundations
Abstract Geotechnical engineering has often been challenged by demands from technically and economically bold construction projects, such as that of tall buildings. The architectural requirements of these buildings have increased and concentrated the loads from structural systems without proportionally increasing plant area. New forms of using load capacity
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
7. Study on impact of fiber hybridization in material properties of engineered cementitious composites
ABSTRATO Compósito Cimentício Projetado (ECC) é um tipo de compósitos cimentícios reforçados com fibras de alto desempenho melhorados com bom comportamento de tração, compressão e flexão. O ECC é conhecido por seu comportamento de endurecimento de tensão sob tensão e tem sido cada vez mais aplicado na prática de engenharia. O processo de adicio
Matéria (Rio J.). Publicado em: 10/06/2019
-
8. Desenvolvimento de uma máquina para ensaio de fadiga por flexão
RESUMO O conhecimento acerca das propriedades mecânicas dos materiais é de grande importância para aplicações de engenharia. O estudo dessas propriedades é necessário para o desenvolvimento de novos equipamentos ou produtos e uma importante propriedade é a resistência à fadiga. O objetivo deste trabalho é apresentar o projeto e construção de uma
Matéria (Rio J.). Publicado em: 20/05/2019
-
9. Recent Topics on the Structure and Crystallization of Al-based Glassy Alloys
Al-based glassy alloys (metallic glasses) have been of great scientific and technological interest as a high specific strength and high corrosion resistant materials. However, the low glass-forming ability (GFA) is still a choke point that greatly influences the applications. In order to further comprehend the glass formation mechanism and investigate the po
Mat. Res.. Publicado em: 28/02/2019
-
10. Experimental and numerical investigation on the shock characteristics of U-notched ZL205A specimens under dynamic mixed-mode loading
Abstract Shock environment assessment and improvement during stage separation is an important issue of concern in aerospace engineering. This paper focuses on shock response caused by dynamic fracture of aluminum alloy separation plate, which usually undergoes mixed mode loading during separation. Based on Split Hopkinson Tensile Bar (SHTB) apparatus, five g
Lat. Am. j. solids struct.. Publicado em: 01/11/2018
-
11. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
12. Estimación de propiedades mecánicas de chapa de acero inoxidable 304L mediante ensayos SPT
ABSTRACT The mechanical characterization of materials by small specimen testing has growing interest in Structural Engineering. Small Punch Test (SPT) is applied to estimate mechanical properties of samples that can be extracted from components or structures without affecting service operation. In this paper the development of the test device is reported, co
Matéria (Rio J.). Publicado em: 19/07/2018