Surface Morphology
Mostrando 1-12 de 1082 artigos, teses e dissertações.
-
1. Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina
In this paper, a pre-treatment process for electroless copper (Cu) deposition on the polished alumina (Al2O3) 99.9% and the behavior of Cu plating by electroless process after Al2O3 surface treatment were explored. Our work was carried out by changing the roughness of Al2O3 through micro-etching (coarsening), nucleation its surface by a two-step method (sens
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. 3D Simulation and Artificial Neural Networks Application in the Diffusion Study of Champignon Mushroom/Solution Interface During the Salting
The influence of the film formed during the salting of champignon mushrooms with brine containing NaCl and KCl was modeled using the finite elements method (FEM). It was verified that the film formed on the mushroom surface had a greater influence in the static salting since the diffusion of the ions was 7.5-fold smaller in this system than in the stirred sa
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Alumina applied in bone regeneration: Porous α-alumina and transition alumina
Abstract Alumina is a polymorphic bioceramic that has been extensively investigated for application in bone regeneration. Dense α-alumina has been considered a suitable biomaterial for dental and orthopedic implants due to its superior mechanical properties. However, its use is limited due to its high inertia in a biological environment. Recent investigatio
Cerâmica. Publicado em: 2022
-
4. Evaluation of different protocols for culturing mesenchymal stem cells derived from murine bone marrow
ABSTRACT Introduction: Culturing bone marrow mesenchymal stem cells (BM-MSCs) is a key point in different fields of research, including tissue engineering and regenerative medicine and studies of the bone marrow microenvironment. However, isolating and expanding murine BM-MSCs in vitro has challenged researchers due to the low purity and yield of obtained c
Hematology, Transfusion and Cell Therapy. Publicado em: 2022
-
5. Characterization and potential applications of new boron-phosphate glass in the CaO-P2O5-K2O-B2O3 system
Abstract Boron phosphate glasses are known for their unique properties and have been investigated as biodegradable materials for biomedical applications. In this context, the present research studied the characterization of physical, mechanical, and bioactive properties of new boron-phosphate glass in the CaO-P2O5-K2O-B2O3 system produced by the melt-quenchi
Cerâmica. Publicado em: 2022
-
6. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
7. Boosting the Photocurrent of the WO3/BiVO4 Heterojunction by Photoelectrodeposition of the Oxy-Hydroxide-Phosphates Based on Co, Fe, or Ni
Here we investigated the photoelectrodeposition of oxygen-evolving catalysts (OECs) based on oxy-hydroxides-phosphates of Co, Fe, or Ni (CoPi, FePi, and NiPi) on the WO3/BiVO4 heterojunction and their activity in water oxidation. The OECs were deposited by cycles of (i) open-circuit potential (OCP) and (ii) applying a potential positive enough to oxidize the
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Evaluation of ocular psoriasis with meibography
Abstract Background: Previous studies has shown that dry eye test abnormalities, meibomian gland dysfunction (MGD), may occur in psoriasis. Objectives: The authors aimed to evaluate the dry eye disease (DED), MGD, in psoriasis patients with meibography which is a current, objective, noninvasive method for patients with meibomian gland diseases, to investig
Anais Brasileiros de Dermatologia. Publicado em: 2022
-
9. A Comparison of the Photolytic and Photocatalytic Degradation of Triclosan: Identification of Transformation Products and Ecotoxicity Evaluation
Triclosan (5-chloro-2-(2,4-dichlorophenoxy)phenol) is commonly used as an antibacterial agent in various industrial products and is often detected in wastewater effluent. Comparison was made for triclosan degradation by photolysis and TiO2 photocatalysis (under UV irradiation (125 W)) based on analysis of transformation products, together with ecotoxicity ev
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
10. Purification of raw palygorskite: a comparative study involving different processes and dispersing agents
Abstract Palygorskite (Pal) is a natural clay mineral with fibrous morphology and high surface area. Depending on the geological origin, it presents impurities, such as quartz and carbonates, which can harm some of its properties. Therefore, this work seeks to define a viable methodology for the purification of a Brazilian Pal. Two types of mixing processes
Cerâmica. Publicado em: 2021-06
-
11. Characterization of TiO2 Nanoparticle’s Morphology and its Influence on the Hydrogen Sorption Kinetics of MgH2
TiO2 nanorods present good performance as catalysts in the sorption behavior of magnesium hydride. In the present study, the morphology of TiO2 nanorods produced from titanate nanotubes heat-treated at 550 °C (NR550), 650 °C (NR650) and 750 °C (NR750) was characterized and their catalytic role on the sorption kinetics of MgH2 was evaluated. For this, ball
Mat. Res.. Publicado em: 20/12/2019
-
12. Morphology, Crystalline Structure and Chemical Composition Of MAO Treated Ti-15Zr-Mo Surfaces Enriched with Bioactive Ions
In this study, MAO treatment was used to enrich, with bioactive Ca, Mg and P atoms, as-casted and heat-treated Ti-15Zr-xMo (x = 0, 5, 10 and 15 wt%) alloys, for potential use as advanced metallic biomaterials. The chemical composition of the surface was evaluated by EDS and XPS measurements. The morphology and microstructure was analyzed by OM and SEM images
Mat. Res.. Publicado em: 09/12/2019