Tailings Recovery
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Development of innovation routes for iron ore using high intensity magnetic separators
Abstract The mineral processing of low-grade iron ores commonly generates large volumes of slime, which are disposed as tailings. Modern mining requires strives to eliminate the use of tailings dams in a maximum effort to increase metallurgical recovery, the security and reduction of the operational cost. This research aims for the recovery of iron contained
REM - International Engineering Journal. Publicado em: 2022
-
2. The BigFLUX Magnetic Matrix Technology
Abstract The Magnetic separation of ultra-fine ore particles has always posed a challenge to the JONES/WHIMS process. Despite many advances in this technology, no effective improvement has been made to its core component: The Magnetic Matrix. The current approach to separate ultra-fine particles teaches that the gap of the matrix and its teeth size must be s
REM - International Engineering Journal. Publicado em: 2022
-
3. Mapping of areas suitable for the application of biosolids in the Quadrilátero Ferrífero region, Minas Gerais, Brazil
Abstract The recovery of degraded areas is imperative for the sustainability of mining activities. The main action implemented to improve the chemical, physical and biological conditions of soils, tailings and sterile deposits is the incorporation of organic material. Biosolids (hygienized sewage sludge) are among the organic materials that can be applied. H
REM - International Engineering Journal. Publicado em: 2022
-
4. Production of paste from fine tailings streams in a laboratory scale column thickener
Abstract The final disposal of tailings in the form of paste is a technological alternative. The objective of the present study is to obtain knowledge and compare different operational conditions that are favorable to the production of paste with the fine tailings generated after final desliming stage, obtained from the processing of metallic and non-metalli
REM, Int. Eng. J.. Publicado em: 2021-01
-
5. Not even Freud explains this!
Abstract The final disposal of tailings in the form of paste is a technological alternative. The objective of the present study is to obtain knowledge and compare different operational conditions that are favorable to the production of paste with the fine tailings generated after final desliming stage, obtained from the processing of metallic and non-metalli
REM, Int. Eng. J.. Publicado em: 2021-01
-
6. Forecasting mass and metallurgical balance at a gold processing plant using modern multivariate statistics
Abstract Knowing the quantity and the quality of products and tailings generated by a beneficiation plant, even before ore processing, can make the mining operations more sustainable, more profitable, and safer. To forecast these values, it is necessary to submit samples to batch tests which mimic the processing workflow used on an industrial scale. Then, th
REM, Int. Eng. J.. Publicado em: 2020-12
-
7. Dimensional design of the barometric leg of a flotation column: a key to operational stability
Abstract The inefficiency in controlling the slurry/froth interface level of a scavenger column flotation stage was severely impairing the process performance of an iron mining company, increasing the iron content in the tailings to levels above 20% and, consequently, not meeting the company's iron recovery and pellet feed production targets. Based on mass b
REM, Int. Eng. J.. Publicado em: 2020-03
-
8. Mineralogical Characterization of Iron Ore Tailings from the Quadrilatero Ferrifero, Brazil, by Eletronic Quantitative Mineralogy
The mineralogical characterization studies search for the best processing route, with the lowest environmental impact, aiming to improve the use of mineral resources. The electronic quantitative mineralogy (EQM) provides quickly and accurately great information about the characteristics of these materials. This work aims to characterize iron ore tailings by
Mat. Res.. Publicado em: 02/12/2019
-
9. Desastre socioambiental e Termo de Transação e Ajustamento de Conduta (TTAC) como instrumento de política pública: O caso da barragem de Fundão, MG
Resumo: Este artigo inscreve-se na agenda de pesquisa dedicada à compreensão dos processos de governança e participação social nas políticas públicas que estão sendo formuladas e implementadas visando à reparação da bacia do rio Doce, localizada nos estados brasileiros de Minas Gerais e Espírito Santo, em razão do desastre socioambiental de gran
Civitas, Rev. Ciênc. Soc.. Publicado em: 16/09/2019
-
10. Recovery of pellet feed from tailings dams
Abstract Not long ago, certain iron ore processing plants in Brazil were unable to efficiently recover iron ore fines and, as a result, operated only with high grade iron ore. For this reason, material stored in some iron ore tailings dams have considerable amounts of iron content with a potential to produce pellet feed fines through a concentration process.
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
11. Determination of maximum zinc recovery of Vazante mine ore by flotation process
Abstract Nowadays, Nexa Resources (ex-Votorantim Metais) operates two zinc mines in Brazil, represented by the Vazante unit in Vazante - MG and the Morro Agudo unit in Paracatu - MG. The present study was carried out at the Vazante unit, where zinc concentrate is produced from a silicate ore called Willemite (Zn2SiO4) through froth flotation processes. The t
REM, Int. Eng. J.. Publicado em: 2019-06
-
12. Behavior of the chromite tailings in a centrifugal concentrator (FALCON)
Abstract The application of the centrifugal concentration gains importance in the world scenario, considering the low environmental impact and the concentration of fine particles. Literature does not present articles using centrifugal concentration (Falcon) for chromite. The material used in the tests is the tailings from a Northeastern Brazil concentration
REM, Int. Eng. J.. Publicado em: 2019-03