Thermal Cycling
Mostrando 1-12 de 100 artigos, teses e dissertações.
-
1. Effect of Hydrofluoric Acid Concentration and Thermal Cycling on the Bond Strength of Brackets to Ceramic
Resumo Este estudo avaliou os efeitos de diferentes concentrações de ácido hidrofluorídrico (HF) e ciclagem térmica na resistência de união ao cisalhamento (RUC) de bráquetes metálicos a cerâmica. Cilindros da cerâmica feldspática foram divididos em 10 grupos (n=15). De acordo com as concentrações do ácido HF: 1-1%;2-2,5%;3-5%;4-7,5%; e, 5-10%
Braz. Dent. J.. Publicado em: 28/11/2019
-
2. Microstructure and Thermal Analyses of Cu87-xAl13Nbx High-Temperature Shape Memory Alloys
This paper presents a thermal and microstructural characterization of Cu87-xAl13Nbx (wt%) high temperature shape memory alloys (HTSMA), with Nb contents ranging from 1 to 3%. The alloys were obtained by arc melting under argon atmosphere. Thermal characterization was performed by differential scanning calorimetry (DSC), revealing that the phase martensitic t
Mat. Res.. Publicado em: 28/11/2019
-
3. Proposição de um Modelo Empírico para Determinação das Temperaturas Críticas Durante Resfriamento Contínuo em Zonas Termicamente Afetadas de Aços IF Soldados pelo Processo TIG
Resumo Aços IF são amplamente empregados na indústria automobilística. No decorrer das aplicações de soldagem, eles passam pela transformação de fase austenita (γ) → ferrita (α) que ocorre por nucleação e crescimento de grão e, em condições isotérmicas, é descrita pela equação JMAK. Todavia, as transformações de fases pós-soldagem ac
Soldag. insp.. Publicado em: 23/09/2019
-
4. Avaliação da susceptibilidade de precipitação da fase sigma na soldagem do aço inoxidável duplex SAF2205
RESUMO A soldagem de aços inoxidáveis duplex é uma operação crítica, devido aos ciclos térmicos aos quais o material é submetido, que podem favorecer a precipitação de fases deletérias. Nesse contexto, objetivo dessa pesquisa é analisar a influência da energia de soldagem na susceptibilidade à formação de fase sigma no aço duplex SAF2205. As
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Biomechanical development and evaluation of a new framework for all-on-four rehabilitation
Resumo Introdução Para reabilitação de mandíbulas totalmente edêntulas, a opção por carga imediata determina a utilização de próteses provisórias que esplintem os implantes instalados. Apesar de provisórias com reforço proverem as reabilitações com benefícios biomecânicos, a não adoção desta indicação coexiste em diferentes estudos so
Rev. odontol. UNESP. Publicado em: 29/07/2019
-
6. Escolha das Energias de Soldagem para Aplicação na Técnica da Dupla Camada na Soldagem do Aço ASTM 131 Grau AH 36
Resumo Durante o processo de soldagem o aço microligado ASTM A131 Grau AH36 pode apresentar defeitos oriundos dos ciclos térmicos (distorções) que demandarão procedimentos onerosos como o tratamento térmico pós-soldagem. Somando-se a isto, este aço não é indicado a sofrer normalização, normalização seguida por revenimento, ou por têmpera e rev
Soldag. insp.. Publicado em: 09/05/2019
-
7. The Influence of Isothermal Holding Times on Microstructural Evolution of X90 Linepipe Steel
Microstructural phase of linepipe steels depends on different isothermal conditions. Thermal cycling testing of X90 linepipe steel was conducted using a thermomechanical simulator. The results have shown that with increased holding time, the microstructure constituents change from the martensite and bainitic ferrites to granular bainite and polygonal ferrite
Mat. Res.. Publicado em: 28/03/2019
-
8. Evaluation of some oxidative-stress and antioxidant markers in goats during estrous cycle under Egyptian environmental conditions
ABSTRACT The objective of this study was to explore the impact of thermal stress on hormonal level and antioxidant activity in goats during various phases of the estrous cycle in the Egyptian summer. Forty cycling does were allocated to two groups (20 animals each) divided by season (mild/hot). Daily meteorological, rectal temperature, and respiratory rate d
R. Bras. Zootec.. Publicado em: 03/05/2018
-
9. Effect of Acid Etching, Silane and Thermal Cycling on the Bond Strength of Metallic Brackets to Ceramic
Resumo O objetivo neste estudo foi avaliar o efeito de diferentes silanos, ciclagem térmica e condicionamento ácido na resistência da união ao cisalhamento (RUC) de bráquetes metálicos a cerâmica feldspática. Cilindros da cerâmica feldspática (Grupos 1, 2, 5 e 6) foram condicionados por 60 s com ácido hidrofluorídrico a 10% e os Grupos 3, 4, 7 e
Braz. Dent. J.. Publicado em: 2016-12
-
10. Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements
ABSTRACT Objective The study aimed to evaluate effects of air abrasion with alumina or glass beads on bond strengths of resin cements to CAD/CAM composite materials. Material and Methods CAD/CAM composite block materials [Cerasmart (CS) and Block HC (BHC)] were pretreated as follows: (a) no treatment (None), (b) application of a ceramic primer (CP), (c)
J. Appl. Oral Sci.. Publicado em: 2015-12
-
11. MCM-41 for Meloxicam Dissolution Improvement:
in vitro Release and in vivo Bioavailability StudiesIn this study, MCM-41 was prepared as a carrier for poorly water soluble drugs. Meloxicam (MLX) was selected as model compound. Textural and chemical characterizations were carried out by thermal gravimetric analysis (TGA), scanning electron microscope (SEM), nitrogen adsorption/desorption, X-ray diffraction (XRD) and Fourier transform infrared (FTIR). Th
J. Braz. Chem. Soc.. Publicado em: 2015-07
-
12. MODELING AND SIMULATION OF THE EFFECT OF THE FIRING CURVE ON THE LINEAR SHRINKAGE OF CERAMIC MATERIALS: LABORATORY SCALE AND INDUSTRIAL SCALE
AbstractSingle-cycle firing is currently the most widespread method used for the production of ceramic tile. The productivity is directly related to the performance of the constituent materials of the ceramic piece during thermal cycling. Numerical tools which allow the prediction of the material behavior may be of great help in the optimization of this stag
Braz. J. Chem. Eng.. Publicado em: 2015-06