Thermal Stresses
Mostrando 1-12 de 103 artigos, teses e dissertações.
-
1. Hydroponic cultivation of coriander intercropped with rocket subjected to saline and thermal stresses in the root-zone
ABSTRACT An experiment was carried out in a randomized blocks design, aiming at evaluation of the cultivation of coriander intercropped with rocket subjected to saline and thermal stresses in the root-zone. Six treatments were evaluated, as follows: four treatments consisted of the combinations of two levels of electrical conductivity of water (ECw 0.3 and 6
Revista Ceres. Publicado em: 2022
-
2. Assessment of an anti-ageing structured cosmetic formulation containing goji berry
Based on previous studies, it has been found that goji berry (GB), popularly known as a ‘miracle fruit’, has excellent antioxidant potential and can be used in the treatment of skin disorders associated with ageing. This study aimed to incorporate GB into a structured cosmetic in order to optimise its penetration. Stability studies of the formulation, de
Braz. J. Pharm. Sci.. Publicado em: 20/12/2019
-
3. Impacto nas Propriedades Mecânicas e Tensões Residuais do Material ASTM A572 Grau 50 Soldado por Arco Submerso com Alívio de Tensões Térmico
Resumo O aço ASTM A572 Grau 50 é utilizado na fabricação de conjuntos soldados para aerogeradores, por este motivo, a realização de alívio de tensões é de grande importância para correção dos impactos causados pelos processos de soldagem, bem como, o conhecimento das propriedades finais obtidas com a realização deste processo. O objetivo desse
Soldag. insp.. Publicado em: 02/12/2019
-
4. Thermo-mechanical analysis of mass concrete elements made of rubberized concrete
Resumo Neste estudo, foram avaliadas amostras de concreto massa com borracha (concreto emborrachado) para determinar se a adição de partículas de borracha aumentaria a resistência à fissuração devido a variações volumétricas de origem térmica, em comparação com um concreto de referência, sem borracha. Amostras dos concretos estudados foram inic
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
5. Environmental stress, future climate, and germination of Myracrodruon urundeuva seeds 1
Resumo: Myracrodruon urundeuva, espécie nativa da Caatinga e de ampla distribuição geográfica, apresenta relevante valor socioeconômico. Objetivou-se avaliar a influência de estresses ambientais sobre a germinação de lotes de diferentes safras de M. urundeuva. Foram testadas as temperaturas constantes de 10 a 40 °C e potenciais osmóticos de 0 a -0,
J. Seed Sci.. Publicado em: 2019-01
-
6. Synthetic granite composite for precision equipment structures
ABSTRACT The structure is a component that plays an extremely important role in the equipment’s performance, it must withstand efforts without compromising the function, receive and transfer heat, dampen vibrations and position the elements, as well as promote ergonomics and aesthetics. In lightweight and precision equipment’s the raw material used must
Matéria (Rio J.). Publicado em: 06/12/2018
-
7. Nickel-Titanium Alloys Welding of Thin Sheets Using GTAW: Comparative Study Between Similar and Dissimilar Welding with AISI 304 Stainless Steel
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the Gas Tungsten Arc Welding (GTAW) process and to study the mechanical and metallurgical properties of the joints with and without post-welding heat treatment (PWHT). The GTAW process was chose
Mat. Res.. Publicado em: 08/11/2018
-
8. Prediction of Shape Distortions in Composite Wing Structures
Abstract Shape distortions and warpage are a major source of problems for composite manufacturers. These distortions are usually accompanied by built up residual stresses. They can deform a component so that it becomes useless. It also has the capability to reduce the strength of the structure. In this paper, the three-dimensional version of the constitutive
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
9. Effect of blisters and rims on radial hydride precipitation in fuel elements under dry storage conditions
ABSTRACT Hydrogen enters in Zry clads during fuel element life in service; when hydrogen exceeds the terminal solid solubility, circumferential hydrides are precipitated. In the presence of thermal gradients, produced for instance by oxide spallation, localized concentration of hydrides - known as blisters - can be formed. Due to the fact that zirconium hydr
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Estudio Ab-initio de propiedades estructurales, elásticas y electrónicas de nanohilos core/shell
ABSTRACT This Zinc oxide (ZnO) is widely used in different electronic devices due to its thermal, electronic, and piro-piezoelectric properties. Some of these properties are noticeable improvement at the nanoscale, specially when ZnO together with other material create heterostructures. Recently, core/shell nanowires have been synthesized in order to raise t
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Free vibration analysis and design optimization of SMA/Graphite/Epoxy composite shells in thermal environments
Abstract Composite shells, which are being widely used in engineering applications, are often under thermal loads. Thermal loads usually bring thermal stresses in the structure which can significantly affect its static and dynamic behaviors. One of the possible solutions for this matter is embedding Shape Memory Alloy (SMA) wires into the structure. In the
Lat. Am. j. solids struct.. Publicado em: 23/04/2018
-
12. The Back Stress Behavior Study Analyzed in Residual Stress of Welded Naval Plates in Different Lamination Directions and Different Thermal Contributions
The lamination process adds the anisotropy characteristic in the final product. This anisotropy influences the yield strength according to the direction in question, the difference between the value of the yield tension in one direction and the value of the yield tension in another direction referred to as the back stress. Naval plates were welded by the GMA
Mat. Res.. Publicado em: 18/12/2017