Thermocouple
Mostrando 1-12 de 66 artigos, teses e dissertações.
-
1. Thermal Dissipation Effect on Temperature-controlled Friction Stir Welding
Resumo Durante a Soldagem por Fricção linear (FSW) de geometrias complexas, a dissipação térmica, induzida por características geométricas ou pelo ambiente circundante, desempenha um papel importante na qualidade final da junta. Para garantir uma qualidade consistente em condições diferentes é necessário a adaptacão de parâmetros durante o proce
Soldag. insp.. Publicado em: 25/11/2019
-
2. Effect of gallic acid addition on some mechanical properties of self-adhesive resin cements
Abstract Self-adhesive resin cements (RCs) activate matrix metalloproteinase (MMP) and cathepsin-related collagen degradation, and gallic acid (GA) inhibits the activity of both MMPs and cysteine cathepsins. The purpose of this study was to evaluate the setting time, biaxial flexural strength, and Vickers hardness of self-adhesive RCs after the addition of t
Braz. oral res.. Publicado em: 09/09/2019
-
3. Equipamento Automatizado de Soldagem Capacitiva para Termopares
Resumo Os termopares são dispositivos elétricos de simples concepção utilizados na medição de temperatura, e possuem um grande uso na indústria. O termopar necessita de uma junção eficiente para os dois fios metálicos que o compõem, que comumente é feita pela soldagem. O processo de soldagem utilizado para construir um termopar pode ser feito de
Soldag. insp.. Publicado em: 15/08/2019
-
4. Effect of different stripping techniques on pulpal temperature: in vitro study
RESUMO Introdução: o desgaste proximal do esmalte é um procedimento clínico rotineiro utilizado na Ortodontia para se criar espaços ou equilibrar discrepâncias de tamanho dentário. Esse procedimento pode resultar em transferência de calor para a polpa, predispondo-a a mudanças histopatológicas e necrose do tecido pulpar. Objetivo: medir as mudan
Dental Press J. Orthod.. Publicado em: 2019-02
-
5. Heat Treatment of Sintered Valve Seat Inserts
The characterization of sintered valve seat inserts (VSIs) after being subjected to different heat treatment operations has been carried out. The VSIs were obtained from three different alloys by mixing iron powder with AISI M3:2, AISI M2 high-speed steels, and AISI D2 tool steel. After sintering, the VSI were quenched in air followed by double tempering at
Mat. Res.. Publicado em: 02/08/2018
-
6. Método innovador de ensayos de impacto en altas temperaturas aplicado en aceros al carbono
ABSTRACT In this paper, an innovative method of impact tests at high temperature on sub-size Charpy V notched specimens is applied. The innovation lies in the method of heating the specimen, which is performed in situ on a Charpy impact machine type by alternating electrical current through the specimen. The specimens are heated in a few seconds (v=32 ºC/s)
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. Hourly, Daily, and Monthly Soil Temperature Fluctuations in a Drought Tolerant Crop
ABSTRACT Soil temperature is a physical property of great agricultural importance in the soil-plant relationship and in energy exchange with the atmosphere. This study was conducted in a degraded Cambissolo Háplico Ta Eutrófíco (Cambisol; Inceptisol) in the Irecê Identity Territory, Bahia, Brazil, aiming to evaluate the hourly, daily, and monthly fluctua
Rev. Bras. Ciênc. Solo. Publicado em: 22/01/2018
-
8. Microwave-Assisted Oxidation of Organic Matter Using Diluted HNO 3 under O 2 Pressure: Rationalization of the Temperature Gradient Effect for Acid Regeneration
Oxidation using diluted HNO3 solution is dependent on reactions taking place in the gas phase, resulting in HNO3 regeneration, thus allowing sub stoichiometric reactions (16.7 mmol of C oxidized with 10.4 mmol of HNO3). Reactions for HNO3 regeneration are dependent on temperature gradient along reaction vessel. Thermographic images were obtained of external
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
9. Evaluation of temperature increase during in-office bleaching
ABSTRACT The use of light sources in the bleaching process reduces the time required and promotes satisfactory results. However, these light sources can cause an increase in the pulp temperature. Objective The purpose of the present study was to measure the increase in intrapulpal temperature induced by different light-activated bleaching procedures with a
J. Appl. Oral Sci.. Publicado em: 2016-04
-
10. Determination of Mn2+ ion by solution scanometry as a new, simple and inexpensive method
In this research, scanometry was used as a new, simple, fast and inexpensive method for a colorimetric determination of Mn2+ ion in water samples and thermocouple wire through the use of periodate reagent in an acidic medium. The results showed the oxidization of colorless Mn2+ ion by periodate and the formation of a purplish MnO4- ion. The system had a line
Quím. Nova. Publicado em: 2014
-
11. ESTUDO EXPERIMENTAL DA COMBUSTÃO DO GLP E GLICEROL RESIDUAL DERIVADO DA PRODUÇÃO DE BIODIESEL EM MEIOS POROSOS RADIANTE / EXPERIMENTAL STUDY OF LPG COMBUSTION OF GLYCEROL AND RESIDUAL DERIVED FROM BIODIESEL PRODUCTION IN RADIANT POROUS MEDIA
The increasing production of biodiesel has caused increased production of residue glycerol. The large amount of glycerin (our glycerol) in the market causes a surplus unusable commercially and industrially, which should give a correct destination. At this point, the porous combustion is characterized by burning within an inert medium, to the pollutants reduc
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/05/2012
-
12. Experimental Determination of Temperature During Rotary Friction Welding of AA1050 Aluminum with AISI 304 Stainless Steel
Abstract: The purpose of this study was the temperature monitoring at bonding interface during the rotary friction welding process of dissimilar materiais: AA1050 aluminum with AISI 304 stainless steel. As it is directly related to the mechanical strenght of the junction, its experimental determination in real time is of fundamental importance for understand
J. Aerosp. Technol. Manag.. Publicado em: 2012-03