Thermoelectric Materials
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. Evolución microestructural in-situ a alta temperatura de depósitos de soldadura de aceros 9Cr con diferentes contenidos de boro
ABSTRACT New alloys have been developed for enhancing the performance of the equipment used in thermoelectric power generation industry. With the objective of increasing the creep resistance of these materials, changes in the content of some microalloying elements were carried out. Boron bearing in creep strength enhanced 9Cr steel (CSE9Cr) welds improved ma
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Hysteretic Behavior of Twin Boundary Peak Due to Precipitation in Co-Ni-Cr alloy
Anelastic behavior and microstructural changes of a Co-Ni-Cr super-alloy were monitored over the temperature range 250-950ºC, by using several complementary techniques. Two grades of this alloy were used, differing by the presence of small quantity of beryllium (<1.5% at.). Thermoelectric power reveals two distinct precipitation stages. The first precipitat
Mat. Res.. Publicado em: 02/07/2018
-
3. Experimental Study of the Tl4PbTe3-Tl9TbTe6-Tl9BiTe6 Section of the Tl-Pb-Bi-Tb-Te System
The aim of the present study was to determine the phase relations in the Tl4PbTe3-Tl9TbTe6-Tl9BiTe6 section of the Tl-Pb-Bi-Tb-Te system. Based on a set of the methods of the physicochemical analysis (differential thermal analysis, powder X-ray diffraction method as well as microhardness measurements), the phase diagram of the Tl4PbTe3-Tl9TbTe6 boundary syst
Mat. Res.. Publicado em: 28/05/2018
-
4. History of development of thermoelectric materials for electric power generation and criteria of their quality
An analysis of results, obtained in the development of thermoelectric materials for electricity generation during the last 130 years, shows that they are comparable to those obtained as early as the nineteenth century. One of the main factors responsible for the stagnation in this area is the use of inappropriate criteria for the evaluation of material quali
Mat. Res.. Publicado em: 2014-10
-
5. Reação de desinserção em SbxCoSb3-x
O composto SbxCoSb3-x foi produzido em altas pressões e altas temperaturas em uma reação de auto-inserção a partir da escuterudita binária CoSb3. A reação de auto-inserção é caracterizada pelo colapso de átomos de Sb para o sítio 2a, no interior das cavidades formadas pelos átomos de Co e Sb na estrutura da escuterudita. A reação inversa, de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 16/07/2010
-
6. Estudo das propriedades termoelétricas de fios quânticos de telureto de chumbo / Study of thermoelectrical properties in lead telluride quantum wires
This work presents a theoretical study of the electronic and thermoelectric properties of PbTe quantum wires. Thermoelectric effects in nanostructured materials of IV-VI family, in particular superlattices, quantum well and quantum wire, have been studied a lot, because they present an enhancement in figure of merit relatively to bulk. Researching theoretica
Publicado em: 2010
-
7. Estudo das propriedades termoelétricas de fios quânticos de telureto de chumbo / Study of thermoelectrical properties in lead telluride quantum wires
Neste trabalho é apresentado um estudo teórico das propriedades eletrônicas e termoelétricas de fios quânticos de PbTe. Efeitos termoelétricos em materiais nanoestruturados da família IV-VI, em particular super-redes, poços e fios quânticos, têm sido muito estudados por apresentarem um aumento no valor da figura de mérito em relação ao bulk (mat
Publicado em: 2010
-
8. Caracterização de ligas binárias nanoestruturadas dos sistemas Zn-Sb, Ge-Sb, Al-Sb e Co-Sb produzidas por síntese mecânica
Synthesis and study of nanostructured materials have generated great interest by the scientific point of view due to several new possibilities of technological applications. In this Doctoral thesis, nanostructured semiconductors with thermoelectric potential of Zn-Sb and Co-Sb systems, alloys of Al-Sb system and solid solutions of Ge-Sb system were produced.
Publicado em: 2009
-
9. Estudo de um sistema de análise de preferências climáticas para animais convencionais de laboratório por tecnologia de ventilação microambiental e avaliações biológicas. I. Avaliação da eficiência de um protótipo, para o estudo de parâmetros ambientais, resultados parciais verificados em ratos (Rattus norvegicus) / A climatic chamber employing Intracage Ventilation System to evaluated house condition of laboraroty animals and to biological assays in thermoregulation studies. Partial evaluation in rats (Rattus norvegicus)
Projects concerned with laboratory animals facilities usually adopt narrow range of ventilation and climatization variables to assure the define ambient. Such projects are concerned to the animal room (macro-environmental ambient) and this technology have a limitated operation to reach the micro-environmental (animal cages) ambients. The development of the i
Publicado em: 2009
-
10. New physical interpretation of thermoelectric cooling in semiconductor structures
Nontraditional approach to explain the thermoelectric cooling is suggested . It is based on the Le Chatelier-Braun thermodynamic principle. New effect of cooling and heating of junction of two materials (barrierless thermoelectric cooling) is theoretically predicted, and this effect is different from the Peltier effect (barrier thermoelectric cooling). The s
Brazilian Journal of Physics. Publicado em: 2006-09
-
11. Desenvolvimento de um atuador de posição baseado em liga de memória de forma com resfriamento forçado. / Development of a position actuator based on a shape memory alloy with forced cooling.
Shape Memory Alloys (SMA) consist of a group of metallic materials that demonstrate the ability to return to some previously defined shape when subjected to the appropriate thermal cycle, due to shift in the materials crystalline structure. The change that occurs within SMAs crystalline structure is not a thermodynamically reversible process and results in h
Publicado em: 2006
-
12. The best thermoelectric.
What electronic structure provides the largest figure of merit for thermoelectric materials? To answer that question, we write the electrical conductivity, thermopower, and thermal conductivity as integrals of a single function, the transport distribution. Then we derive the mathematical function for the transport distribution, which gives the largest figure