Tio2 Nanoparticles
Mostrando 1-12 de 71 artigos, teses e dissertações.
-
1. PHOTODEGRADATION OF RhB UNDER VISIBLE LIGHT BY PT/TIO2 NANOPARTICLES PREPARED THROUGH PHOTOREDUCTIVE DEPOSITION PROCESS
Pt/TiO2 nanoparticles were prepared by a simple two-step aqueous solution method, which consists of a low temperature hydrothermal step and a photoreduction deposition step. The as-prepared samples were characterized by XRD, TEM, XPS, UV-vis, and BET techniques. The as-prepared samples exhibited enhanced photocatalytic activity towards the degradation of rho
Quím. Nova. Publicado em: 2021-03
-
2. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
3. Effects of addition of engineered ZnO nanoparticles on the stability of colloidal suspensions containing TiO2 interacting with sandy soil
Abstract The stability of colloidal suspensions of engineered nanoparticles in the environment is of great interest for the risk assessment and treatment of hazardous materials. The relevance of this study is due to the evidence that engineered nanoparticles have been produced and used in commercial products in large scale, especially ZnO and TiO2, which are
REM, Int. Eng. J.. Publicado em: 2020-06
-
4. Synthesis, Characterization and Photocatalytic Activity of Au/SiO2@TiO2 Core-Shell Microspheres
By using HAuCl4 as the gold precursor, spherical Au@SiO2/TiO2 core-shell nanostructures were prepared with the sol-gel method and ethanol reflux. The preparation process was convenient and fast. The obtained samples were characterized by UV-Vis, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TE
J. Braz. Chem. Soc.. Publicado em: 2020-03
-
5. Characterization of TiO2 Nanoparticle’s Morphology and its Influence on the Hydrogen Sorption Kinetics of MgH2
TiO2 nanorods present good performance as catalysts in the sorption behavior of magnesium hydride. In the present study, the morphology of TiO2 nanorods produced from titanate nanotubes heat-treated at 550 °C (NR550), 650 °C (NR650) and 750 °C (NR750) was characterized and their catalytic role on the sorption kinetics of MgH2 was evaluated. For this, ball
Mat. Res.. Publicado em: 20/12/2019
-
6. Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution
Utilizing high chromium and nickel content in AISI 304 steel confers its good corrosion resistance. However, the high content of chromium and nickel increases the steel susceptibility to corrosion caused by the high concentration of chlorine. Consequently, the electrochemical and mechanical performance of the steel degrades. In this study, the effect of addi
Mat. Res.. Publicado em: 02/12/2019
-
7. Nanostructured Systems Obtention Using LbL Self-Assembly or the Cysteine-Assisted Adsorption Method and Their Application as a Water Splitting Single Catalyst
The present work evaluated the effect on charge transfer in functionalized TiO2 nanostructured systems using different binders. We highlight the conditions required to form self-assembled systems by varying the number of layers, as well as by substituting them for an organic binder, cysteine. Additionally, we study the pH effect of the precursor solution (HA
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
8. Gold Catalysis for Selective Hydrogenation of Aldehydes and Valorization of Bio-Based Chemical Building Blocks
Gold catalysts are best known for their selectivity in oxidation reactions, however, there is a promising future for gold in selective hydrogenations. Herein, the hydrogenation of several aldehydes and important bio-based chemical building blocks, namely 5-hydroxymethylfurfural (5-HMF), furfural and vanillin, was performed throughout the combination of Au na
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
9. Ameliorative effects of TiO2 nanoparticles and sodium nitroprusside on seed germination and seedling growth of wheat under PEG-stimulated drought stress
Resumo: A germinação de sementes e o crescimento inicial de plântulas são sensíveis ao estresse hídrico no trigo. O delineamento experimental foi inteiramente casualizado, com três repetições, para estudar os impactos de nanopartículas de TiO2 (NPs de TiO2: 0, 500, 1000 e 2000 mg.L) e nitroprussiato de sódio (SNP: 0 e 100 μM), como NO doador, na
J. Seed Sci.. Publicado em: 09/09/2019
-
10. Genotoxicity of titanium dioxide nanoparticles and triggering of defense mechanisms in Allium cepa
Abstract Titanium dioxide nanoparticles (TiO2NPs) are widely used and may impact the environment. Thus, this study used a high concentration of TiO2NP (1000 mg/L) to verify the defense mechanisms triggered by a plant system – an indicator of toxicity. Furthermore, this study aimed at completely characterizing TiO2NP suspensions to elucidate their toxic beh
Genet. Mol. Biol.. Publicado em: 27/06/2019
-
11. Self-assembly modification of polyamide membrane by coating titanium dioxide nanoparticles for water treatment applications
Resumo O principal objetivo do presente estudo foi modificar a superfície de uma membrana de poliamida comercial com a deposição de nanopartículas de TiO2 pelo método self-assembly sob pressão com alta permeabilidade e atividade fotocatalítica. Mudanças nas características da membrana e seu desempenho nas propriedades fotocatalíticas foram avaliado
Rev. Ambient. Água. Publicado em: 20/05/2019
-
12. Encapsulating TiO2 into Polyvinyl Alcohol Coated Polyacrylonitrile Composite Beads for the Effective Removal of Methylene Blue
In this work, novel nanocomposite beads based on polyvinyl alcohol (PVA) coated polyacrylonitrile (PAN) with encapsulation of TiO2 nanoparticles (PPT) were developed successfully via a novel green synthetic method and its methylene blue (MB) removal ability by adsorption was also investigated. As-prepared nanocomposite beads were characterized by different t
J. Braz. Chem. Soc.. Publicado em: 2019-02